← Back to team overview

kernel-packages team mailing list archive

[Bug 1209047] Re: SD Card not loading in Ubuntu 13.04

 

Update on this issue.  I have noticed that after updating system files
the SD Card works until a reboot.  There were updates I installed
tonight and after restarting to complete the updates, the SD Card was
available to me.  I used GParted to partition and format the SD Card and
restarted again only to no long see the SD card.  it had loaded as
/dev/mmcblk0p1.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1209047

Title:
  SD Card not loading in Ubuntu 13.04

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I get the following error when trying to make the drivers to install.
  Is this a known bug, and if so is there a fix being worked for this.
  My current system is a HP Precario DV6 model.  I don't have the exact
  model as the motherboard was recently replaced is is not of the same
  model.

  sam@Sam-HPLaptop:~/Documents/rts_pstor$ sudo make
  [sudo] password for sam: 
  Sorry, try again.
  [sudo] password for sam: 
  sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
  cp -f ./define.release ./define.h
  make -C /lib/modules/3.8.0-27-generic/build/ SUBDIRS= modules
  make[1]: Entering directory `/usr/src/linux-headers-3.8.0-27-generic'
  make[2]: *** No rule to make target `/usr/src/linux-headers-3.8.0-27-generic/arch/x86/syscalls/syscall_32.tbl', needed by `arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h'.  Stop.
  make[1]: *** [archheaders] Error 2
  make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-27-generic'
  make: *** [default] Error 2
  sam@Sam-HPLaptop:~/Documents/rts_pstor$ 

  lspci:
  sam@Sam-HPLaptop:~/Documents/rts_pstor$ lspci
  00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
  00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6620G]
  00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
  00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
  00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
  00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
  00:06.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
  00:10.0 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
  00:10.1 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
  00:11.0 SATA controller: Advanced Micro Devices [AMD] FCH SATA Controller [AHCI mode]
  00:12.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
  00:12.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
  00:13.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
  00:13.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
  00:14.0 SMBus: Advanced Micro Devices [AMD] FCH SMBus Controller (rev 13)
  00:14.1 IDE interface: Advanced Micro Devices [AMD] FCH IDE Controller (rev 40)
  00:14.2 Audio device: Advanced Micro Devices [AMD] FCH Azalia Controller (rev 01)
  00:14.3 ISA bridge: Advanced Micro Devices [AMD] FCH LPC Bridge (rev 11)
  00:14.4 PCI bridge: Advanced Micro Devices [AMD] FCH PCI Bridge (rev 40)
  00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
  00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
  00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
  00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
  00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
  00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
  00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
  00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
  01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [Radeon HD 6600M/6700M/7600M Series]
  02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
  03:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
  04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
  04:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)

  Kernel:
  sam@Sam-HPLaptop:~/Documents/rts_pstor$ uname -r
  3.8.0-27-generic

  dmesg
  [    2.331778] scsi 2:0:0:0: CD-ROM            hp       DVD A  DS8A8SH   KH61 PQ: 0 ANSI: 5
  [    2.341930] tsc: Refined TSC clocksource calibration: 1597.094 MHz
  [    2.341942] Switching to clocksource tsc
  [    2.347533] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  [    2.347540] cdrom: Uniform CD-ROM driver Revision: 3.20
  [    2.347903] sr 2:0:0:0: Attached scsi CD-ROM sr0
  [    2.348314] sr 2:0:0:0: Attached scsi generic sg1 type 5
  [    2.390967] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
  [    2.390973] EXT4-fs (sda1): write access will be enabled during recovery
  [    2.689952] usb 4-2: new full-speed USB device number 2 using ohci_hcd
  [    2.793190] EXT4-fs (sda1): recovery complete
  [    2.795450] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  [    2.854977] usb 4-2: New USB device found, idVendor=138a, idProduct=0018
  [    2.854990] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
  [    2.854997] usb 4-2: SerialNumber: 80be835a704a
  [    2.965687] usb 7-1: new low-speed USB device number 2 using xhci_hcd
  [    2.993124] Adding 7839740k swap on /dev/sda5.  Priority:-1 extents:1 across:7839740k SS
  [    3.016657] usb 7-1: New USB device found, idVendor=03f0, idProduct=0024
  [    3.016699] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  [    3.016706] usb 7-1: Product: HP Basic USB Keyboard
  [    3.016709] usb 7-1: Manufacturer: CHICONY
  [    3.016957] usb 7-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  [    3.032829] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [    3.045595] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  [    3.052226] udevd[394]: starting version 175
  [    3.101751] lp: driver loaded but no devices found
  [    3.161711] mmc1: error -110 whilst initialising SD card
  [    3.162516] usb 3-2: new low-speed USB device number 2 using ohci_hcd
  [    3.210003] hp_accel: laptop model unknown, using default axes configuration
  [    3.334263] usb 3-2: New USB device found, idVendor=1bcf, idProduct=000c
  [    3.334270] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  [    3.334274] usb 3-2: Product: USB Laser Wheel Mouse
  [    3.358317] Bluetooth: Core ver 2.16
  [    3.358372] NET: Registered protocol family 31
  [    3.358375] Bluetooth: HCI device and connection manager initialized
  [    3.358387] Bluetooth: HCI socket layer initialized
  [    3.358391] Bluetooth: L2CAP socket layer initialized
  [    3.358398] Bluetooth: SCO socket layer initialized
  [    3.381192] ppdev: user-space parallel port driver
  [    3.386321] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  [    3.386329] Bluetooth: BNEP filters: protocol multicast
  [    3.386374] Bluetooth: BNEP socket layer initialized
  [    3.404958] Bluetooth: RFCOMM TTY layer initialized
  [    3.404977] Bluetooth: RFCOMM socket layer initialized
  [    3.404980] Bluetooth: RFCOMM ver 1.11
  [    3.405300] init: avahi-cups-reload main process (646) terminated with status 1
  [    3.414220] [drm] Initialized drm 1.1.0 20060810
  [    3.462834] type=1400 audit(1375674025.313:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=694 comm="apparmor_parser"
  [    3.463545] type=1400 audit(1375674025.313:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=694 comm="apparmor_parser"
  [    3.463931] type=1400 audit(1375674025.313:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=694 comm="apparmor_parser"
  [    3.490731] type=1400 audit(1375674025.341:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=706 comm="apparmor_parser"
  [    3.491541] type=1400 audit(1375674025.341:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=706 comm="apparmor_parser"
  [    3.491585] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20121018/utaddress-251)
  [    3.491597] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  [    3.512493] snd_hda_intel 0000:00:01.1: irq 54 for MSI/MSI-X
  [    3.546161] Linux video capture interface: v2.00
  [    3.551033] usbcore: registered new interface driver usbhid
  [    3.551037] usbhid: USB HID core driver
  [    3.553891] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
  [    3.554017] cfg80211: Calling CRDA to update world regulatory domain
  [    3.560864] [drm] radeon defaulting to kernel modesetting.
  [    3.560870] [drm] radeon kernel modesetting enabled.
  [    3.586127] acpi device:01: registered as cooling_device4
  [    3.586165] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  [    3.586262] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
  [    3.589667] VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
  [    3.613711] microcode: CPU0: patch_level=0x03000027
  [    3.617576] microcode: CPU1: patch_level=0x03000027
  [    3.617595] microcode: CPU2: patch_level=0x03000027
  [    3.617612] microcode: CPU3: patch_level=0x03000027
  [    3.618307] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
  [    3.620402] uvcvideo: Found UVC 1.00 device HP TrueVision HD (5986:02ac)
  [    3.637668] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
  [    3.637831] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
  [    3.639317] input: HP TrueVision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input8
  [    3.646819] usbcore: registered new interface driver uvcvideo
  [    3.646824] USB Video Class driver (1.1.1)
  [    3.649837] [drm] initializing kernel modesetting (SUMO 0x1002:0x9641 0x103C:0x1860).
  [    3.649906] [drm] register mmio base: 0xF0400000
  [    3.649908] [drm] register mmio size: 262144
  [    3.657002] ATOM BIOS: HP
  [    3.657049] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
  [    3.657054] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
  [    3.658830] [drm] Detected VRAM RAM=512M, BAR=256M
  [    3.658834] [drm] RAM width 32bits DDR
  [    3.660823] [TTM] Zone  kernel: Available graphics memory: 3819850 kiB
  [    3.660828] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
  [    3.660831] [TTM] Initializing pool allocator
  [    3.660839] [TTM] Initializing DMA pool allocator
  [    3.660874] [drm] radeon: 512M of VRAM memory ready
  [    3.660877] [drm] radeon: 512M of GTT memory ready.
  [    3.660902] [drm] GART: num cpu pages 131072, num gpu pages 131072
  [    3.662608] [drm] Loading SUMO Microcode
  [    3.684724] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
  [    3.686020] radeon 0000:00:01.0: WB enabled
  [    3.686026] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880201027c00
  [    3.686031] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880201027c0c
  [    3.686034] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  [    3.686036] [drm] Driver supports precise vblank timestamp query.
  [    3.686079] radeon 0000:00:01.0: irq 55 for MSI/MSI-X
  [    3.686096] radeon 0000:00:01.0: radeon: using MSI.
  [    3.686129] [drm] radeon: irq initialized.
  [    3.699385] kvm: Nested Virtualization enabled
  [    3.699392] kvm: Nested Paging enabled
  [    3.711357] [drm] ring test on 0 succeeded in 1 usecs
  [    3.711422] [drm] ring test on 3 succeeded in 1 usecs
  [    3.711894] [drm] ib test on ring 0 succeeded in 0 usecs
  [    3.711988] [drm] ib test on ring 3 succeeded in 0 usecs
  [    3.715568] acpi device:05: registered as cooling_device5
  [    3.715605] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
  [    3.715733] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input9
  [    3.721340] [drm] radeon atom DIG backlight initialized
  [    3.721346] [drm] Radeon Display Connectors
  [    3.721348] [drm] Connector 0:
  [    3.721351] [drm]   VGA-1
  [    3.721352] [drm]   HPD2
  [    3.721355] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
  [    3.721357] [drm]   Encoders:
  [    3.721358] [drm]     CRT1: INTERNAL_UNIPHY2
  [    3.721360] [drm]     CRT1: NUTMEG
  [    3.721362] [drm] Connector 1:
  [    3.721364] [drm]   LVDS-1
  [    3.721365] [drm]   HPD1
  [    3.721367] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
  [    3.721369] [drm]   Encoders:
  [    3.721370] [drm]     LCD1: INTERNAL_UNIPHY2
  [    3.721372] [drm]     LCD1: TRAVIS
  [    3.721373] [drm] Connector 2:
  [    3.721375] [drm]   HDMI-A-1
  [    3.721376] [drm]   HPD4
  [    3.721379] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
  [    3.721380] [drm]   Encoders:
  [    3.721382] [drm]     DFP1: INTERNAL_UNIPHY
  [    3.749152] [drm] Internal thermal controller without fan control
  [    3.749221] [drm] radeon: power management initialized
  [    3.768381] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  [    3.843962] init: failsafe main process (817) killed by TERM signal
  [    3.861747] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.0/input/input10
  [    3.864276] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:10.1-1/input0
  [    3.864649] input: USB Laser Wheel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input11
  [    3.865987] hid-generic 0003:1BCF:000C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [USB Laser Wheel Mouse] on usb-0000:00:12.0-2/input0
  [    3.885131] [drm] fb mappable at 0xD0142000
  [    3.885135] [drm] vram apper at 0xD0000000
  [    3.885137] [drm] size 4325376
  [    3.885139] [drm] fb depth is 24
  [    3.885141] [drm]    pitch is 5632
  [    3.889228] fbcon: radeondrmfb (fb0) is primary device
  [    3.897529] cfg80211: World regulatory domain updated:
  [    3.897530] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [    3.897534] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [    3.897536] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [    3.897537] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [    3.897539] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [    3.897540] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [    3.971251] type=1400 audit(1375674025.821:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=966 comm="apparmor_parser"
  [    3.971792] type=1400 audit(1375674025.821:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=966 comm="apparmor_parser"
  [    3.975139] type=1400 audit(1375674025.825:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=971 comm="apparmor_parser"
  [    3.976079] type=1400 audit(1375674025.825:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=967 comm="apparmor_parser"
  [    4.021453] Console: switching to colour frame buffer device 170x48
  [    4.027508] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
  [    4.027511] radeon 0000:00:01.0: registered panic notifier
  [    4.105902] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
  [    4.105998] radeon 0000:01:00.0: enabling device (0000 -> 0003)
  [    4.106367] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x103C:0x1860).
  [    4.106429] [drm] register mmio base: 0xF0300000
  [    4.106431] [drm] register mmio size: 131072
  [    4.106435] vga_switcheroo: enabled
  [    4.106598] ATPX version 1
  [    4.111533] r8169 0000:02:00.0 eth0: link down
  [    4.111592] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [    4.112631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [    4.165543] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  [    4.166125] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  [    4.565388] mmc1: error -110 whilst initialising SD card
  [    5.769925] ATOM BIOS: HP
  [    5.769990] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
  [    5.769992] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
  [    5.770650] [drm] Detected VRAM RAM=1024M, BAR=256M
  [    5.770656] [drm] RAM width 128bits DDR
  [    5.770689] [drm] radeon: 1024M of VRAM memory ready
  [    5.770691] [drm] radeon: 512M of GTT memory ready.
  [    5.770716] [drm] GART: num cpu pages 131072, num gpu pages 131072
  [    5.771574] [drm] probing gen 2 caps for device 1022:1707 = 1/0
  [    5.771650] [drm] Loading TURKS Microcode
  [    5.776411] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
  [    5.776559] radeon 0000:01:00.0: WB enabled
  [    5.776563] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801f9410c00
  [    5.776565] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801f9410c0c
  [    5.776568] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  [    5.776569] [drm] Driver supports precise vblank timestamp query.
  [    5.776619] radeon 0000:01:00.0: irq 56 for MSI/MSI-X
  [    5.776635] radeon 0000:01:00.0: radeon: using MSI.
  [    5.776689] [drm] radeon: irq initialized.
  [    5.793423] [drm] ring test on 0 succeeded in 2 usecs
  [    5.793492] [drm] ring test on 3 succeeded in 1 usecs
  [    5.793899] [drm] ib test on ring 0 succeeded in 0 usecs
  [    5.793975] [drm] ib test on ring 3 succeeded in 0 usecs
  [    5.794253] [drm] Radeon Display Connectors
  [    5.801397] [drm] Internal thermal controller with fan control
  [    5.802674] [drm] radeon: power management initialized
  [    5.802878] radeon 0000:01:00.0: No connectors reported connected with modes
  [    5.802881] [drm] Cannot find any crtc or sizes - going 1024x768
  [    5.805300] [drm] fb mappable at 0xE0142000
  [    5.805301] [drm] vram apper at 0xE0000000
  [    5.805302] [drm] size 3145728
  [    5.805303] [drm] fb depth is 24
  [    5.805304] [drm]    pitch is 4096
  [    5.805529] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
  [    5.807283] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 1
  [    5.845590] init: plymouth-splash main process (1299) terminated with status 1
  [    5.931711] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
  [    5.931718] vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=io+mem
  [    5.957005] mmc1: error -110 whilst initialising SD card
  [    6.952636] psmouse serio1: Failed to reset mouse on isa0060/serio1
  [   22.528653] psmouse serio1: Failed to deactivate mouse on isa0060/serio1
  [   22.928550] psmouse serio1: Failed to enable mouse on isa0060/serio1
  [   26.691742] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input12
  [   26.891547] psmouse serio1: Failed to enable mouse on isa0060/serio1
  [   33.714682] wlan0: authenticate with 5c:0e:8b:1e:7d:b1
  [   33.729961] wlan0: send auth to 5c:0e:8b:1e:7d:b1 (try 1/3)
  [   33.731426] wlan0: authenticated
  [   33.733872] wlan0: associate with 5c:0e:8b:1e:7d:b1 (try 1/3)
  [   33.737496] wlan0: RX AssocResp from 5c:0e:8b:1e:7d:b1 (capab=0x8411 status=0 aid=1)
  [   33.737561] wlan0: associated
  [   33.737596] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  [   33.737667] cfg80211: Calling CRDA for country: US
  [   33.742698] cfg80211: Regulatory domain changed to country: US
  [   33.742702] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [   33.742705] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  [   33.742707] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  [   33.742709] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   33.742710] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   33.742712] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   33.742713] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  [   34.783260] wlan0: deauthenticated from 5c:0e:8b:1e:7d:b1 (Reason: 15)
  [   34.793842] cfg80211: Calling CRDA to update world regulatory domain
  [   34.798834] cfg80211: World regulatory domain updated:
  [   34.798837] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [   34.798840] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   34.798842] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [   34.798844] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [   34.798845] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   34.798847] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   48.810728] wlan0: authenticate with 00:23:68:74:a0:91
  [   48.826235] wlan0: send auth to 00:23:68:74:a0:91 (try 1/3)
  [   48.827735] wlan0: authenticated
  [   48.830161] wlan0: associate with 00:23:68:74:a0:91 (try 1/3)
  [   48.834427] wlan0: RX AssocResp from 00:23:68:74:a0:91 (capab=0x8411 status=0 aid=1)
  [   48.834489] wlan0: associated
  [   48.834559] cfg80211: Calling CRDA for country: US
  [   48.839507] cfg80211: Regulatory domain changed to country: US
  [   48.839511] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [   48.839514] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  [   48.839516] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  [   48.839518] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   48.839519] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   48.839521] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   48.839522] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  [  123.417674] init: udevtrigger post-stop process (501) terminated with status 1
  [  167.027665] wlan0: authenticate with 00:23:68:78:13:01
  [  167.035833] wlan0: send auth to 00:23:68:78:13:01 (try 1/3)
  [  167.035934] cfg80211: Calling CRDA to update world regulatory domain
  [  167.037372] wlan0: authenticated
  [  167.043562] wlan0: associate with 00:23:68:78:13:01 (try 1/3)
  [  167.047458] wlan0: RX AssocResp from 00:23:68:78:13:01 (capab=0x8411 status=0 aid=1)
  [  167.047612] wlan0: associated
  [  167.048787] cfg80211: World regulatory domain updated:
  [  167.048794] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [  167.048801] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  167.048807] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [  167.048812] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [  167.048817] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  167.048822] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  167.049016] cfg80211: Calling CRDA for country: US
  [  167.058593] cfg80211: Regulatory domain changed to country: US
  [  167.058602] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [  167.058609] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  [  167.058615] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  [  167.058620] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  167.058625] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  167.058629] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  167.058634] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  [  184.851462] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC__.EGRW] (Node ffff880203e6b410), AE_AML_INFINITE_LOOP (20121018/psparse-537)
  [  184.851492] ACPI Error: Method parse/execution failed [\_SB_.ACEL.ALRD] (Node ffff880203e6eed8), AE_AML_INFINITE_LOOP (20121018/psparse-537)
  [  184.851517] lis3lv02d: unknown sensor type 0x0
  [  184.851536] hp_accel: probe of HPQ0004:00 failed with error -22
  [  184.852153] wmi: Mapper loaded
  [  184.869677] input: HP WMI hotkeys as /devices/virtual/input/input13
  [  713.347587] wlan0: authenticate with 00:23:68:74:a0:91
  [  713.355614] wlan0: send auth to 00:23:68:74:a0:91 (try 1/3)
  [  713.355721] cfg80211: Calling CRDA to update world regulatory domain
  [  713.357159] wlan0: authenticated
  [  713.359425] wlan0: associate with 00:23:68:74:a0:91 (try 1/3)
  [  713.365278] wlan0: RX AssocResp from 00:23:68:74:a0:91 (capab=0x8411 status=0 aid=1)
  [  713.365339] wlan0: associated
  [  713.365543] cfg80211: World regulatory domain updated:
  [  713.365547] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [  713.365549] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  713.365552] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [  713.365554] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [  713.365555] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  713.365557] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  713.365567] cfg80211: Calling CRDA for country: US
  [  713.374052] cfg80211: Regulatory domain changed to country: US
  [  713.374061] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [  713.374069] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  [  713.374075] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  [  713.374080] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  713.374085] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  713.374089] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [  713.374094] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  [ 2872.801298] wlan0: authenticate with 00:23:68:78:13:01
  [ 2872.809432] wlan0: send auth to 00:23:68:78:13:01 (try 1/3)
  [ 2872.809531] cfg80211: Calling CRDA to update world regulatory domain
  [ 2872.811516] wlan0: authenticated
  [ 2872.813225] wlan0: associate with 00:23:68:78:13:01 (try 1/3)
  [ 2872.816050] cfg80211: World regulatory domain updated:
  [ 2872.816056] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [ 2872.816059] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 2872.816063] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [ 2872.816066] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [ 2872.816068] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 2872.816070] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 2872.816997] wlan0: RX AssocResp from 00:23:68:78:13:01 (capab=0x8411 status=0 aid=1)
  [ 2872.817096] wlan0: associated
  [ 2872.817213] cfg80211: Calling CRDA for country: US
  [ 2872.824714] cfg80211: Regulatory domain changed to country: US
  [ 2872.824719] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [ 2872.824723] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  [ 2872.824727] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  [ 2872.824729] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 2872.824732] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 2872.824734] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 2872.824736] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  [ 4911.643214] show_signal_msg: 54 callbacks suppressed
  [ 4911.643228] pool[6161]: segfault at 0 ip 00007fb1da4e2ed7 sp 00007fb1d520b808 error 6 in libdbus-1.so.3.7.2[7fb1da4bc000+43000]
  [ 6046.633384] wlan0: deauthenticating from 00:23:68:78:13:01 by local choice (reason=3)
  [ 6046.679581] cfg80211: Calling CRDA to update world regulatory domain
  [ 6046.692551] cfg80211: World regulatory domain updated:
  [ 6046.692560] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [ 6046.692568] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 6046.692574] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [ 6046.692580] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [ 6046.692584] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 6046.692589] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 6047.816171] wlan0: authenticate with 00:23:68:78:13:01
  [ 6047.830829] wlan0: send auth to 00:23:68:78:13:01 (try 1/3)
  [ 6047.832335] wlan0: authenticated
  [ 6047.834577] wlan0: associate with 00:23:68:78:13:01 (try 1/3)
  [ 6047.838103] wlan0: RX AssocResp from 00:23:68:78:13:01 (capab=0x8411 status=0 aid=1)
  [ 6047.838183] wlan0: associated
  [ 6047.838297] cfg80211: Calling CRDA for country: US
  [ 6047.848947] cfg80211: Regulatory domain changed to country: US
  [ 6047.848956] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [ 6047.848964] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  [ 6047.848971] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  [ 6047.848976] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 6047.848981] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 6047.848985] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [ 6047.848990] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  [24517.813974] systemd-hostnamed[14840]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

  --- 
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC1:  sam        2054 F.... pulseaudio
   /dev/snd/controlC0:  sam        2054 F.... pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e8d5bde4-eaab-4cca-99a6-cad457081433
  InstallationDate: Installed on 2013-08-04 (3 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  MachineType: Hewlett-Packard HP Pavilion dv6 Notebook PC
  MarkForUpload: True
  NonfreeKernelModules: fglrx
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-27-generic root=UUID=800d12f1-9f8d-4446-aaba-631780bccfa1 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware                            1.106
  RfKill:
   0: phy0: Wireless LAN
   	Soft blocked: no
   	Hard blocked: no
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 01/25/2013
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.1C
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 1807
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 33.58
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: dmi:bvnHewlett-Packard:bvrF.1C:bd01/25/2013:svnHewlett-Packard:pnHPPaviliondv6NotebookPC:pvr0690210000204710000620100:rvnHewlett-Packard:rn1807:rvr33.58:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion dv6 Notebook PC
  dmi.product.version: 0690210000204710000620100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1209047/+subscriptions