kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #140139
[Bug 1506327] [NEW] ISST-KVM: R3-0: Tuleta: PowerKVM : flyg3 : Boot during installation hangs at "Booting Linux via __start()"
You have been subscribed to a public bug:
== Comment: #0 ==
---Problem Description---
The installation of ubuntu1510 is hanging at the below given point:
PowerKVM host info:
[root@flykvm ~]# uname -a
Linux flykvm 3.18.21-352.el7_1.pkvm3_1_0.3400.1.ppc64le #1 SMP Tue Sep 29 13:30:10 CDT 2015 ppc64le ppc64le ppc64le GNU/Linux
[root@flykvm ~]#
[root@flykvm ~]#
[root@flykvm ~]# cat /etc/os-release
NAME="IBM_PowerKVM"
VERSION="3.1.0"
ID=ibm_powerkvm
VERSION_ID="3.1.0"
BUILD_ID="35-beta"
PRETTY_NAME="IBM_PowerKVM 3.1.0"
ANSI_COLOR="0;34"
CPE_NAME="cpe:/o:ibm:beta:pkvm3_1"
[root@flykvm ~]#
---console logs---
[root@flykvm ~]# virsh start --console flyg3
Domain flyg3 started
Connected to domain flyg3
Escape character is ^]
SLOF **********************************************************************
QEMU Starting
Build Date = Sep 21 2015 16:58:03
FW Version = mockbuild@ release 20150921
Press "s" to enter Open Firmware.
Populating /vdevice methods
Populating /vdevice/v-scsi@2000
SCSI: Looking for devices
8002000000000000 CD-ROM : "QEMU QEMU CD-ROM 2.3."
8001000000000000 DISK : "QEMU QEMU HARDDISK 2.3."
8000000000000000 DISK : "QEMU QEMU HARDDISK 2.3."
Populating /vdevice/vty@30001000
Populating /vdevice/nvram@71000000
00 2000 (D) : 106b 003f serial bus [ usb-ohci ]
00 1000 (D) : 1af4 1000 virtio [ net ]
00 0800 (D) : 15b3 1011 network [ network ]
No NVRAM common partition, re-initializing...
Scanning USB
OHCI: initializing
Using default console: /vdevice/vty@30001000
Welcome to Open Firmware
Copyright (c) 2004, 2011 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Trying to load: from: /vdevice/v-scsi@2000/disk@8000000000000000 ...
E3404: Not a bootable device!
Trying to load: from: /vdevice/v-scsi@2000/disk@8002000000000000 ... Successfully loaded
GNU GRUB version 2.02~beta2-28
+----------------------------------------------------------------------------+
|*Install |
| Rescue mode |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
OF stdout device is: /vdevice/vty@30001000
Preparing to boot Linux version 4.2.0-14-generic (buildd@denneed03) (gcc version 5.2.1 20150930 (Ubuntu 5.2.1-19ubuntu1) ) #16-Ubuntu SMP Fri Oct 2 05:18:10 UTC 2015 (Ubuntu 4.2.0-14.16-generic 4.2.2)
Detected machine type: 0000000000000101
Max number of cores passed to firmware: 256 (NR_CPUS = 2048)
Calling ibm,client-architecture-support... done
command line: BOOT_IMAGE=/install/vmlinux tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=false --- quiet
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 00000000043b0000
alloc_top : 0000000030000000
alloc_top_hi : 0000000100000000
rmo_top : 0000000030000000
ram_top : 0000000100000000
instantiating rtas at 0x000000002fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x00000000043c0000 -> 0x00000000043c0b7d
Device tree struct 0x00000000043d0000 -> 0x00000000043e0000
Quiescing Open Firmware ...
Booting Linux via __start() ... <<<<---------------HUNG
[root@flykvm ~]# virsh dumpxml flyg3
<domain type='kvm' id='39'>
<name>flyg3</name>
<uuid>5f7bd054-6e7b-45e4-b0dc-9e8234ae13ac</uuid>
<maxMemory slots='32' unit='KiB'>99090432</maxMemory>
<memory unit='KiB'>6291456</memory>
<currentMemory unit='KiB'>6291456</currentMemory>
<memtune>
<hard_limit unit='KiB'>100139008</hard_limit>
</memtune>
<vcpu placement='static'>32</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='ppc64' machine='pseries-2.4'>hvm</type>
<boot dev='hd'/>
<boot dev='cdrom'/>
</os>
<cpu>
<topology sockets='2' cores='2' threads='8'/>
<numa>
<cell id='0' cpus='0-31' memory='6291456' unit='KiB'/>
</numa>
</cpu>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-ppc64</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' cache='none'/>
<source file='/houston_ext4/flyg3_root.img'/>
<backingStore/>
<target dev='sda' bus='scsi'/>
<alias name='scsi0-0-0-0'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' cache='none'/>
<source file='/houston_xfs/flyg3_io.img'/>
<backingStore/>
<target dev='sdb' bus='scsi'/>
<alias name='scsi0-0-0-1'/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/ubuntu1510/wily-server-ppc64el.iso'/>
<backingStore/>
<target dev='sdc' bus='scsi'/>
<readonly/>
<alias name='scsi0-0-0-2'/>
<address type='drive' controller='0' bus='0' target='0' unit='2'/>
</disk>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='scsi' index='0'>
<alias name='scsi0'/>
<address type='spapr-vio' reg='0x2000'/>
</controller>
<controller type='usb' index='0'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</controller>
<interface type='direct'>
<mac address='52:54:00:eb:cb:5f'/>
<source dev='enP7p1s0' mode='bridge'/>
<target dev='macvtap4'/>
<model type='virtio-net'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/0'/>
<target type='isa-serial' port='0'/>
<alias name='serial0'/>
<address type='spapr-vio' reg='0x30001000'/>
</serial>
<console type='pty' tty='/dev/pts/0'>
<source path='/dev/pts/0'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
<address type='spapr-vio' reg='0x30001000'/>
</console>
<hostdev mode='subsystem' type='pci' managed='yes'>
<driver name='vfio'/>
<source>
<address domain='0x0004' bus='0x01' slot='0x00' function='0x0'/>
</source>
<alias name='hostdev0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
</hostdev>
<memballoon model='none'>
<alias name='balloon0'/>
</memballoon>
</devices>
<seclabel type='none' model='selinux'/>
</domain>
[root@flykvm ~]# qemu-img info /houston_ext4/flyg3_root.img
image: /houston_ext4/flyg3_root.img
file format: qcow2
virtual size: 20G (21474836480 bytes)
disk size: 196K
cluster_size: 65536
Format specific information:
compat: 1.1
lazy refcounts: false
refcount bits: 16
corrupt: false
[root@flykvm ~]# qemu-img info /houston_xfs/flyg3_io.img
image: /houston_xfs/flyg3_io.img
file format: qcow2
virtual size: 8.0G (8589934592 bytes)
disk size: 2.4G
cluster_size: 65536
Format specific information:
compat: 1.1
lazy refcounts: false
refcount bits: 16
corrupt: false
---- qemu logs for flyg3 -------------- :
[root@flykvm ~]# cat /var/log/libvirt/qemu/flyg3.log
2015-10-13 06:32:02.069+0000: starting up libvirt version: 1.2.16, package: 1.el7_1.pkvm3_1_0.3400.1 (Koji, 2015-09-29-13:50:24, bldple1), qemu version: 2.3.0
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin QEMU_AUDIO_DRV=none /usr/bin/qemu-system-ppc64 -name flyg3 -S -machine pseries-2.4,accel=kvm,usb=off -m size=6291456k,slots=32,maxmem=99090432k -realtime mlock=off -smp 32,sockets=2,cores=2,threads=8 -numa node,nodeid=0,cpus=0-31,mem=6144 -uuid 5f7bd054-6e7b-45e4-b0dc-9e8234ae13ac -nographic -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/flyg3.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -boot strict=on -device pci-ohci,id=usb,bus=pci.0,addr=0x4 -device spapr-vscsi,id=scsi0,reg=0x2000 -drive file=/houston_ext4/flyg3_root.img,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1 -drive file=/houston_xfs/flyg3_io.img,if=none,id=drive-scsi0-0-0-1,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=1,drive=drive-scsi0-0-0-1,id=scsi0-0-0-1 -drive file=/var/lib/libvirt/images/ubuntu1510/wily-server-ppc64el.iso,if=none,id=drive-scsi0-0-0-2,readonly=on,format=raw -device scsi-cd,bus=scsi0.0,channel=0,scsi-id=0,lun=2,drive=drive-scsi0-0-0-2,id=scsi0-0-0-2,bootindex=2 -netdev tap,fd=28,id=hostnet0 -device virtio-net,netdev=hostnet0,id=net0,mac=52:54:00:eb:cb:5f,bus=pci.0,addr=0x2 -chardev pty,id=charserial0 -device spapr-vty,chardev=charserial0,reg=0x30001000 -device vfio-pci,host=0004:01:00.0,id=hostdev0,bus=pci.0,addr=0x1 -msg timestamp=on
char device redirected to /dev/pts/6 (label charserial0)
[root@flykvm ~]#
== Comment: #2 ==
Can you please try adding graphics support and test if it installation
pass with VNC.
example:
------
<graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1'/>
</graphics>
<video>
<model type='vga' vram='16384' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</video>
------
== Comment: #3 ==
I added graphics support and tested in VNC. The system flyg3 hangs at
the same point - "Booting Linux via __start()"
** Affects: linux (Ubuntu)
Importance: Undecided
Assignee: Taco Screen team (taco-screen-team)
Status: New
** Tags: architecture-ppc64le bot-comment bugnameltc-131655 severity-critical targetmilestone-inin---
--
ISST-KVM: R3-0: Tuleta: PowerKVM : flyg3 : Boot during installation hangs at "Booting Linux via __start()"
https://bugs.launchpad.net/bugs/1506327
You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu.
