kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #142205
[Bug 1082215] Re: (at least) USB id 14cd:6116 SATA Bridge M6116 chip causes HDD corruption
Re comment #36: What is written in the previous comments is a
troubleshooting (diagnostic) process, not a user support forum.
Troubleshooting is often necessary for bug reports. The suggestions in
comment #36 would be problematic to implement, however there is
probably an opportunity to make more use of Launchpad's Ubuntu version
targeting feature.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1082215
Title:
(at least) USB id 14cd:6116 SATA Bridge M6116 chip causes HDD
corruption
Status in linux package in Ubuntu:
Fix Released
Bug description:
Description:
I bought an external USB enclosure for a SATA 2.5" hard drive. When using this USB drive with Microsoft Windows, it works perfectly - I have no problems reading and writing from/to the drive.
However when using this USB drive in Ubuntu (10.04 as well as 12.04) I can read the data on the drive without a problem, however after I wrote to the drive I started getting corruption errors.
To simplify the detection of the problem I used a new empty hard drive with this USB enclosure.
I wrote zeroes on about 1GB of the start of the drive (using a different USB to SATA interface).
When I read from the drive using the commands
dd if=/dev/sdb of=/tmp/xxx bs=1M count=100
hexdump -C xxx
The output of hexdump indicates that all that was read were zeroes:
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
06400000
However, after I run the following command (writes to drive):
dd if=/dev/zero of=/dev/sdb bs=1M count=100
and then these commands:
dd if=/dev/sdb of=/tmp/xxx bs=1M count=100
hexdump -C xxx | less
I get the following output:
00000000 55 53 42 43 96 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
00000010 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 18 |................|
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
0001e000 55 53 42 43 97 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
0001e010 00 00 00 00 f0 00 00 f0 00 00 00 00 00 00 00 e5 |................|
0001e020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
0003c000 55 53 42 43 98 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
0003c010 00 00 00 01 e0 00 00 f0 00 00 00 00 00 00 00 4c |...............L|
0003c020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
0005a000 55 53 42 43 99 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
0005a010 00 00 00 02 d0 00 00 f0 00 00 00 00 00 00 00 49 |...............I|
0005a020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00078000 55 53 42 43 9a 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
00078010 00 00 00 03 c0 00 00 f0 00 00 00 00 00 00 00 e1 |................|
00078020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00096000 55 53 42 43 9b 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
00096010 00 00 00 04 b0 00 00 f0 00 00 00 00 00 00 00 40 |...............@|
00096020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000b4000 55 53 42 43 9c 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
000b4010 00 00 00 05 a0 00 00 f0 00 00 00 00 00 00 00 16 |................|
000b4020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000d2000 55 53 42 43 9d 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
000d2010 00 00 00 06 90 00 00 f0 00 00 00 00 00 00 00 13 |................|
000d2020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000f0000 55 53 42 43 9e 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
000f0010 00 00 00 07 80 00 00 f0 00 00 00 00 00 00 00 bb |................|
000f0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
0010e000 55 53 42 43 9f 5f 00 00 00 e0 01 00 00 00 0a 2a |USBC._.........*|
0010e010 00 00 00 08 70 00 00 f0 00 00 00 00 00 00 00 52 |....p..........R|
0010e020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
This indicates that although I tried to write zeroes to the drive,
what was actually written was mostly zeroes, but also these strange
blocks starting with "USBC". According to the dump these show up at
the beginning of every block (block size was 1M bytes) that the 'dd'
program wrote.
The output of lsusb on this system is:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 044e:3001 Alps Electric Co., Ltd UGTZ4 Bluetooth
Bus 002 Device 002: ID 14cd:6116 Super Top M6116 SATA Bridge
The last entry being the USB to SATA controller that I think Ubuntu
has a problem with.
Thanks,
Tal Nevo
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-33-generic 3.2.0-33.52
ProcVersionSignature: Ubuntu 3.2.0-33.52-generic 3.2.31
Uname: Linux 3.2.0-33-generic x86_64
NonfreeKernelModules: vtsspp sep3_8 pax apwr3_0
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu15
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: tal 2136 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xf6a20000 irq 47'
Mixer name : 'Intel Cantiga HDMI'
Components : 'HDA:11d41883,10f70000,00100400 HDA:14f12c06,10f70000,00100000 HDA:80862802,80860101,00100000'
Controls : 40
Simple ctrls : 21
Date: Fri Nov 23 02:26:55 2012
HibernationDevice: RESUME=UUID=7d81d0b8-58ad-4582-9006-43f1e0ed2898
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120817.1)
MachineType: Panasonic Corporation CF-F8GXWAJP
MarkForUpload: True
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcEnviron:
TERM=xterm
SHELL=/bin/bash
PATH=(custom, no user)
LANG=en_US.UTF-8
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-33-generic root=UUID=172a77d7-5669-4e0a-bfe2-256eb4864c4d ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-3.2.0-33-generic N/A
linux-backports-modules-3.2.0-33-generic N/A
linux-firmware 1.79.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 06/05/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: V3.00L14
dmi.board.name: CFF8-3
dmi.board.vendor: Panasonic Corporation
dmi.board.version: 1
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: Panasonic Corporation
dmi.chassis.version: 001
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV3.00L14:bd06/05/2009:svnPanasonicCorporation:pnCF-F8GXWAJP:pvr003:rvnPanasonicCorporation:rnCFF8-3:rvr1:cvnPanasonicCorporation:ct10:cvr001:
dmi.product.name: CF-F8GXWAJP
dmi.product.version: 003
dmi.sys.vendor: Panasonic Corporation
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1082215/+subscriptions
