← Back to team overview

kernel-packages team mailing list archive

[Bug 1512149] [NEW] package linux-image-4.2.0-16-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1

 

Public bug reported:

No idea. When I run ubuntu-bug linux, I get the error:
The problem cannot be reported:
This is not an official Ubuntu package. Please remove any third party package and try again.

Since that gives no clue as to what package it's talking about, it could be a Microsoft error message. All I did was let Update Manger upgrade Ubuntu to 15.10 at its own suggestion, unsuccessfully, apparently. During the process, I got dependency problem errors on kernel packages. It took a while, but the machine did reboot. Now I have:
$ uname -a
Linux Inspiron600m 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:01 UTC 2015 i686 i686 i686 GNU/Linux
(which I believe is what I had before the upgrade started). So I did this:
$ sudo apt-get check
Reading package lists... Done
Building dependency tree       
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
 linux-image-extra-4.2.0-16-generic : Depends: linux-image-4.2.0-16-generic but it is not installed
 linux-image-generic : Depends: linux-image-4.2.0-16-generic but it is not installed
E: Unmet dependencies. Try using -f.

$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
  g++-4.9 gir1.2-vte-2.90 gstreamer0.10-gconf libapt-inst1.5 libavcodec56
  libavformat56 libavresample2 libavutil54 libboost-filesystem1.55.0
  libboost-iostreams1.55.0 libboost-system1.54.0 libboost-system1.55.0
  libboost-thread1.54.0 libcamel-1.2-49 libclass-load-perl libdvbpsi9
  libebackend-1.2-7 libebook-1.2-14 libebook-contacts-1.2-0 libecal-1.2-16
  libedata-book-1.2-20 libedata-cal-1.2-23 libedataserver-1.2-18 libept1.4.12
  libexiv2-13 libfarstream-0.1-0 libgdata19 libgegl-0.2-0 libgnome-bluetooth11
  libgphoto2-port10 libgsoap5 libhogweed2 libinput7 libjson0
  libkf5kcmutils-data libkf5kcmutils5 libkomparediff2-4 libkonq-common
  libkonq5-templates libkonq5abi1 liblist-allutils-perl libmirclient8
  libmircommon3 libmirprotobuf0 libnettle4 libplist2 libpoppler49
  libpostproc52 libprotobuf9 libreadline5 libregexp-common-perl
  libstdc++-4.9-dev libswscale3 libvncclient0 libvncserver0 libvpx1
  libx264-142 libxcb-util0 mir-client-platform-mesa2 python-commandnotfound
  python3-crypto upstart-bin
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
  linux-image-4.2.0-16-generic
Suggested packages:
  fdutils linux-doc-4.2.0 linux-source-4.2.0 linux-tools
The following NEW packages will be installed:
  linux-image-4.2.0-16-generic
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
3 not fully installed or removed.
Need to get 0 B/16.9 MB of archives.
After this operation, 38.8 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
(Reading database ... 292072 files and directories currently installed.)
Preparing to unpack .../linux-image-4.2.0-16-generic_4.2.0-16.19_i386.deb ...
This kernel does not support a non-PAE CPU.
dpkg: error processing archive /var/cache/apt/archives/linux-image-4.2.0-16-generic_4.2.0-16.19_i386.deb (--unpack):
 subprocess new pre-installation script returned error exit status 1
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-16-generic /boot/vmlinuz-4.2.0-16-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-16-generic /boot/vmlinuz-4.2.0-16-generic
Errors were encountered while processing:
 /var/cache/apt/archives/linux-image-4.2.0-16-generic_4.2.0-16.19_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

That (finally) tells me the real problem is that Update Manager tried to
install an upgrade that doesn't "support a non-PAE CPU". Strictly
speaking, as I understand it, the Centrino on this machine has the PAE
capability but not the ability to tell the OS the ability is there, as I
had to start with a "non-PAE" Ubuntu installer and everything through
15.04 seems to have worked just fine.

I guess since the machine still works, I can purge the kernel packages that won't work and see what problems I have to deal with in the future. It is unfortunate that we allow industry to force us to buy new computers when 99.99% of all computers currently used privately and in business as computers (as opposed to gaming machines) are so underutilized that buying a new one is 99.99% waste. Let's see:
$ cat /proc/version_signature
Ubuntu 3.19.0-15.15-generic 3.19.3
$ sudo lspci -vnvn > lspci-vnvn.log
pcilib: sysfs_read_vpd: read failed: Connection timed out
...but there's plenty in the log:
$ sudo lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
	Subsystem: Dell Device [1028:011e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Capabilities: [e4] Vendor Specific Information: Len=04 <?>
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
	Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fc000000-fdffffff
	Prefetchable memory behind bridge: e8000000-efffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:011e]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at bf80 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:011e]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at bf40 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:011e]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at bf20 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:011e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 11
	Region 0: Memory at f4fffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=0080
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=0a, sec-latency=32
	I/O behind bridge: 0000d000-0000efff
	Memory behind bridge: f6000000-fbffffff
	Prefetchable memory behind bridge: 80000000-87ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel driver in use: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: Dell Device [1028:011e]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at bfa0 [size=16]
	Region 5: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: ata_piix

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
	Subsystem: Dell Device [1028:011e]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 5
	Region 0: I/O ports at b800 [size=256]
	Region 1: I/O ports at bc40 [size=64]
	Region 2: Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: snd_intel8x0

00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
	Subsystem: Broadcom Corporation Device [14e4:4d64]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 5
	Region 0: I/O ports at b400 [size=256]
	Region 1: I/O ports at b080 [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:011e]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at c000 [size=256]
	Region 2: Memory at fcff0000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at fc000000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: radeon

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet [14e4:165d] (rev 01)
	Subsystem: Dell Latitude D400 [1028:865d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (16000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at faff0000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
		Not readable
	Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
		Address: 7fefc7fdffffa76c  Data: dfdf
	Kernel driver in use: tg3

02:01.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller [1217:7113] (rev 20)
	Subsystem: Dell Device [1028:011e]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: 80000000-83ffffff (prefetchable)
	Memory window 1: 8c000000-8fffffff
	I/O window 0: 0000d000-0000d0ff
	I/O window 1: 0000d400-0000d4ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
		Bridge: PM- B3+
	Kernel driver in use: yenta_cardbus

02:01.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller [1217:7113] (rev 20)
	Subsystem: Dell Device [1028:011e]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: 84000000-87ffffff (prefetchable)
	Memory window 1: 94000000-97ffffff
	I/O window 0: 0000d800-0000d8ff
	I/O window 1: 0000dc00-0000dcff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
		Bridge: PM- B3+
	Kernel driver in use: yenta_cardbus

02:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
	Subsystem: Intel Corporation Dell B130 laptop integrated WLAN [8086:2721]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at fafef000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Kernel driver in use: ipw2200

So, since Ubuntu is not intended to work on a "non-PAE CPU", the bug
isn't that it doesn't work, but that Update Manager tried to install
it...

ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: linux-image-4.2.0-16-generic (not installed)
ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
Uname: Linux 3.19.0-15-generic i686
ApportVersion: 2.19.1-0ubuntu4
Architecture: i386
AudioDevicesInUse:
 USER        PID ACCESS COMMAND
 /dev/snd/controlC0:  kent       1792 F.... pulseaudio
Date: Sun Nov  1 12:52:32 2015
DuplicateSignature: package:linux-image-4.2.0-16-generic:(not installed):subprocess new pre-installation script returned error exit status 1
ErrorMessage: subprocess new pre-installation script returned error exit status 1
HibernationDevice: RESUME=UUID=0dc01c56-1599-4a76-8717-22f4d37942f7
InstallationDate: Installed on 2014-04-22 (558 days ago)
InstallationMedia: Xubuntu 10.04 "Lucid Lynx" - Release i386 (20100429)
Lsusb:
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 002 Device 002: ID 1241:1166 Belkin MI-2150 Trust Mouse
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: Dell Computer Corporation Inspiron 600m
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-15-generic root=UUID=b2762d0a-9345-41cf-a5cf-e98bb3b6d350 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: grub-pc 2.02~beta2-29
RfKill:
 0: phy0: Wireless LAN
 	Soft blocked: no
 	Hard blocked: no
SourcePackage: linux
Title: package linux-image-4.2.0-16-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1
UpgradeStatus: Upgraded to wily on 2015-11-01 (0 days ago)
dmi.bios.date: 06/29/2005
dmi.bios.vendor: Dell Computer Corporation
dmi.bios.version: A17
dmi.board.vendor: Dell Computer Corporation
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Computer Corporation
dmi.modalias: dmi:bvnDellComputerCorporation:bvrA17:bd06/29/2005:svnDellComputerCorporation:pnInspiron600m:pvr:rvnDellComputerCorporation:rn:rvr:cvnDellComputerCorporation:ct8:cvr:
dmi.product.name: Inspiron 600m
dmi.sys.vendor: Dell Computer Corporation

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: apport-package i386 need-duplicate-check wily

** Attachment added: "lspci-vnvn.log"
   https://bugs.launchpad.net/bugs/1512149/+attachment/4510639/+files/lspci-vnvn.log

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1512149

Title:
  package linux-image-4.2.0-16-generic (not installed) failed to
  install/upgrade: subprocess new pre-installation script returned error
  exit status 1

Status in linux package in Ubuntu:
  New

Bug description:
  No idea. When I run ubuntu-bug linux, I get the error:
  The problem cannot be reported:
  This is not an official Ubuntu package. Please remove any third party package and try again.

  Since that gives no clue as to what package it's talking about, it could be a Microsoft error message. All I did was let Update Manger upgrade Ubuntu to 15.10 at its own suggestion, unsuccessfully, apparently. During the process, I got dependency problem errors on kernel packages. It took a while, but the machine did reboot. Now I have:
  $ uname -a
  Linux Inspiron600m 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:01 UTC 2015 i686 i686 i686 GNU/Linux
  (which I believe is what I had before the upgrade started). So I did this:
  $ sudo apt-get check
  Reading package lists... Done
  Building dependency tree       
  Reading state information... Done
  You might want to run 'apt-get -f install' to correct these.
  The following packages have unmet dependencies:
   linux-image-extra-4.2.0-16-generic : Depends: linux-image-4.2.0-16-generic but it is not installed
   linux-image-generic : Depends: linux-image-4.2.0-16-generic but it is not installed
  E: Unmet dependencies. Try using -f.

  $ sudo apt-get -f install
  Reading package lists... Done
  Building dependency tree       
  Reading state information... Done
  Correcting dependencies... Done
  The following packages were automatically installed and are no longer required:
    g++-4.9 gir1.2-vte-2.90 gstreamer0.10-gconf libapt-inst1.5 libavcodec56
    libavformat56 libavresample2 libavutil54 libboost-filesystem1.55.0
    libboost-iostreams1.55.0 libboost-system1.54.0 libboost-system1.55.0
    libboost-thread1.54.0 libcamel-1.2-49 libclass-load-perl libdvbpsi9
    libebackend-1.2-7 libebook-1.2-14 libebook-contacts-1.2-0 libecal-1.2-16
    libedata-book-1.2-20 libedata-cal-1.2-23 libedataserver-1.2-18 libept1.4.12
    libexiv2-13 libfarstream-0.1-0 libgdata19 libgegl-0.2-0 libgnome-bluetooth11
    libgphoto2-port10 libgsoap5 libhogweed2 libinput7 libjson0
    libkf5kcmutils-data libkf5kcmutils5 libkomparediff2-4 libkonq-common
    libkonq5-templates libkonq5abi1 liblist-allutils-perl libmirclient8
    libmircommon3 libmirprotobuf0 libnettle4 libplist2 libpoppler49
    libpostproc52 libprotobuf9 libreadline5 libregexp-common-perl
    libstdc++-4.9-dev libswscale3 libvncclient0 libvncserver0 libvpx1
    libx264-142 libxcb-util0 mir-client-platform-mesa2 python-commandnotfound
    python3-crypto upstart-bin
  Use 'apt-get autoremove' to remove them.
  The following extra packages will be installed:
    linux-image-4.2.0-16-generic
  Suggested packages:
    fdutils linux-doc-4.2.0 linux-source-4.2.0 linux-tools
  The following NEW packages will be installed:
    linux-image-4.2.0-16-generic
  0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
  3 not fully installed or removed.
  Need to get 0 B/16.9 MB of archives.
  After this operation, 38.8 MB of additional disk space will be used.
  Do you want to continue? [Y/n] Y
  (Reading database ... 292072 files and directories currently installed.)
  Preparing to unpack .../linux-image-4.2.0-16-generic_4.2.0-16.19_i386.deb ...
  This kernel does not support a non-PAE CPU.
  dpkg: error processing archive /var/cache/apt/archives/linux-image-4.2.0-16-generic_4.2.0-16.19_i386.deb (--unpack):
   subprocess new pre-installation script returned error exit status 1
  Examining /etc/kernel/postrm.d .
  run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-16-generic /boot/vmlinuz-4.2.0-16-generic
  run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-16-generic /boot/vmlinuz-4.2.0-16-generic
  Errors were encountered while processing:
   /var/cache/apt/archives/linux-image-4.2.0-16-generic_4.2.0-16.19_i386.deb
  E: Sub-process /usr/bin/dpkg returned an error code (1)

  That (finally) tells me the real problem is that Update Manager tried
  to install an upgrade that doesn't "support a non-PAE CPU". Strictly
  speaking, as I understand it, the Centrino on this machine has the PAE
  capability but not the ability to tell the OS the ability is there, as
  I had to start with a "non-PAE" Ubuntu installer and everything
  through 15.04 seems to have worked just fine.

  I guess since the machine still works, I can purge the kernel packages that won't work and see what problems I have to deal with in the future. It is unfortunate that we allow industry to force us to buy new computers when 99.99% of all computers currently used privately and in business as computers (as opposed to gaming machines) are so underutilized that buying a new one is 99.99% waste. Let's see:
  $ cat /proc/version_signature
  Ubuntu 3.19.0-15.15-generic 3.19.3
  $ sudo lspci -vnvn > lspci-vnvn.log
  pcilib: sysfs_read_vpd: read failed: Connection timed out
  ...but there's plenty in the log:
  $ sudo lspci -vnvn
  00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
  	Latency: 0
  	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
  	Capabilities: [e4] Vendor Specific Information: Len=04 <?>
  	Capabilities: [a0] AGP version 2.0
  		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
  		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
  	Kernel driver in use: agpgart-intel

  00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32
  	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
  	I/O behind bridge: 0000c000-0000cfff
  	Memory behind bridge: fc000000-fdffffff
  	Prefetchable memory behind bridge: e8000000-efffffff
  	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

  00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 11
  	Region 4: I/O ports at bf80 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 11
  	Region 4: I/O ports at bf40 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin C routed to IRQ 11
  	Region 4: I/O ports at bf20 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin D routed to IRQ 11
  	Region 0: Memory at f4fffc00 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [58] Debug port: BAR=1 offset=0080
  	Kernel driver in use: ehci-pci

  00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
  	Latency: 0
  	Bus: primary=00, secondary=02, subordinate=0a, sec-latency=32
  	I/O behind bridge: 0000d000-0000efff
  	Memory behind bridge: f6000000-fbffffff
  	Prefetchable memory behind bridge: 80000000-87ffffff
  	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

  00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
  	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Kernel driver in use: lpc_ich

  00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 11
  	Region 0: I/O ports at 01f0 [size=8]
  	Region 1: I/O ports at 03f4
  	Region 2: I/O ports at 0170 [size=8]
  	Region 3: I/O ports at 0374
  	Region 4: I/O ports at bfa0 [size=16]
  	Region 5: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]
  	Kernel driver in use: ata_piix

  00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 5
  	Region 0: I/O ports at b800 [size=256]
  	Region 1: I/O ports at bc40 [size=64]
  	Region 2: Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
  	Region 3: Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: snd_intel8x0

  00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
  	Subsystem: Broadcom Corporation Device [14e4:4d64]
  	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Interrupt: pin B routed to IRQ 5
  	Region 0: I/O ports at b400 [size=256]
  	Region 1: I/O ports at b080 [size=128]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 02) (prog-if 00 [VGA controller])
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
  	Interrupt: pin A routed to IRQ 11
  	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
  	Region 1: I/O ports at c000 [size=256]
  	Region 2: Memory at fcff0000 (32-bit, non-prefetchable) [size=64K]
  	[virtual] Expansion ROM at fc000000 [disabled] [size=128K]
  	Capabilities: [58] AGP version 2.0
  		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
  		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: radeon

  02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet [14e4:165d] (rev 01)
  	Subsystem: Dell Latitude D400 [1028:865d]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32 (16000ns min), Cache Line Size: 32 bytes
  	Interrupt: pin A routed to IRQ 11
  	Region 0: Memory at faff0000 (64-bit, non-prefetchable) [size=64K]
  	Expansion ROM at <ignored> [disabled]
  	Capabilities: [48] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
  	Capabilities: [50] Vital Product Data
  pcilib: sysfs_read_vpd: read failed: Connection timed out
  		Not readable
  	Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
  		Address: 7fefc7fdffffa76c  Data: dfdf
  	Kernel driver in use: tg3

  02:01.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller [1217:7113] (rev 20)
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 168
  	Interrupt: pin A routed to IRQ 11
  	Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
  	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
  	Memory window 0: 80000000-83ffffff (prefetchable)
  	Memory window 1: 8c000000-8fffffff
  	I/O window 0: 0000d000-0000d0ff
  	I/O window 1: 0000d400-0000d4ff
  	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
  	16-bit legacy interface ports at 0001
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
  		Bridge: PM- B3+
  	Kernel driver in use: yenta_cardbus

  02:01.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller [1217:7113] (rev 20)
  	Subsystem: Dell Device [1028:011e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 168
  	Interrupt: pin A routed to IRQ 11
  	Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
  	Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
  	Memory window 0: 84000000-87ffffff (prefetchable)
  	Memory window 1: 94000000-97ffffff
  	I/O window 0: 0000d800-0000d8ff
  	I/O window 1: 0000dc00-0000dcff
  	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
  	16-bit legacy interface ports at 0001
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
  		Bridge: PM- B3+
  	Kernel driver in use: yenta_cardbus

  02:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
  	Subsystem: Intel Corporation Dell B130 laptop integrated WLAN [8086:2721]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
  	Interrupt: pin A routed to IRQ 5
  	Region 0: Memory at fafef000 (32-bit, non-prefetchable) [size=4K]
  	Capabilities: [dc] Power Management version 2
  		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
  	Kernel driver in use: ipw2200

  So, since Ubuntu is not intended to work on a "non-PAE CPU", the bug
  isn't that it doesn't work, but that Update Manager tried to install
  it...

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-16-generic (not installed)
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic i686
  ApportVersion: 2.19.1-0ubuntu4
  Architecture: i386
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  kent       1792 F.... pulseaudio
  Date: Sun Nov  1 12:52:32 2015
  DuplicateSignature: package:linux-image-4.2.0-16-generic:(not installed):subprocess new pre-installation script returned error exit status 1
  ErrorMessage: subprocess new pre-installation script returned error exit status 1
  HibernationDevice: RESUME=UUID=0dc01c56-1599-4a76-8717-22f4d37942f7
  InstallationDate: Installed on 2014-04-22 (558 days ago)
  InstallationMedia: Xubuntu 10.04 "Lucid Lynx" - Release i386 (20100429)
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 002: ID 1241:1166 Belkin MI-2150 Trust Mouse
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Dell Computer Corporation Inspiron 600m
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-15-generic root=UUID=b2762d0a-9345-41cf-a5cf-e98bb3b6d350 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: grub-pc 2.02~beta2-29
  RfKill:
   0: phy0: Wireless LAN
   	Soft blocked: no
   	Hard blocked: no
  SourcePackage: linux
  Title: package linux-image-4.2.0-16-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1
  UpgradeStatus: Upgraded to wily on 2015-11-01 (0 days ago)
  dmi.bios.date: 06/29/2005
  dmi.bios.vendor: Dell Computer Corporation
  dmi.bios.version: A17
  dmi.board.vendor: Dell Computer Corporation
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Computer Corporation
  dmi.modalias: dmi:bvnDellComputerCorporation:bvrA17:bd06/29/2005:svnDellComputerCorporation:pnInspiron600m:pvr:rvnDellComputerCorporation:rn:rvr:cvnDellComputerCorporation:ct8:cvr:
  dmi.product.name: Inspiron 600m
  dmi.sys.vendor: Dell Computer Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1512149/+subscriptions


Follow ups