kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #14648
[Bug 1223717] Re: [LENOVO ThinkPad W520] suspend/resume failure
I have tried with kernel from http://kernel.ubuntu.com/~kernel-
ppa/mainline/daily/current/ with a complete failure while starting X.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-999-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201309120451 SMP Thu Sep 12 08:52:29 UTC 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-999-generic root=UUID=8e6d4de4-f79c-4028-b94d-2b9302a8b78c ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf19efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf19f000-0x00000000bf69efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf69f000-0x00000000bf79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 4284A54/4284A54, BIOS 8BET56WW (1.36 ) 01/19/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask E00000000 write-back
[ 0.000000] 6 base 400000000 mask FC0000000 write-back
[ 0.000000] 7 base 43E000000 mask FFE000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43de00000-0x43dffffff]
[ 0.000000] [mem 0x43de00000-0x43dffffff] page 2M
[ 0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43ddfffff]
[ 0.000000] [mem 0x43c000000-0x43ddfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
[ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf19efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbeffffff] page 2M
[ 0.000000] [mem 0xbf000000-0xbf19efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] [mem 0xbf7ff000-0xbf7fffff] page 4k
[ 0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35fd4000-0x36fe1fff]
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bf7fe120 000A4 (v01 LENOVO TP-8B 00001360 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000bf7e8000 000F4 (v04 LENOVO TP-8B 00001360 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000bf7eb000 0E6E0 (v01 LENOVO TP-8B 00001360 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bf72d000 00040
[ 0.000000] ACPI: SLIC 00000000bf7fd000 00176 (v01 LENOVO TP-8B 00001360 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000bf7fc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf7fb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf7fa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000bf7e7000 00038 (v01 LENOVO TP-8B 00001360 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000bf7e6000 00098 (v01 LENOVO TP-8B 00001360 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000bf7e5000 0003C (v01 LENOVO TP-8B 00001360 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000bf7e4000 00052 (v01 LENOVO TP-8B 00001360 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000bf7ea000 000A5 (v32 LENOVO TP-8B 00001360 PTL 00000002)
[ 0.000000] ACPI: TCPA 00000000bf7e3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000bf7e2000 00AD7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf7e1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bf7e0000 0003E (v01 LENOVO TP-8B 00001360 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000bf7df000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000bf7de000 00292 (v01 LENOVO TP-8B 00001360 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43dffffff]
[ 0.000000] NODE_DATA [mem 0x43dfed000-0x43dff1fff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042d600000-ffff88043d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf19efff]
[ 0.000000] node 0: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x43dffffff]
[ 0.000000] On node 0 totalpages: 4182332
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12167 pages used for memmap
[ 0.000000] DMA32 zone: 778656 pages, LIFO batch:31
[ 0.000000] Normal zone: 53120 pages used for memmap
[ 0.000000] Normal zone: 3399680 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf19f000-0xbf69efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf69f000-0xbf79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf79f000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043dc00000 s86464 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116960
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-999-generic root=UUID=8e6d4de4-f79c-4028-b94d-2b9302a8b78c ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16367044K/16729328K available (7533K kernel code, 1121K rwdata, 3464K rodata, 1340K init, 1484K bss, 362284K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.016000] tsc: Unable to calibrate against PIT
[ 0.016000] tsc: using HPET reference calibration
[ 0.016000] tsc: Detected 2392.021 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4784.04 BogoMIPS (lpj=9568084)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000042] AppArmor: AppArmor initialized
[ 0.000043] Yama: becoming mindful.
[ 0.001207] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004820] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006201] Mount-cache hash table entries: 256
[ 0.006368] Initializing cgroup subsys memory
[ 0.006375] Initializing cgroup subsys devices
[ 0.006377] Initializing cgroup subsys freezer
[ 0.006379] Initializing cgroup subsys blkio
[ 0.006380] Initializing cgroup subsys perf_event
[ 0.006382] Initializing cgroup subsys hugetlb
[ 0.006402] Disabled fast string operations
[ 0.006404] CPU: Physical Processor ID: 0
[ 0.006405] CPU: Processor Core ID: 0
[ 0.006409] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006409] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006412] mce: CPU supports 9 MCE banks
[ 0.006425] CPU0: Thermal monitoring enabled (TM1)
[ 0.006434] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.006434] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.006434] tlb_flushall_shift: 5
[ 0.006521] Freeing SMP alternatives memory: 28K (ffffffff81e69000 - ffffffff81e70000)
[ 0.007593] ACPI: Core revision 20130725
[ 0.014214] ACPI: All ACPI Tables successfully acquired
[ 0.025604] ftrace: allocating 30870 entries in 121 pages
[ 0.040439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080116] smpboot: CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[ 0.080124] TSC deadline timer enabled
[ 0.080133] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.080140] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.080142] ... version: 3
[ 0.080143] ... bit width: 48
[ 0.080143] ... generic registers: 4
[ 0.080144] ... value mask: 0000ffffffffffff
[ 0.080145] ... max period: 0000ffffffffffff
[ 0.080146] ... fixed-purpose events: 3
[ 0.080147] ... event mask: 000000070000000f
[ 0.092774] Disabled fast string operations
[ 0.094971] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.105995] Disabled fast string operations
[ 0.119129] Disabled fast string operations
[ 0.132261] Disabled fast string operations
[ 0.145390] Disabled fast string operations
[ 0.158623] Disabled fast string operations
[ 0.081808] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.171753] Disabled fast string operations
[ 0.173877] Brought up 8 CPUs
[ 0.173880] smpboot: Total of 8 processors activated (38272.33 BogoMIPS)
[ 0.181604] devtmpfs: initialized
[ 0.186458] EVM: security.selinux
[ 0.186460] EVM: security.SMACK64
[ 0.186461] EVM: security.capability
[ 0.186504] PM: Registering ACPI NVS region [mem 0xbf69f000-0xbf79efff] (1048576 bytes)
[ 0.187241] regulator-dummy: no parameters
[ 0.187272] RTC time: 7:42:32, date: 09/13/13
[ 0.187305] NET: Registered protocol family 16
[ 0.187405] cpuidle: using governor ladder
[ 0.187406] cpuidle: using governor menu
[ 0.187440] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.187442] ACPI: bus type PCI registered
[ 0.187444] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.187690] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.187693] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.192370] PCI: Using configuration type 1 for base access
[ 0.192666] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.192667] mtrr: probably your BIOS does not setup all CPUs.
[ 0.192668] mtrr: corrected configuration.
[ 0.193362] bio: create slab <bio-0> at 0
[ 0.193512] ACPI: Added _OSI(Module Device)
[ 0.193513] ACPI: Added _OSI(Processor Device)
[ 0.193514] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.193516] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.194891] ACPI: EC: EC description table is found, configuring boot EC
[ 0.198806] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.217873] ACPI: SSDT 00000000bf68c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.218226] ACPI: Dynamic OEM Table Load:
[ 0.218228] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.225663] ACPI: SSDT 00000000bf68da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.226045] ACPI: Dynamic OEM Table Load:
[ 0.226047] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.233544] ACPI: SSDT 00000000bf68bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.233893] ACPI: Dynamic OEM Table Load:
[ 0.233894] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.242510] ACPI: Interpreter enabled
[ 0.242515] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.242519] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.242530] ACPI: (supports S0 S3 S4 S5)
[ 0.242532] ACPI: Using IOAPIC for interrupt routing
[ 0.242551] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.243249] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.253957] ACPI: Power Resource [PUBS] (on)
[ 0.257882] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.257956] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.258028] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.258099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.258170] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.258227] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.258298] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.258368] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.258411] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.258556] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.258694] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.258695] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.258721] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.258849] PCI host bridge to bus 0000:00
[ 0.258852] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.258854] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.258855] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.258857] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.258859] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.258860] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.258868] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.258940] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.258970] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.259055] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.259080] pci 0000:00:16.0: reg 0x10: [mem 0xd5325000-0xd532500f 64bit]
[ 0.259158] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.259223] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 0.259243] pci 0000:00:16.3: reg 0x10: [io 0x6070-0x6077]
[ 0.259253] pci 0000:00:16.3: reg 0x14: [mem 0xd532c000-0xd532cfff]
[ 0.259386] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.259405] pci 0000:00:19.0: reg 0x10: [mem 0xd5300000-0xd531ffff]
[ 0.259413] pci 0000:00:19.0: reg 0x14: [mem 0xd532b000-0xd532bfff]
[ 0.259422] pci 0000:00:19.0: reg 0x18: [io 0x6040-0x605f]
[ 0.259486] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.259520] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.259555] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.259576] pci 0000:00:1a.0: reg 0x10: [mem 0xd532a000-0xd532a3ff]
[ 0.259667] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.259701] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.259734] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.259751] pci 0000:00:1b.0: reg 0x10: [mem 0xd5320000-0xd5323fff 64bit]
[ 0.259820] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.259858] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.259892] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.260011] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.260086] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.260216] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.260291] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.260420] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.260464] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.260493] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.260572] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.260637] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.260717] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.260754] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.260789] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.260811] pci 0000:00:1d.0: reg 0x10: [mem 0xd5329000-0xd53293ff]
[ 0.260903] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.260937] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.260969] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.261130] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.261149] pci 0000:00:1f.2: reg 0x10: [io 0x6068-0x606f]
[ 0.261158] pci 0000:00:1f.2: reg 0x14: [io 0x607c-0x607f]
[ 0.261166] pci 0000:00:1f.2: reg 0x18: [io 0x6060-0x6067]
[ 0.261174] pci 0000:00:1f.2: reg 0x1c: [io 0x6078-0x607b]
[ 0.261182] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f]
[ 0.261190] pci 0000:00:1f.2: reg 0x24: [mem 0xd5328000-0xd53287ff]
[ 0.261236] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.261291] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.261307] pci 0000:00:1f.3: reg 0x10: [mem 0xd5324000-0xd53240ff 64bit]
[ 0.261329] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.261447] pci 0000:01:00.0: [10de:0dfa] type 00 class 0x030000
[ 0.261457] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.261466] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.261474] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.261481] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 0.261488] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.261554] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[ 0.261562] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[ 0.269478] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.269486] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.269492] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.269502] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.269614] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.269854] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
[ 0.270018] pci 0000:03:00.0: reg 0x10: [mem 0xd5200000-0xd5201fff 64bit]
[ 0.270735] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.277608] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.277617] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
[ 0.277731] acpiphp: Slot [1] registered
[ 0.277738] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.277743] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.277748] pci 0000:00:1c.3: bridge window [mem 0xd4a00000-0xd51fffff]
[ 0.277757] pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd38fffff 64bit pref]
[ 0.277891] pci 0000:0d:00.0: [1180:e822] type 00 class 0x088001
[ 0.277909] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.277935] pci 0000:0d:00.0: reg 0x10: [mem 0xd4201000-0xd42010ff]
[ 0.278132] pci 0000:0d:00.0: supports D1 D2
[ 0.278134] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.278261] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.278287] pci 0000:0d:00.3: reg 0x10: [mem 0xd4200000-0xd42007ff]
[ 0.278483] pci 0000:0d:00.3: supports D1 D2
[ 0.278484] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285545] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.285555] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.285564] pci 0000:00:1c.4: bridge window [mem 0xd4200000-0xd49fffff]
[ 0.285578] pci 0000:00:1c.4: bridge window [mem 0xd3900000-0xd40fffff 64bit pref]
[ 0.285672] pci 0000:0e:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.285699] pci 0000:0e:00.0: reg 0x10: [mem 0xd4100000-0xd4101fff 64bit]
[ 0.285834] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
[ 0.293500] pci 0000:00:1c.6: PCI bridge to [bus 0e]
[ 0.293515] pci 0000:00:1c.6: bridge window [mem 0xd4100000-0xd41fffff]
[ 0.294565] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.294576] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.294618] Found 1 acpi root devices
[ 0.294676] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.294757] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.294759] vgaarb: loaded
[ 0.294760] vgaarb: bridge control possible 0000:01:00.0
[ 0.294891] SCSI subsystem initialized
[ 0.294930] libata version 3.00 loaded.
[ 0.294943] ACPI: bus type USB registered
[ 0.294957] usbcore: registered new interface driver usbfs
[ 0.294963] usbcore: registered new interface driver hub
[ 0.294982] usbcore: registered new device driver usb
[ 0.295079] PCI: Using ACPI for IRQ routing
[ 0.296759] PCI: pci_cache_line_size set to 64 bytes
[ 0.296956] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.296958] e820: reserve RAM buffer [mem 0xbf19f000-0xbfffffff]
[ 0.296959] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.296961] e820: reserve RAM buffer [mem 0x43e000000-0x43fffffff]
[ 0.297030] NetLabel: Initializing
[ 0.297031] NetLabel: domain hash size = 128
[ 0.297032] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.297040] NetLabel: unlabeled traffic allowed by default
[ 0.297090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.297094] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.299123] Switched to clocksource hpet
[ 0.303254] AppArmor: AppArmor Filesystem Enabled
[ 0.303275] pnp: PnP ACPI init
[ 0.303286] ACPI: bus type PNP registered
[ 0.303638] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.303641] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.303643] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.303645] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.303646] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.303648] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.303649] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.303651] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.303653] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.303654] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.303656] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.303657] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.303659] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.303661] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.303662] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.303664] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.303666] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.303669] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.303764] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 0.303766] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.303767] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.303769] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.303770] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.303773] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.303775] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.303776] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.303778] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.303780] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.303781] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.303783] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.303785] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303835] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.303843] pnp 00:03: [dma 4]
[ 0.303855] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.303877] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.303902] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.303924] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.303944] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.303969] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.304008] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.304427] pnp: PnP ACPI: found 10 devices
[ 0.304429] ACPI: bus type PNP unregistered
[ 0.310586] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.310645] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[ 0.310647] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.310649] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.310652] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.310655] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.310658] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.310675] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.310683] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
[ 0.310694] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.310697] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.310704] pci 0000:00:1c.3: bridge window [mem 0xd4a00000-0xd51fffff]
[ 0.310709] pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd38fffff 64bit pref]
[ 0.310718] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.310721] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.310726] pci 0000:00:1c.4: bridge window [mem 0xd4200000-0xd49fffff]
[ 0.310730] pci 0000:00:1c.4: bridge window [mem 0xd3900000-0xd40fffff 64bit pref]
[ 0.310736] pci 0000:00:1c.6: PCI bridge to [bus 0e]
[ 0.310741] pci 0000:00:1c.6: bridge window [mem 0xd4100000-0xd41fffff]
[ 0.310750] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.310752] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.310754] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310755] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.310756] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.310758] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.310760] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.310761] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.310763] pci_bus 0000:03: resource 1 [mem 0xd5200000-0xd52fffff]
[ 0.310765] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.310766] pci_bus 0000:05: resource 1 [mem 0xd4a00000-0xd51fffff]
[ 0.310768] pci_bus 0000:05: resource 2 [mem 0xd3100000-0xd38fffff 64bit pref]
[ 0.310769] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.310771] pci_bus 0000:0d: resource 1 [mem 0xd4200000-0xd49fffff]
[ 0.310772] pci_bus 0000:0d: resource 2 [mem 0xd3900000-0xd40fffff 64bit pref]
[ 0.310774] pci_bus 0000:0e: resource 1 [mem 0xd4100000-0xd41fffff]
[ 0.310799] NET: Registered protocol family 2
[ 0.311052] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.311406] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.311530] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.311550] TCP: reno registered
[ 0.311570] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.311631] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.311722] NET: Registered protocol family 1
[ 0.311984] pci 0000:01:00.0: Boot video device
[ 0.312171] PCI: CLS 64 bytes, default 64
[ 0.312212] Trying to unpack rootfs image as initramfs...
[ 0.589869] Freeing initrd memory: 16440K (ffff880035fd4000 - ffff880036fe2000)
[ 0.589873] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.589876] software IO TLB [mem 0xbb19f000-0xbf19f000] (64MB) mapped at [ffff8800bb19f000-ffff8800bf19efff]
[ 0.590172] Scanning for low memory corruption every 60 seconds
[ 0.590435] Initialise module verification
[ 0.590469] audit: initializing netlink socket (disabled)
[ 0.590478] type=2000 audit(1379058152.580:1): initialized
[ 0.618574] bounce pool size: 64 pages
[ 0.618584] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.619910] zbud: loaded
[ 0.620029] VFS: Disk quotas dquot_6.5.2
[ 0.620061] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.620452] fuse init (API version 7.22)
[ 0.620515] msgmni has been set to 31999
[ 0.620972] Key type asymmetric registered
[ 0.620974] Asymmetric key parser 'x509' registered
[ 0.620999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.621043] io scheduler noop registered
[ 0.621045] io scheduler deadline registered (default)
[ 0.621064] io scheduler cfq registered
[ 0.621209] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.621678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.621691] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.621744] intel_idle: MWAIT substates: 0x21120
[ 0.621745] intel_idle: v0.4 model 0x2A
[ 0.621746] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.622368] ACPI: AC Adapter [AC] (on-line)
[ 0.622488] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.622689] ACPI: Lid Switch [LID]
[ 0.622734] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.622737] ACPI: Sleep Button [SLPB]
[ 0.622819] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.622821] ACPI: Power Button [PWRF]
[ 0.622914] ACPI: Requesting acpi_cpufreq
[ 0.625111] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.625114] ACPI: Thermal Zone [THM0] (60 C)
[ 0.625135] GHES: HEST is not enabled!
[ 0.625214] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.647245] 0000:00:16.3: ttyS4 at I/O 0x6070 (irq = 19, base_baud = 115200) is a 16550A
[ 0.647497] Linux agpgart interface v0.103
[ 0.648994] brd: module loaded
[ 0.649878] loop: module loaded
[ 0.650295] libphy: Fixed MDIO Bus: probed
[ 0.650358] tun: Universal TUN/TAP device driver, 1.6
[ 0.650359] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.650396] PPP generic driver version 2.4.2
[ 0.650435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.650438] ehci-pci: EHCI PCI platform driver
[ 0.650506] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.650515] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.650519] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.650532] ehci-pci 0000:00:1a.0: debug port 2
[ 0.654452] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.654466] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd532a000
[ 0.657419] ACPI: Battery Slot [BAT0] (battery present)
[ 0.663089] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.663139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.663141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.663143] usb usb1: Product: EHCI Host Controller
[ 0.663144] usb usb1: Manufacturer: Linux 3.11.0-999-generic ehci_hcd
[ 0.663145] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.663237] hub 1-0:1.0: USB hub found
[ 0.663244] hub 1-0:1.0: 3 ports detected
[ 0.663396] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.663402] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.663407] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.663419] ehci-pci 0000:00:1d.0: debug port 2
[ 0.667324] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.667338] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd5329000
[ 0.679086] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.679132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.679133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.679135] usb usb2: Product: EHCI Host Controller
[ 0.679136] usb usb2: Manufacturer: Linux 3.11.0-999-generic ehci_hcd
[ 0.679138] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.679261] hub 2-0:1.0: USB hub found
[ 0.679267] hub 2-0:1.0: 3 ports detected
[ 0.679356] ehci-platform: EHCI generic platform driver
[ 0.679368] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.679369] ohci-platform: OHCI generic platform driver
[ 0.679374] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.679429] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[ 0.679433] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 3
[ 0.679614] xhci_hcd 0000:0e:00.0: irq 41 for MSI/MSI-X
[ 0.679619] xhci_hcd 0000:0e:00.0: irq 42 for MSI/MSI-X
[ 0.679624] xhci_hcd 0000:0e:00.0: irq 43 for MSI/MSI-X
[ 0.679628] xhci_hcd 0000:0e:00.0: irq 44 for MSI/MSI-X
[ 0.679632] xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
[ 0.679637] xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
[ 0.679641] xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
[ 0.679646] xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
[ 0.679798] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.679800] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.679801] usb usb3: Product: xHCI Host Controller
[ 0.679803] usb usb3: Manufacturer: Linux 3.11.0-999-generic xhci_hcd
[ 0.679804] usb usb3: SerialNumber: 0000:0e:00.0
[ 0.679917] hub 3-0:1.0: USB hub found
[ 0.679928] hub 3-0:1.0: 2 ports detected
[ 0.679993] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[ 0.679996] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 4
[ 0.683047] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.683048] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.683050] usb usb4: Product: xHCI Host Controller
[ 0.683051] usb usb4: Manufacturer: Linux 3.11.0-999-generic xhci_hcd
[ 0.683053] usb usb4: SerialNumber: 0000:0e:00.0
[ 0.683180] hub 4-0:1.0: USB hub found
[ 0.683190] hub 4-0:1.0: 2 ports detected
[ 0.691146] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.696805] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.696809] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.696980] mousedev: PS/2 mouse device common for all mice
[ 0.697242] rtc_cmos 00:06: RTC can wake from S4
[ 0.697397] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.697426] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.697471] device-mapper: uevent: version 1.0.3
[ 0.697565] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@xxxxxxxxxx
[ 0.697570] Intel P-state driver initializing.
[ 0.697581] Intel pstate controlling: cpu 0
[ 0.697593] Intel pstate controlling: cpu 1
[ 0.697606] Intel pstate controlling: cpu 2
[ 0.697617] Intel pstate controlling: cpu 3
[ 0.697625] Intel pstate controlling: cpu 4
[ 0.697634] Intel pstate controlling: cpu 5
[ 0.697642] Intel pstate controlling: cpu 6
[ 0.697650] Intel pstate controlling: cpu 7
[ 0.697673] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.697848] ashmem: initialized
[ 0.697981] TCP: cubic registered
[ 0.698050] NET: Registered protocol family 10
[ 0.698211] NET: Registered protocol family 17
[ 0.698220] Key type dns_resolver registered
[ 0.698474] PM: Hibernation image not present or could not be loaded.
[ 0.698477] Loading module verification certificates
[ 0.699382] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 35c7af7eb6b8928133bd0aaabbf32460c6a65ad5'
[ 0.699391] registered taskstats version 1
[ 0.702064] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.702276] Key type trusted registered
[ 0.704692] Key type encrypted registered
[ 0.707032] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.707652] Magic number: 13:419:723
[ 0.707659] block loop3: hash matches
[ 0.707765] rtc_cmos 00:06: setting system clock to 2013-09-13 07:42:33 UTC (1379058153)
[ 0.708337] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.708339] EDD information not available.
[ 0.712186] Freeing unused kernel memory: 1340K (ffffffff81d1a000 - ffffffff81e69000)
[ 0.712192] Write protecting the kernel read-only data: 12288k
[ 0.715933] Freeing unused kernel memory: 648K (ffff88000175e000 - ffff880001800000)
[ 0.717796] Freeing unused kernel memory: 632K (ffff880001b62000 - ffff880001c00000)
[ 0.747748] systemd-udevd[142]: starting version 204
[ 0.775755] pps_core: LinuxPPS API ver. 1 registered
[ 0.775759] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.776871] sdhci: Secure Digital Host Controller Interface driver
[ 0.776873] sdhci: Copyright(c) Pierre Ossman
[ 0.777165] PTP clock support registered
[ 0.778704] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8)
[ 0.778866] mmc0: no vqmmc regulator found
[ 0.778868] mmc0: no vmmc regulator found
[ 0.778930] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 0.779814] ahci 0000:00:1f.2: version 3.0
[ 0.779914] ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
[ 0.779965] ahci: SSS flag set, parallel bus scan disabled
[ 0.780003] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.780005] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.780009] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.782916] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.782919] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.803576] scsi0 : ahci
[ 0.803675] scsi1 : ahci
[ 0.803751] scsi2 : ahci
[ 0.803828] scsi3 : ahci
[ 0.803903] scsi4 : ahci
[ 0.803979] scsi5 : ahci
[ 0.804010] ata1: SATA max UDMA/133 abar m2048@0xd5328000 port 0xd5328100 irq 49
[ 0.804012] ata2: SATA max UDMA/133 abar m2048@0xd5328000 port 0xd5328180 irq 49
[ 0.804013] ata3: DUMMY
[ 0.804016] ata4: SATA max UDMA/133 abar m2048@0xd5328000 port 0xd5328280 irq 49
[ 0.804018] ata5: SATA max UDMA/133 abar m2048@0xd5328000 port 0xd5328300 irq 49
[ 0.804018] ata6: DUMMY
[ 0.804166] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.804249] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.804268] e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
[ 0.851222] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 0.979214] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.003157] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.003165] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:05:87:d2
[ 1.003169] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.003209] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.111749] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.111759] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.112283] hub 1-1:1.0: USB hub found
[ 1.112367] hub 1-1:1.0: 6 ports detected
[ 1.123169] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.123742] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.123752] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.123758] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.124227] ata1.00: ATA-8: INTEL SSDSA2BW160G3L, 4PC1LE05, max UDMA/133
[ 1.124236] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.124835] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.124844] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.124850] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.125148] ata1.00: configured for UDMA/133
[ 1.125532] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2BW16 4PC1 PQ: 0 ANSI: 5
[ 1.125835] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.125889] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.126406] sd 0:0:0:0: [sda] Write Protect is off
[ 1.126416] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.126681] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.129184] sda: sda1 sda2 < sda5 sda6 >
[ 1.131191] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.223197] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.351424] firewire_core 0000:0d:00.3: created device fw0: GUID 3c970eff0587d2ff, S400
[ 1.355493] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.355502] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.355975] hub 2-1:1.0: USB hub found
[ 1.356088] hub 2-1:1.0: 8 ports detected
[ 1.427246] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.443110] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.446180] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.446637] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.446648] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.448370] ata2.00: ATAPI: Optiarc DVD RW AD-7740H, 1.S0, max UDMA/100
[ 1.451517] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.451978] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.451988] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.453782] ata2.00: configured for UDMA/100
[ 1.454879] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7740H 1.S0 PQ: 0 ANSI: 5
[ 1.457234] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.457241] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.457499] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.457592] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.524908] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 1.524917] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.524922] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 1.524925] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.524928] usb 1-1.4: SerialNumber: 7CE9D3DCC0DB
[ 1.587097] tsc: Refined TSC clocksource calibration: 2392.230 MHz
[ 1.595257] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.687752] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a
[ 1.687760] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.688384] hub 1-1.5:1.0: USB hub found
[ 1.688616] hub 1-1.5:1.0: 7 ports detected
[ 1.763212] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 1.775073] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.862222] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[ 1.862231] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.862237] usb 1-1.6: Product: Integrated Camera
[ 1.862241] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.935129] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.034078] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
[ 2.034088] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.034093] usb 2-1.5: Product: Integrated Smart Card Reader
[ 2.034097] usb 2-1.5: Manufacturer: Lenovo
[ 2.095039] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.107026] usb 1-1.5.2: new full-speed USB device number 6 using ehci-pci
[ 2.139758] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 2.139761] EXT4-fs (sda6): write access will be enabled during recovery
[ 2.163935] EXT4-fs (sda6): recovery complete
[ 2.164128] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.204014] usb 1-1.5.2: New USB device found, idVendor=047f, idProduct=ac01
[ 2.204019] usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.204021] usb 1-1.5.2: Product: Plantronics Savi 7xx
[ 2.204023] usb 1-1.5.2: Manufacturer: Plantronics
[ 2.291133] usb 1-1.5.5: new low-speed USB device number 7 using ehci-pci
[ 2.312623] init: ureadahead main process (229) terminated with status 5
[ 2.386709] usb 1-1.5.5: New USB device found, idVendor=17ef, idProduct=600e
[ 2.386712] usb 1-1.5.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.386713] usb 1-1.5.5: Product: Lenovo Optical Mouse
[ 2.393445] Adding 20478972k swap on /dev/sda1. Priority:-1 extents:1 across:20478972k SSFS
[ 2.475089] usb 1-1.5.6: new low-speed USB device number 8 using ehci-pci
[ 2.475618] systemd-udevd[354]: starting version 204
[ 2.476697] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 2.521384] lp: driver loaded but no devices found
[ 2.524454] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.583109] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.587430] Switched to clocksource tsc
[ 2.587846] acpi device:0b: registered as cooling_device8
[ 2.587895] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 2.587924] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input4
[ 2.589931] usb 1-1.5.6: New USB device found, idVendor=046d, idProduct=c312
[ 2.589934] usb 1-1.5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.589936] usb 1-1.5.6: Product: USB Multimedia Keyboard
[ 2.589938] usb 1-1.5.6: Manufacturer: LITEON Technology
[ 2.593942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130725/utaddress-251)
[ 2.593948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.593953] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 2.593956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.593957] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 2.593960] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.593961] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 2.593964] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.593965] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.601635] wmi: Mapper loaded
[ 2.602894] mei_me 0000:00:16.0: setting latency timer to 64
[ 2.602927] mei_me 0000:00:16.0: irq 51 for MSI/MSI-X
[ 2.620455] cfg80211: Calling CRDA to update world regulatory domain
[ 2.622867] Bluetooth: Core ver 2.16
[ 2.623023] NET: Registered protocol family 31
[ 2.623025] Bluetooth: HCI device and connection manager initialized
[ 2.623033] Bluetooth: HCI socket layer initialized
[ 2.623036] Bluetooth: L2CAP socket layer initialized
[ 2.623041] Bluetooth: SCO socket layer initialized
[ 2.628445] usbcore: registered new interface driver btusb
[ 2.631642] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[ 2.633229] [drm] Initialized drm 1.1.0 20060810
[ 2.637850] Non-volatile memory driver v1.3
[ 2.642875] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 2.643695] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.643697] Copyright(c) 2003-2013 Intel Corporation
[ 2.643730] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.643955] iwlwifi 0000:03:00.0: irq 52 for MSI/MSI-X
[ 2.645259] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.645262] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.645263] thinkpad_acpi: ThinkPad BIOS 8BET56WW (1.36 ), EC unknown
[ 2.645265] thinkpad_acpi: Lenovo ThinkPad W520, model 4284A54
[ 2.645605] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.645706] thinkpad_acpi: radio switch found; radios are enabled
[ 2.645713] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.645713] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.650475] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.650621] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.651025] type=1400 audit(1379058155.439:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
[ 2.651030] type=1400 audit(1379058155.439:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
[ 2.651034] type=1400 audit(1379058155.439:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[ 2.651035] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.651119] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.651495] type=1400 audit(1379058155.439:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
[ 2.651498] type=1400 audit(1379058155.439:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[ 2.651730] type=1400 audit(1379058155.439:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[ 2.652336] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.653474] Linux video capture interface: v2.00
[ 2.671043] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[ 2.675602] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 2.678036] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input6
[ 2.678107] usbcore: registered new interface driver uvcvideo
[ 2.678108] USB Video Class driver (1.1.1)
[ 2.678990] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130725/nsarguments-95)
[ 2.679050] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 2.679267] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 2.679461] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 2.679465] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG_.VID_ handle
[ 2.679749] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1d00a1
[ 2.679751] nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[ 2.679752] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 2.680830] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 2.682992] hda_codec: CX20590: BIOS auto-probing.
[ 2.683436] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 2.683438] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.683440] hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 2.683440] mono: mono_out=0x0
[ 2.683441] inputs:
[ 2.683443] Mic=0x1b
[ 2.683444] Internal Mic=0x23
[ 2.683445] Dock Mic=0x1a
[ 2.684714] hda_codec: Enable sync_write for stable communication
[ 2.692036] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 2.692039] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.692041] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.692042] mono: mono_out=0x0
[ 2.692043] inputs:
[ 2.695141] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.695271] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.695384] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.695496] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.712955] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[ 2.718567] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[ 2.719018] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[ 2.719332] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x25
[ 2.719379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.719380] Bluetooth: BNEP filters: protocol multicast
[ 2.719386] Bluetooth: BNEP socket layer initialized
[ 2.719691] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x25
[ 2.719988] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x25
[ 2.720287] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x25
[ 2.720620] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 2.726188] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 2.738339] Bluetooth: RFCOMM TTY layer initialized
[ 2.738349] Bluetooth: RFCOMM socket layer initialized
[ 2.738351] Bluetooth: RFCOMM ver 1.11
[ 2.741624] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 2.741626] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 2.741712] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 2.741714] nouveau [ VBIOS][0000:01:00.0] version 70.08.55.00.0c
[ 2.746051] nouveau 0000:01:00.0: irq 54 for MSI/MSI-X
[ 2.746063] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 2.746095] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 2.746097] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 2.746099] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 2.761652] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.761655] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 2.761656] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.761658] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 2.761763] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 2.763509] cfg80211: World regulatory domain updated:
[ 2.763512] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.763514] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.763516] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.763517] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.763518] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.763520] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.775339] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 2.775349] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 2.775394] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 2.781330] [TTM] Zone kernel: Available graphics memory: 8193066 kiB
[ 2.781333] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.781335] [TTM] Initializing pool allocator
[ 2.781339] [TTM] Initializing DMA pool allocator
[ 2.781350] nouveau [ DRM] VRAM: 1024 MiB
[ 2.781351] nouveau [ DRM] GART: 1048576 MiB
[ 2.781356] nouveau [ DRM] TMDS table version 2.0
[ 2.781358] nouveau [ DRM] DCB version 4.0
[ 2.781360] nouveau [ DRM] DCB outp 00: 01800323 00010034
[ 2.781362] nouveau [ DRM] DCB outp 01: 02011300 00000000
[ 2.781364] nouveau [ DRM] DCB outp 02: 028223a6 0f220010
[ 2.781365] nouveau [ DRM] DCB outp 03: 02822362 00020010
[ 2.781367] nouveau [ DRM] DCB outp 04: 048333b6 0f220010
[ 2.781368] nouveau [ DRM] DCB outp 05: 04833372 00020010
[ 2.781370] nouveau [ DRM] DCB outp 06: 088443c6 0f220010
[ 2.781371] nouveau [ DRM] DCB outp 07: 08844382 00020010
[ 2.781373] nouveau [ DRM] DCB conn 00: 00000040
[ 2.781375] nouveau [ DRM] DCB conn 01: 00000100
[ 2.781377] nouveau [ DRM] DCB conn 02: 00101246
[ 2.781378] nouveau [ DRM] DCB conn 03: 00202346
[ 2.781380] nouveau [ DRM] DCB conn 04: 00410446
[ 2.782133] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.782135] [drm] No driver support for vblank timestamp query.
[ 2.782138] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 2.782330] nouveau [ DRM] 3 available performance level(s)
[ 2.782332] nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV
[ 2.782334] nouveau [ DRM] 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV
[ 2.782335] nouveau [ DRM] 3: core 700MHz shader 1400MHz memory 900MHz voltage 1080mV
[ 2.782337] nouveau [ DRM] c: core 202MHz shader 405MHz memory 324MHz voltage 900mV
[ 2.784376] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.786305] usbcore: registered new interface driver usbhid
[ 2.786308] usbhid: USB HID core driver
[ 2.787955] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 2.802648] 6:1:1: cannot get freq at ep 0x4
[ 2.818148] 6:2:1: cannot get freq at ep 0x84
[ 2.839755] input: Plantronics Plantronics Savi 7xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.3/input/input11
[ 2.840062] hid-generic 0003:047F:AC01.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Plantronics Plantronics Savi 7xx] on usb-0000:00:1a.0-1.5.2/input3
[ 2.840206] input: Lenovo Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.5/1-1.5.5:1.0/input/input12
[ 2.840344] hid-generic 0003:17EF:600E.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:00:1a.0-1.5.5/input0
[ 2.840505] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6:1.0/input/input13
[ 2.840573] hid-generic 0003:046D:C312.0003: input,hidraw2: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.0-1.5.6/input0
[ 2.863257] ppdev: user-space parallel port driver
[ 2.881529] init: failsafe main process (720) killed by TERM signal
[ 2.917464] init: avahi-cups-reload main process (738) terminated with status 1
[ 2.938774] type=1400 audit(1379058155.723:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=811 comm="apparmor_parser"
[ 2.938779] type=1400 audit(1379058155.723:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=811 comm="apparmor_parser"
[ 2.939391] type=1400 audit(1379058155.727:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=811 comm="apparmor_parser"
[ 2.944493] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000401 FAULT at 0x002010 [ IBUS TIMEOUT ]
[ 2.980187] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00040100 FAULT at 0x002008 [ IBUS TIMEOUT ]
[ 2.998835] usbcore: registered new interface driver snd-usb-audio
[ 3.006761] nouveau [ DRM] allocated 1920x1200 fb: 0x60000, bo ffff880427797c00
[ 3.006865] fbcon: nouveaufb (fb0) is primary device
[ 3.254929] e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
[ 3.358802] e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
[ 3.359064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.360706] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 3.360893] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 3.590221] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 3.590407] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 3.687171] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.796291] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
[ 3.796295] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.862158] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[ 4.383757] Console: switching to colour frame buffer device 200x56
[ 4.489303] nouveau E[ DRM] GPU lockup - switching to software fbcon
[ 4.490687] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 4.490688] nouveau 0000:01:00.0: registered panic notifier
[ 4.490692] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 4.490790] hda_intel: Disabling MSI
[ 4.490797] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 4.490831] hda-intel 0000:01:00.1: Disabling 64bit DMA
[ 4.494117] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[ 5.203382] init: plymouth-stop pre-start process (1130) terminated with status 2
[ 5.233422] init: plymouth main process (239) killed by SEGV signal
[ 5.290619] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[ 5.290719] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[ 5.290865] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[ 5.291011] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18
[ 7.653252] nouveau E[ PFIFO][0000:01:00.0] playlist update failed
[ 7.662253] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 7.662287] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.489330] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 9.752128] nouveau E[ PFIFO][0000:01:00.0] playlist update failed
[ 10.471266] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.806761] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19
[ 12.267429] nouveau E[ PFIFO][0000:01:00.0] playlist update failed
[ 12.867516] wlan0: authenticate with 80:17:7d:46:af:41
[ 12.902795] wlan0: send auth to 80:17:7d:46:af:41 (try 1/3)
[ 12.931200] wlan0: authenticated
[ 12.933585] wlan0: associate with 80:17:7d:46:af:41 (try 1/3)
[ 12.946107] wlan0: RX AssocResp from 80:17:7d:46:af:41 (capab=0x401 status=0 aid=1)
[ 12.949490] wlan0: associated
[ 12.949507] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 12.949752] cfg80211: Calling CRDA for country: GB
[ 12.951533] cfg80211: Regulatory domain changed to country: GB
[ 12.951535] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.951537] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.951538] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.951538] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.951539] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 12.951540] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
** Attachment added: "xorg.log"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1223717/+attachment/3818996/+files/xorg.log
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1223717
Title:
[LENOVO ThinkPad W520] suspend/resume failure
Status in “linux” package in Ubuntu:
Incomplete
Bug description:
Problem while resuming and suspending.
ProblemType: KernelOops
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-5-generic 3.11.0-5.11
ProcVersionSignature: Ubuntu 3.11.0-6.12-generic 3.11.0
Uname: Linux 3.11.0-6-generic x86_64
Annotation: This occured during a previous suspend and prevented it from resuming properly.
ApportVersion: 2.12.1-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: peayala 2041 F.... pulseaudio
/dev/snd/controlC0: peayala 2041 F.... pulseaudio
Date: Tue Sep 10 09:26:53 2013
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: suspend/resume
HibernationDevice: RESUME=UUID=3b8f1002-b842-47bb-941c-b297333c19e4
InstallationDate: Installed on 2013-09-03 (7 days ago)
InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130902)
InterpreterPath: /usr/bin/python3.3
MachineType: LENOVO 4284A54
MarkForUpload: True
ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
ProcEnviron:
TERM=linux
PATH=(custom, no user)
ProcFB:
0 nouveaufb
1 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-6-generic root=UUID=8e6d4de4-f79c-4028-b94d-2b9302a8b78c ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding.
RelatedPackageVersions:
linux-restricted-modules-3.11.0-6-generic N/A
linux-backports-modules-3.11.0-6-generic N/A
linux-firmware 1.113
SourcePackage: linux
Title: [LENOVO 4284A54] suspend/resume failure
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:
dmi.bios.date: 01/19/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: 8BET56WW (1.36 )
dmi.board.asset.tag: Not Available
dmi.board.name: 4284A54
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr8BET56WW(1.36):bd01/19/2012:svnLENOVO:pn4284A54:pvrThinkPadW520:rvnLENOVO:rn4284A54:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 4284A54
dmi.product.version: ThinkPad W520
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1223717/+subscriptions
References