kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #151830
[Bug 1510405] Re: Direct firmware load for radeon/kaveri_sdma1.bin failed with error -2
This bug was fixed in the package linux - 4.2.0-21.25
---------------
linux (4.2.0-21.25) wily; urgency=low
[ Luis Henriques ]
* Release Tracking Bug
- LP: #1522108
[ Upstream Kernel Changes ]
* staging/dgnc: fix info leak in ioctl
- LP: #1509565
- CVE-2015-7885
* [media] media/vivid-osd: fix info leak in ioctl
- LP: #1509564
- CVE-2015-7884
* KEYS: Fix race between key destruction and finding a keyring by name
- LP: #1508856
- CVE-2015-7872
* KEYS: Fix crash when attempt to garbage collect an uninstantiated
keyring
- LP: #1508856
- CVE-2015-7872
* KEYS: Don't permit request_key() to construct a new keyring
- LP: #1508856
- CVE-2015-7872
* isdn_ppp: Add checks for allocation failure in isdn_ppp_open()
- LP: #1508329
- CVE-2015-7799
* ppp, slip: Validate VJ compression slot parameters completely
- LP: #1508329
- CVE-2015-7799
linux (4.2.0-20.24) wily; urgency=low
[ Brad Figg ]
* Release Tracking Bug
- LP: #1521753
[ Andy Whitcroft ]
* [Tests] gcc-multilib does not exist on ppc64el
- LP: #1515541
[ Joseph Salisbury ]
* SAUCE: scsi_sysfs: protect against double execution of
__scsi_remove_device()
- LP: #1509029
[ Manoj Kumar ]
* SAUCE: (noup) cxlflash: Fix to escalate LINK_RESET also on port 1
- LP: #1513583
[ Matthew R. Ochs ]
* SAUCE: (noup) cxlflash: Fix to avoid virtual LUN failover failure
- LP: #1513583
[ Oren Givon ]
* SAUCE: (noup) iwlwifi: Add new PCI IDs for the 8260 series
- LP: #1517375
[ Seth Forshee ]
* [Config] CONFIG_DRM_AMDGPU_CIK=n
- LP: #1510405
[ Upstream Kernel Changes ]
* net/mlx5e: Disable VLAN filter in promiscuous mode
- LP: #1514861
* drivers: net: xgene: fix RGMII 10/100Mb mode
- LP: #1433290
* HID: rmi: Disable scanning if the device is not a wake source
- LP: #1515503
* HID: rmi: Set F01 interrupt enable register when not set
- LP: #1515503
* net/mlx5e: Ethtool link speed setting fixes
- LP: #1517919
* scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
- LP: #1517942
* x86/ioapic: Disable interrupts when re-routing legacy IRQs
- LP: #1508593
* xhci: Workaround to get Intel xHCI reset working more reliably
* megaraid_sas: Do not use PAGE_SIZE for max_sectors
- LP: #1475166
* net: usb: cdc_ether: add Dell DW5580 as a mobile broadband adapter
- LP: #1513847
* KVM: svm: unconditionally intercept #DB
- LP: #1520184
- CVE-2015-8104
-- Luis Henriques <luis.henriques@xxxxxxxxxxxxx> Wed, 02 Dec 2015
17:30:58 +0000
** Changed in: linux (Ubuntu Wily)
Status: In Progress => Fix Released
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7799
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7872
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7884
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7885
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-8104
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1510405
Title:
Direct firmware load for radeon/kaveri_sdma1.bin failed with error -2
Status in linux package in Ubuntu:
Fix Released
Status in linux-firmware package in Ubuntu:
Invalid
Status in linux source package in Wily:
Fix Released
Status in linux-firmware source package in Wily:
Invalid
Status in linux source package in Xenial:
Fix Released
Status in linux-firmware source package in Xenial:
Invalid
Bug description:
== SRU Justification ==
Impact: CONFIG_DRM_AMDGPU_CIK enables experimental support for some
AMD hardware in the amdgpu driver. It's not considered stable yet and
is not working properly with some hardware.
Fix: Disable this option. The hardware which is no longer supported by
amdgpu is all supported by the radeon driver.
Regression Potential: It's possible that some regressions might be
seen by users with affected hardware, but generally using radeon for
this hardware should be more stable.
---
Version 1.149 of the package does not have
/lib/firmware/radeon/kaveri_sdma1.bin needed for the latest AMD DRM
module.
After booting my monitor is blank.
For other AMD chipsets *_sdma1.bin is needed as well:
drivers/gpu/drm/amd/amdgpu/cik_sdma.c(126): snprintf(fw_name, sizeof(fw_name), "radeon/%s_sdma1.bin", chip_name);
Similar to https://bugs.launchpad.net/ubuntu/+source/linux-
firmware/+bug/1183777, https://bugs.launchpad.net/ubuntu/+source
/linux-firmware/+bug/1218691
Best regards,
Timothy
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1510405/+subscriptions
References