kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #151841
[Bug 1433290] Re: xgene-enet: doesn't work at 100Mbit
This bug was fixed in the package linux - 4.2.0-21.25
---------------
linux (4.2.0-21.25) wily; urgency=low
[ Luis Henriques ]
* Release Tracking Bug
- LP: #1522108
[ Upstream Kernel Changes ]
* staging/dgnc: fix info leak in ioctl
- LP: #1509565
- CVE-2015-7885
* [media] media/vivid-osd: fix info leak in ioctl
- LP: #1509564
- CVE-2015-7884
* KEYS: Fix race between key destruction and finding a keyring by name
- LP: #1508856
- CVE-2015-7872
* KEYS: Fix crash when attempt to garbage collect an uninstantiated
keyring
- LP: #1508856
- CVE-2015-7872
* KEYS: Don't permit request_key() to construct a new keyring
- LP: #1508856
- CVE-2015-7872
* isdn_ppp: Add checks for allocation failure in isdn_ppp_open()
- LP: #1508329
- CVE-2015-7799
* ppp, slip: Validate VJ compression slot parameters completely
- LP: #1508329
- CVE-2015-7799
linux (4.2.0-20.24) wily; urgency=low
[ Brad Figg ]
* Release Tracking Bug
- LP: #1521753
[ Andy Whitcroft ]
* [Tests] gcc-multilib does not exist on ppc64el
- LP: #1515541
[ Joseph Salisbury ]
* SAUCE: scsi_sysfs: protect against double execution of
__scsi_remove_device()
- LP: #1509029
[ Manoj Kumar ]
* SAUCE: (noup) cxlflash: Fix to escalate LINK_RESET also on port 1
- LP: #1513583
[ Matthew R. Ochs ]
* SAUCE: (noup) cxlflash: Fix to avoid virtual LUN failover failure
- LP: #1513583
[ Oren Givon ]
* SAUCE: (noup) iwlwifi: Add new PCI IDs for the 8260 series
- LP: #1517375
[ Seth Forshee ]
* [Config] CONFIG_DRM_AMDGPU_CIK=n
- LP: #1510405
[ Upstream Kernel Changes ]
* net/mlx5e: Disable VLAN filter in promiscuous mode
- LP: #1514861
* drivers: net: xgene: fix RGMII 10/100Mb mode
- LP: #1433290
* HID: rmi: Disable scanning if the device is not a wake source
- LP: #1515503
* HID: rmi: Set F01 interrupt enable register when not set
- LP: #1515503
* net/mlx5e: Ethtool link speed setting fixes
- LP: #1517919
* scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
- LP: #1517942
* x86/ioapic: Disable interrupts when re-routing legacy IRQs
- LP: #1508593
* xhci: Workaround to get Intel xHCI reset working more reliably
* megaraid_sas: Do not use PAGE_SIZE for max_sectors
- LP: #1475166
* net: usb: cdc_ether: add Dell DW5580 as a mobile broadband adapter
- LP: #1513847
* KVM: svm: unconditionally intercept #DB
- LP: #1520184
- CVE-2015-8104
-- Luis Henriques <luis.henriques@xxxxxxxxxxxxx> Wed, 02 Dec 2015
17:30:58 +0000
** Changed in: linux (Ubuntu Wily)
Status: Fix Committed => Fix Released
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7799
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7872
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7884
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7885
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-8104
** Changed in: linux (Ubuntu Wily)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1433290
Title:
xgene-enet: doesn't work at 100Mbit
Status in linux package in Ubuntu:
Confirmed
Status in linux source package in Trusty:
Confirmed
Status in linux source package in Vivid:
Confirmed
Status in linux source package in Wily:
Fix Released
Bug description:
[Impact]
The onboard NICs on APM Mustang boards don't work when connected to a 100MBit switch.
[Test Case]
1) Connect onboard NIC of a Mustang to a 100Mbit switch. I reproduced with both a Linksys WRT54GL and an old unmanaged Netgear switch.
2) Try to use it (e.g. dhclient)
[Regression Risk]
The fix is restricted to the xgene_enet driver, which limits the regression exposure to APM X-Gene systems.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1433290/+subscriptions
References