← Back to team overview

kernel-packages team mailing list archive

[Bug 1527966] Re: after latest updates, this started

 

Jim, thank you for reporting this and helping make Ubuntu better.

Could you please provide the precise line item you are referring to?

** Description changed:

- I have no additional information, until I looked at the syslog, I didnt notice anything different other than a little extra hdd hits.
- Version: Ubuntu 3.13.0-74.118-generic 3.13.11-ckt30
- 00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Capabilities: [44] HyperTransport: Slave or Primary Interface
- 		Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
- 		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
- 		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
- 		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
- 		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
- 		Revision ID: 1.03
- 		Link Frequency 0: 1.0GHz
- 		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
- 		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
- 		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
- 		Link Frequency 1: 200MHz
- 		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
- 		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
- 		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
- 		Prefetchable memory behind bridge Upper: 00-00
- 		Bus Number: 00
- 	Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
- 		Mapping Address Base: 00000000fee00000
+ I have no additional information, until I looked at the syslog, I didnt
+ notice anything different other than a little extra hdd hits.
  
- 00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 
- 00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2)
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Interrupt: pin A routed to IRQ 10
- 	Region 0: I/O ports at fc00 [size=64]
- 	Region 4: I/O ports at 1c00 [size=64]
- 	Region 5: I/O ports at 1c40 [size=64]
- 	Capabilities: [44] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Kernel driver in use: nForce2_smbus
- 
- 00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 
- 00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1 Controller [10de:03f1] (rev a3) (prog-if 10 [OHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0 (750ns min, 250ns max)
- 	Interrupt: pin A routed to IRQ 23
- 	Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
- 	Capabilities: [44] Power Management version 2
- 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Kernel driver in use: ohci-pci
- 
- 00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0 Controller [10de:03f2] (rev a3) (prog-if 20 [EHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0 (750ns min, 250ns max)
- 	Interrupt: pin B routed to IRQ 22
- 	Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
- 	Capabilities: [44] Debug port: BAR=1 offset=0098
- 	Capabilities: [80] Power Management version 2
- 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Kernel driver in use: ehci-pci
- 
- 00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
- 	I/O behind bridge: 0000b000-0000bfff
- 	Memory behind bridge: fde00000-fdefffff
- 	Prefetchable memory behind bridge: fdd00000-fddfffff
- 	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- 	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
- 		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
- 	Capabilities: [b8] Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
- 		Mapping Address Base: 00000000fee00000
- 
- 00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0 (500ns min, 1250ns max)
- 	Interrupt: pin B routed to IRQ 22
- 	Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
- 	Capabilities: [44] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
- 		Address: 0000000000000000  Data: 0000
- 		Masking: 00000000  Pending: 00000000
- 	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
- 	Kernel driver in use: snd_hda_intel
- 
- 00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0 (750ns min, 250ns max)
- 	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
- 	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
- 	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
- 	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
- 	Region 4: I/O ports at f000 [size=16]
- 	Capabilities: [44] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Kernel driver in use: pata_amd
- 
- 00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0 (250ns min, 5000ns max)
- 	Interrupt: pin A routed to IRQ 42
- 	Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
- 	Region 1: I/O ports at ec00 [size=8]
- 	Capabilities: [44] Power Management version 2
- 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
- 	Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
- 		Address: 00000000fee0100c  Data: 41a1
- 		Masking: 000000fe  Pending: 00000000
- 	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
- 	Kernel driver in use: forcedeth
- 
- 00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0 (750ns min, 250ns max)
- 	Interrupt: pin A routed to IRQ 20
- 	Region 0: I/O ports at 09f0 [size=8]
- 	Region 1: I/O ports at 0bf0 [size=4]
- 	Region 2: I/O ports at 0970 [size=8]
- 	Region 3: I/O ports at 0b70 [size=4]
- 	Region 4: I/O ports at d800 [size=16]
- 	Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
- 	Capabilities: [44] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
- 		Address: 0000000000000000  Data: 0000
- 	Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
- 	Kernel driver in use: sata_nv
- 
- 00:08.1 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
- 	Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0 (750ns min, 250ns max)
- 	Interrupt: pin B routed to IRQ 21
- 	Region 0: I/O ports at 09e0 [size=8]
- 	Region 1: I/O ports at 0be0 [size=4]
- 	Region 2: I/O ports at 0960 [size=8]
- 	Region 3: I/O ports at 0b60 [size=4]
- 	Region 4: I/O ports at c400 [size=16]
- 	Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
- 	Capabilities: [44] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
- 		Address: 0000000000000000  Data: 0000
- 	Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
- 	Kernel driver in use: sata_nv
- 
- 00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) (prog-if 00 [Normal decode])
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 32 bytes
- 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- 	I/O behind bridge: 0000a000-0000afff
- 	Memory behind bridge: f8000000-fbffffff
- 	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
- 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- 	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
- 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 	Capabilities: [40] Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Capabilities: [48] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
- 		Address: 00000000fee0300c  Data: 4161
- 	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
- 		Mapping Address Base: 00000000fee00000
- 	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
- 		DevCap:	MaxPayload 256 bytes, PhantFunc 0
- 			ExtTag- RBE+
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- 			MaxPayload 128 bytes, MaxReadReq 512 bytes
- 		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- 		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
- 			ClockPM- Surprise- LLActRep+ BwNot-
- 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
- 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- 		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- 			Slot #1, PowerLimit 75.000W; Interlock- NoCompl-
- 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- 			Control: AttnInd Off, PwrInd On, Power- Interlock-
- 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- 			Changed: MRL- PresDet+ LinkState+
- 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- 		RootCap: CRSVisible-
- 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed- WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=WRR32
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- 			Status:	NegoPending- InProgress-
- 	Kernel driver in use: pcieport
- 
- 00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 32 bytes
- 	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
- 	I/O behind bridge: 00009000-00009fff
- 	Memory behind bridge: fdc00000-fdcfffff
- 	Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
- 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- 	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
- 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 	Capabilities: [40] Subsystem: Hewlett-Packard Company Device [103c:2a58]
- 	Capabilities: [48] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
- 		Address: 00000000fee0300c  Data: 4171
- 	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
- 		Mapping Address Base: 00000000fee00000
- 	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
- 		DevCap:	MaxPayload 256 bytes, PhantFunc 0
- 			ExtTag- RBE+
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- 			MaxPayload 128 bytes, MaxReadReq 512 bytes
- 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- 		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
- 			ClockPM- Surprise- LLActRep+ BwNot-
- 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
- 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- 		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- 			Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
- 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- 			Control: AttnInd Off, PwrInd On, Power- Interlock-
- 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- 			Changed: MRL- PresDet- LinkState-
- 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- 		RootCap: CRSVisible-
- 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed- WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=WRR32
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- 			Status:	NegoPending- InProgress-
- 	Kernel driver in use: pcieport
- 
- 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
- 	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Capabilities: [80] HyperTransport: Host or Secondary Interface
- 		Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
- 		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
- 		Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
- 		Revision ID: 1.02
- 		Link Frequency: 1.0GHz
- 		Link Error: <Prot- <Ovfl- <EOC- CTLTm-
- 		Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
- 		Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
- 
- 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
- 	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 
- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
- 	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 
- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
- 	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Capabilities: [f0] Secure device <?>
- 	Kernel driver in use: k8temp
- 
- 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT200 [GeForce GTX 260] [10de:05e2] (rev a1) (prog-if 00 [VGA controller])
- 	Subsystem: eVga.com. Corp. Device [3842:1262]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 32 bytes
- 	Interrupt: pin A routed to IRQ 43
- 	Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
- 	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
- 	Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
- 	Region 5: I/O ports at ac00 [size=128]
- 	Expansion ROM at fbf80000 [disabled] [size=512K]
- 	Capabilities: [60] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
- 		Address: 00000000fee0300c  Data: 41c1
- 	Capabilities: [78] Express (v1) Endpoint, MSI 00
- 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
- 			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- 			MaxPayload 128 bytes, MaxReadReq 512 bytes
- 		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- 		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <1us
- 			ClockPM- Surprise- LLActRep- BwNot-
- 		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- CommClk-
- 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- 		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed- WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=Fixed
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- 			Status:	NegoPending- InProgress-
- 	Capabilities: [128 v1] Power Budgeting <?>
- 	Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
- 	Kernel driver in use: nouveau
- 
- ProblemType: Bug
- DistroRelease: Ubuntu 14.04
- Package: linux-image-3.13.0-74-generic 3.13.0-74.118
- ProcVersionSignature: Ubuntu 3.13.0-74.118-generic 3.13.11-ckt30
- Uname: Linux 3.13.0-74-generic x86_64
- ApportVersion: 2.14.1-0ubuntu3.19
- Architecture: amd64
- AudioDevicesInUse:
-  USER        PID ACCESS COMMAND
-  /dev/snd/controlC0:  geekmonk  11925 F.... pulseaudio
- CRDA: Error: [Errno 2] No such file or directory: 'iw'
- Date: Sun Dec 20 00:51:01 2015
- HibernationDevice: RESUME=UUID=ac68d222-2e0d-4072-be09-23b15e8b5451
- InstallationDate: Installed on 2014-09-23 (452 days ago)
- InstallationMedia: Ubuntu-Server 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.3)
- IwConfig:
-  eth0      no wireless extensions.
-  
-  lo        no wireless extensions.
- Lsusb:
-  Bus 001 Device 003: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller
-  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-  Bus 002 Device 003: ID 0557:2213 ATEN International Co., Ltd CS682 2-Port USB 2.0 DVI KVM Switch
-  Bus 002 Device 002: ID 0557:8021 ATEN International Co., Ltd 
-  Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- MachineType: HP-Pavilion GG781AA-ABA a6110n
- ProcEnviron:
-  LANGUAGE=en_US
-  TERM=xterm
-  PATH=(custom, no user)
-  LANG=en_US.UTF-8
-  SHELL=/bin/bash
- ProcFB: 0 nouveaufb
- ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-74-generic root=UUID=fc69fd4c-0e1f-422f-827f-2bcd9a13fde6 ro drm.debug=0xe plymouth:debug
- RelatedPackageVersions:
-  linux-restricted-modules-3.13.0-74-generic N/A
-  linux-backports-modules-3.13.0-74-generic  N/A
-  linux-firmware                             1.127.19
- RfKill:
-  
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/29/2007
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 5.13
  dmi.board.name: NARRA2
  dmi.board.vendor: ASUSTek Computer INC.
  dmi.board.version: 2.00
  dmi.chassis.type: 3
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr5.13:bd10/29/2007:svnHP-Pavilion:pnGG781AA-ABAa6110n:pvr:rvnASUSTekComputerINC.:rnNARRA2:rvr2.00:cvnHewlett-Packard:ct3:cvrChassisVersion:
  dmi.product.name: GG781AA-ABA a6110n
  dmi.sys.vendor: HP-Pavilion

** Tags added: latest-bios-5.13

** Changed in: linux (Ubuntu)
   Importance: Undecided => Low

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527966

Title:
  after latest updates, this started

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I have no additional information, until I looked at the syslog, I
  didnt notice anything different other than a little extra hdd hits.

  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/29/2007
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 5.13
  dmi.board.name: NARRA2
  dmi.board.vendor: ASUSTek Computer INC.
  dmi.board.version: 2.00
  dmi.chassis.type: 3
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr5.13:bd10/29/2007:svnHP-Pavilion:pnGG781AA-ABAa6110n:pvr:rvnASUSTekComputerINC.:rnNARRA2:rvr2.00:cvnHewlett-Packard:ct3:cvrChassisVersion:
  dmi.product.name: GG781AA-ABA a6110n
  dmi.sys.vendor: HP-Pavilion

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527966/+subscriptions


References