kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #15522
[Bug 566379] Re: 8086:3582 [i855] X doesn't start with kernel 2.6.32-21 unless passing i915.modeset=1
This bug was reported nearly 3.5 years ago. 10.04 has reached EOL. It
was the only version of Ubuntu I had the problem with. I haven't used
Ubuntu since 11.10 so I do not know what the newer versions are like
with regards to this bug (if it has come back or not). Just as a side
note, after leaving Ubuntu for Linux Mint LMDE and then moving to Debian
Stable (Lenny, Squeeze and now Wheezy along with running Testing and
Sid) I used Squeeze for its entire Stable life and used it while it was
testing as well and it never had this problem at all.
It seems to me that this was a bug in Ubuntu (and derivatives) and not
in Debian so unless there is a very good reason for Ubuntu to still be
using 2.6.32 I won't be testing this after such a time frame has passed
by. It seems a pity that it takes 3.5 years to enquire if it has been
fixed (especially when posts above from 3.5 years ago show what needed
to be done).
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566379
Title:
8086:3582 [i855] X doesn't start with kernel 2.6.32-21 unless passing
i915.modeset=1
Status in Puppy Linux:
Invalid
Status in “linux” package in Ubuntu:
Incomplete
Status in “linux” source package in Lucid:
Triaged
Bug description:
Binary package hint: plymouth
Plymouth is broken on my laptop after updating to the new kernel
(2.6.32-21). I can get into Lucid with 2.6.32-20 with no problems and
Plymouth works and looks like it should but with 2.6.32-21 Plymouth
takes up the entire screen and then the laptop wont go any further. No
hdd activity, nothing.
Reboot and select recovery mode for 2.6.32-21, then FailsafeX, and
then select low graphics mode and everything is fine, infact it looks
like the graphics are normal.
Have tried reinstalling the kernel with no difference, also tried
reinstalling plymouth and still no difference. I am currently working
in kernel 2.6.32-21 in Low Graphics mode. The only things I can see by
going into Recovery > FailsafeX > Low Graphics is that Plymouth is
bypassed thus allowing the laptop to start.
If you need anymore information please ask.
Michael. (k3lt01)
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: plymouth 0.8.2-2
ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-21-generic i686
Architecture: i386
BootDmesg:
Date: Mon Apr 19 12:22:48 2010
DefaultPlymouth: /lib/plymouth/themes/ubuntu-logo/ubuntu-logo.plymouth
Lsusb:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Acer Extensa 2300
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5b9f99ef-ff48-42d9-91ac-1ab945ad5f4f ro single
ProcEnviron:
LANG=en_AU.utf8
SHELL=/bin/bash
ProcFB: 0 VGA16 VGA
SourcePackage: plymouth
TextPlymouth: Error: command ['readlink', '/etc/alternatives/text.plymouth'] failed with exit code 1:
dmi.bios.date: 08/03/2004
dmi.bios.vendor: ACER
dmi.bios.version: 3A07
dmi.board.name: Extensa 2300
dmi.board.vendor: Acer
dmi.board.version: Rev 1.0
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: Rev.1
dmi.modalias: dmi:bvnACER:bvr3A07:bd08/03/2004:svnAcer:pnExtensa2300:pvrRev1:rvnAcer:rnExtensa2300:rvrRev1.0:cvnAcer:ct10:cvrRev.1:
dmi.product.name: Extensa 2300
dmi.product.version: Rev 1
dmi.sys.vendor: Acer
To manage notifications about this bug go to:
https://bugs.launchpad.net/puppy/+bug/566379/+subscriptions