kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #15722
[Bug 1199366] Re: sky2 negotiating only 100Mb/s
This turned out to be the result of a faulty cable connection.
** Changed in: linux (Ubuntu)
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1199366
Title:
sky2 negotiating only 100Mb/s
Status in “linux” package in Ubuntu:
Invalid
Bug description:
Not sure exactly when this started, just noticed it.
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: pg
Wake-on: d
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err tx_err
Link detected: yes
driver: sky2
version: 1.30
firmware-version:
bus-info: 0000:03:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
sky2 0000:03:00.0 eth0: Link is up at 100 Mbps, full duplex, flow
control both
03:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon
Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] (rev 11)
Seems this has been reported upstream as well.
http://permalink.gmane.org/gmane.linux.network/260623
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-26-generic 3.8.0-26.38
ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
Uname: Linux 3.8.0-26-generic x86_64
ApportVersion: 2.9.2-0ubuntu8.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC2: valdiyen 2431 F.... pulseaudio
/dev/snd/controlC1: valdiyen 2431 F.... pulseaudio
/dev/snd/controlC0: valdiyen 2431 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
Date: Tue Jul 9 09:10:42 2013
EcryptfsInUse: Yes
InstallationDate: Installed on 2013-07-08 (0 days ago)
InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
IwConfig:
eth0 no wireless extensions.
lo no wireless extensions.
virbr0 no wireless extensions.
MachineType: System manufacturer System Product Name
MarkForUpload: True
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-26-generic root=UUID=dd1185e9-a17e-428d-bd3c-dd49bc96bf28 ro rootflags=subvol=@ quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.8.0-26-generic N/A
linux-backports-modules-3.8.0-26-generic N/A
linux-firmware 1.106
RfKill:
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 10/28/2011
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 3027
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: Crosshair IV Formula
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3027:bd10/28/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnCrosshairIVFormula:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1199366/+subscriptions