kernel-packages team mailing list archive

Thread
Date
[Bug 1542957] [NEW] SCSI failed | boot failed | APCI complained

To: kernel-packages@xxxxxxxxxxxxxxxxxxx
From: markling <1542957@xxxxxxxxxxxxxxxxxx>
Date: Sun, 07 Feb 2016 23:30:28 -0000
Reply-to: Bug 1542957 <1542957@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
Public bug reported:

SCSI stopped working. Machine locks on boot. It was fine before.

What should happen: machine boosts, scsi interface enabled
What does happen: machine fails to boot, acpi reports problems

Boot messages [edited]:

ACPI PCC Probe Failed
Starting Version 219

Worker[139] /devices/pci000:00 ... etc 
SCSI timing out command, waited 82s
... devices/pci .... timeout kill it
... seq 987 /devices/pci killed
... INFO: task systemd-udevd:139 blocked for more than 120 seconds
module len 27812 truncated
INFO: task sh blocked for more than 120 seconds
INFO: task alsactl:468 blocked for more than 120 seconds
INFO: task apparmor: 474 blocked for more than 120 seconds

and so on.

Here's what looks like a relevant section from kern.log:

Feb  7 22:08:58 zammo kernel: [   10.846041] scsi host4: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
Feb  7 22:08:58 zammo kernel: [   10.846041]         <Adaptec aic7850 SCSI adapter>
Feb  7 22:08:58 zammo kernel: [   10.846041]         aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
Feb  7 22:08:58 zammo kernel: [   10.846041] 
Feb  7 22:08:58 zammo kernel: [   60.535354] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Feb  7 22:08:58 zammo kernel: [   64.555112] lp: driver loaded but no devices found
Feb  7 22:08:58 zammo kernel: [   64.638863] ppdev: user-space parallel port driver
Feb  7 22:08:58 zammo kernel: [   64.724900] parport_pc 00:03: reported by Plug and Play ACPI
Feb  7 22:08:58 zammo kernel: [   64.724948] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
Feb  7 22:08:58 zammo kernel: [   64.807286] lp0: using parport0 (interrupt-driven).
Feb  7 22:08:58 zammo kernel: [   70.374056] intel_rng: Firmware space is locked read-only. If you can't or
Feb  7 22:08:58 zammo kernel: [   70.374056] intel_rng: don't want to disable this in firmware setup, and if
Feb  7 22:08:58 zammo kernel: [   70.374056] intel_rng: you are certain that your system has a functional
Feb  7 22:08:58 zammo kernel: [   70.374056] intel_rng: RNG, try using the 'no_fwh_detect' option.
Feb  7 22:08:58 zammo kernel: [   70.387710] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb  7 22:08:58 zammo kernel: [   70.505366] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x000000000000082a-0x000000000000082a (\GIC3) (20141107/utaddress-258)
Feb  7 22:08:58 zammo kernel: [   70.505380] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x000000000000082b-0x000000000000082b (\GIC2) (20141107/utaddress-258)
Feb  7 22:08:58 zammo kernel: [   70.505389] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000828-0x000000000000082d (\GLBC) (20141107/utaddress-258)
Feb  7 22:08:58 zammo kernel: [   70.505398] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x000000000000082a-0x000000000000082a (\SACT) (20141107/utaddress-258)
Feb  7 22:08:58 zammo kernel: [   70.505405] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20141107/utaddress-258)
Feb  7 22:08:58 zammo kernel: [   70.505413] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Feb  7 22:08:58 zammo kernel: [   70.505419] ACPI Warning: SystemIO range 0x00000000000008b0-0x00000000000008bf conflicts with OpRegion 0x00000000000008b8-0x00000000000008b8 (\GHI0) (20141107/utaddress-258)
Feb  7 22:08:58 zammo kernel: [   70.505427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Feb  7 22:08:58 zammo kernel: [   70.505432] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008af conflicts with OpRegion 0x000000000000088e-0x000000000000088e (\GIC1) (20141107/utaddress-258)
Feb  7 22:08:58 zammo kernel: [   70.505441] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Feb  7 22:08:58 zammo kernel: [   70.505445] lpc_ich: Resource conflict(s) found affecting gpio_ich

--------------------------------------
Description:	Ubuntu 15.04
Release:	15.04
--------------------------------------

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: acpi boot pci scsi systemio

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1542957

Title:
  SCSI failed |  boot failed |  APCI complained

Status in linux package in Ubuntu:
  New

Bug description:
  SCSI stopped working. Machine locks on boot. It was fine before.

  What should happen: machine boosts, scsi interface enabled
  What does happen: machine fails to boot, acpi reports problems

  Boot messages [edited]:

  ACPI PCC Probe Failed
  Starting Version 219

  Worker[139] /devices/pci000:00 ... etc 
  SCSI timing out command, waited 82s
  ... devices/pci .... timeout kill it
  ... seq 987 /devices/pci killed
  ... INFO: task systemd-udevd:139 blocked for more than 120 seconds
  module len 27812 truncated
  INFO: task sh blocked for more than 120 seconds
  INFO: task alsactl:468 blocked for more than 120 seconds
  INFO: task apparmor: 474 blocked for more than 120 seconds

  and so on.

  Here's what looks like a relevant section from kern.log:

  Feb  7 22:08:58 zammo kernel: [   10.846041] scsi host4: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
  Feb  7 22:08:58 zammo kernel: [   10.846041]         <Adaptec aic7850 SCSI adapter>
  Feb  7 22:08:58 zammo kernel: [   10.846041]         aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
  Feb  7 22:08:58 zammo kernel: [   10.846041] 
  Feb  7 22:08:58 zammo kernel: [   60.535354] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
  Feb  7 22:08:58 zammo kernel: [   64.555112] lp: driver loaded but no devices found
  Feb  7 22:08:58 zammo kernel: [   64.638863] ppdev: user-space parallel port driver
  Feb  7 22:08:58 zammo kernel: [   64.724900] parport_pc 00:03: reported by Plug and Play ACPI
  Feb  7 22:08:58 zammo kernel: [   64.724948] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
  Feb  7 22:08:58 zammo kernel: [   64.807286] lp0: using parport0 (interrupt-driven).
  Feb  7 22:08:58 zammo kernel: [   70.374056] intel_rng: Firmware space is locked read-only. If you can't or
  Feb  7 22:08:58 zammo kernel: [   70.374056] intel_rng: don't want to disable this in firmware setup, and if
  Feb  7 22:08:58 zammo kernel: [   70.374056] intel_rng: you are certain that your system has a functional
  Feb  7 22:08:58 zammo kernel: [   70.374056] intel_rng: RNG, try using the 'no_fwh_detect' option.
  Feb  7 22:08:58 zammo kernel: [   70.387710] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  Feb  7 22:08:58 zammo kernel: [   70.505366] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x000000000000082a-0x000000000000082a (\GIC3) (20141107/utaddress-258)
  Feb  7 22:08:58 zammo kernel: [   70.505380] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x000000000000082b-0x000000000000082b (\GIC2) (20141107/utaddress-258)
  Feb  7 22:08:58 zammo kernel: [   70.505389] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000828-0x000000000000082d (\GLBC) (20141107/utaddress-258)
  Feb  7 22:08:58 zammo kernel: [   70.505398] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x000000000000082a-0x000000000000082a (\SACT) (20141107/utaddress-258)
  Feb  7 22:08:58 zammo kernel: [   70.505405] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20141107/utaddress-258)
  Feb  7 22:08:58 zammo kernel: [   70.505413] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  Feb  7 22:08:58 zammo kernel: [   70.505419] ACPI Warning: SystemIO range 0x00000000000008b0-0x00000000000008bf conflicts with OpRegion 0x00000000000008b8-0x00000000000008b8 (\GHI0) (20141107/utaddress-258)
  Feb  7 22:08:58 zammo kernel: [   70.505427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  Feb  7 22:08:58 zammo kernel: [   70.505432] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008af conflicts with OpRegion 0x000000000000088e-0x000000000000088e (\GIC1) (20141107/utaddress-258)
  Feb  7 22:08:58 zammo kernel: [   70.505441] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  Feb  7 22:08:58 zammo kernel: [   70.505445] lpc_ich: Resource conflict(s) found affecting gpio_ich

  --------------------------------------
  Description:	Ubuntu 15.04
  Release:	15.04
  --------------------------------------

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1542957/+subscriptions
Follow ups

[Bug 1542957] Re: SCSI failed | boot failed | APCI complained
From: Launchpad Bug Tracker, 2016-04-12
[Bug 1542957] Re: SCSI failed | boot failed | APCI complained
From: Christopher M. Penalver, 2016-02-11
[Bug 1542957] Re: SCSI failed | boot failed | APCI complained
From: Joseph Salisbury, 2016-02-11
[Bug 1542957] Re: SCSI failed | boot failed | APCI complained
From: markling, 2016-02-08
[Bug 1542957] Missing required logs.
From: Brad Figg, 2016-02-08