← Back to team overview

kernel-packages team mailing list archive

[Bug 1547153] Re: /sys/class/scsi_host/hostN/partition_number and .../mad_version showing up BE on LE Ubuntu. (ibmvscsi)

 

This bug was fixed in the package linux - 4.4.0-8.23

---------------
linux (4.4.0-8.23) xenial; urgency=low

  * cgroup namespace mounts broken in containers (LP: #1549398)
    - SAUCE: kernfs: Always set super block owner to init_user_ns

  * 4.4.0-7.22 no longer boots on arm64 (LP: #1547718)
    - arm64: mm: avoid calling apply_to_page_range on empty range
    - UBUNTU SAUCE: arm: mm: avoid calling apply_to_page_range on empty range

  * kernel install failed /bin/cp: cannot stat ‘/boot/initrd.img-4.3.0-7-generic’: No such file or directory (LP: #1536810)
    - [Config] postinst -- handle recreating symlinks when a real file is present

  * insecure overlayfs xattrs handling in copy_up (LP: #1534961)
    - SAUCE: cred: Add clone_cred() interface
    - SAUCE: overlayfs: Use mounter's credentials instead of selectively raising caps
    - SAUCE: overlayfs: Skip permission checking for trusted.overlayfs.* xattrs
    - SAUCE: overlayfs: Be more careful about copying up sxid files
    - SAUCE: overlayfs: Propogate nosuid from lower and upper mounts

  * overlayfs over fuse should refuse copy_up of files if uid/gid not mapped (LP: #1535150)
    - SAUCE: cred: Add clone_cred() interface
    - SAUCE: overlayfs: Use mounter's credentials instead of selectively raising caps
    - SAUCE: overlayfs: Skip permission checking for trusted.overlayfs.* xattrs
    - SAUCE: overlayfs: Be more careful about copying up sxid files
    - SAUCE: overlayfs: Propogate nosuid from lower and upper mounts

  * overlay: mkdir fails if directory exists in lowerdir in a user namespace (LP: #1531747)
    - SAUCE: cred: Add clone_cred() interface
    - SAUCE: overlayfs: Use mounter's credentials instead of selectively raising caps
    - SAUCE: overlayfs: Skip permission checking for trusted.overlayfs.* xattrs

  * Update Intel ethernet drivers to Fortville SW5 (LP: #1547674)
    - net: bulk free infrastructure for NAPI context, use napi_consume_skb
    - net: Add eth_platform_get_mac_address() helper.
    - i40e: Add mac_filter_element at the end of the list instead of HEAD
    - i40e/i40evf: Fix RSS rx-flow-hash configuration through ethtool
    - i40e: Replace X722 mac check in ethtool get_settings
    - i40evf: allow channel bonding of VFs
    - i40e: define function capabilities in only one place
    - i40evf: null out ring pointers on free
    - i40e: Cleanup the code with respect to restarting autoneg
    - i40e: update features with right offload
    - i40e: bump version to 1.4.10
    - i40e: add new device IDs for X722
    - i40e: Extend ethtool RSS hooks for X722
    - i40e/i40evf: Fix for UDP/TCP RSS for X722
    - i40evf: add new write-back mode
    - i40e/i40evf: Use private workqueue
    - i40e: add new proxy-wol bit for X722
    - i40e: Limit DCB FW version checks to X710/XL710 devices
    - i40e: AQ Add Run PHY Activity struct
    - i40e: AQ Geneve cloud tunnel type
    - i40e: AQ Add external power class to get link status
    - i40e: add 100Mb ethtool reporting
    - ixgbe: bulk free SKBs during TX completion cleanup cycle
    - igb: Remove unnecessary flag setting in igb_set_flag_queue_pairs()
    - igb: Unpair the queues when changing the number of queues
    - igb/igbvf: don't give up
    - igb: clean up code for setting MAC address
    - igb: Refactor VFTA configuration
    - igb: Allow asymmetric configuration of MTU versus Rx frame size
    - igb: Do not factor VLANs into RLPML calculation
    - igb: Always enable VLAN 0 even if 8021q is not loaded
    - igb: Merge VLVF configuration into igb_vfta_set
    - igb: Clean-up configuration of VF port VLANs
    - igb: Add support for VLAN promiscuous with SR-IOV and NTUPLE
    - igb: Drop unnecessary checks in transmit path
    - igb: Enable use of "bridge fdb add" to set unicast table entries
    - igb: Add workaround for VLAN tag stripping on 82576
    - i40e: AQ Shared resource flags
    - i40e: AQ Add set_switch_config
    - i40e: AQ Add VXLAN-GPE tunnel type
    - i40e: AQ thermal sensor control struct
    - i40e: Bump AQ minor version to 1.5 for new FW features
    - i40e: Store lan_vsi_idx and lan_vsi_id in the right size
    - i40e: fix write-back-on-itr to work with legacy itr
    - i40e: add counter for arq overflows
    - i40e: add 20G speed for Tx bandwidth calculations
    - i40e: refactor DCB function
    - i40e: add a little more to an NVM update debug message
    - i40evf: enable bus master after reset
    - i40e: add netdev info to VSI dump
    - i40e: remove VF device IDs from PF
    - i40e: trivial: remove unnecessary local var
    - i40e/i40evf: Bump i40e to 1.4.11 and i40evf to 1.4.7
    - net: ixgbe: add minimal parser details for ixgbe
    - i40e: trivial: drop duplicate definition
    - i40e: trivial: fix missing space
    - i40e: fix bug in dma sync
    - i40e: do TSO only if CHECKSUM_PARTIAL is set
    - i40e: allocate memory safer
    - i40e: fix: do not sleep in netdev_ops
    - i40e: APIs to Add/remove port mirroring rules
    - i40e: negate PHY int mask bits
    - i40e: drop unused function
    - i40e: count allocation errors
    - i40e: avoid large memcpy by assigning struct
    - i40e/i40evf: bump version to 1.4.12/1.4.8
    - i40e: Enable Geneve offload for FW API ver > 1.4 for XL710/X710 devices
    - i40e: add priv flag for automatic rule eviction
    - i40e: use eth_platform_get_mac_address()
    - i40e: move sync_vsi_filters up in service_task
    - i40e: Make the DCB firmware checks for X710/XL710 only
    - i40e: set shared bit for multicast filters
    - i40e: add VEB stat control and remove L2 cloud filter
    - i40e: use new add_veb calling with VEB stats control
    - i40e: Refactor force_wb and WB_ON_ITR functionality code
    - i40evf: Change vf driver string to reflect all products i40evf supports
    - i40e/i40evf: don't lose interrupts
    - i40e/i40evf: try again after failure
    - i40e: dump descriptor indexes in hex
    - i40e/i40evf: use __GFP_NOWARN
    - i40e/i40evf: use pages correctly in Rx
    - i40e/i40evf: use logical operators, not bitwise
    - i40e: properly show packet split status in debugfs
    - i40e/i40evf: Bump version
    - ixgbe: use u32 instead of __u32 in model header
    - ixgbe: fix dates on header of ixgbe_model.h
    - i40e: get rid of magic number
    - i40e: drop unused debugfs file "dump"
    - i40evf: support packet split receive
    - i40e: trivial: cleanup use of pf->hw
    - i40e: Add a SW workaround for lost interrupts
    - i40e: Fix PROMISC mode for Multi-function per port (MFP) devices
    - i40e: Removal of code which relies on BASE VEB SEID
    - i40e/i40evf: avoid atomics
    - i40e: Do not disable queues in the Legacy/MSI Interrupt handler
    - i40e: expand comment
    - i40e: better error reporting for nvmupdate
    - i40evf: set adapter state on reset failure
    - i40e: clean event descriptor before use
    - i40e: When in promisc mode apply promisc mode to Tx Traffic as well
    - i40e/i40evf: Bump i40e to 1.4.15 and i40evf to 1.4.11.
    - i40e/i40evf: Drop outer checksum offload that was not requested
    - i40e/i40evf: Use u64 values instead of casting them in TSO function
    - i40e/i40evf: Factor out L4 header and checksum from L3 bits in TSO path
    - i40e/i40evf: Consolidate all header changes into TSO function
    - i40e/i40evf: Replace header pointers with unions of pointers in Tx checksum path
    - i40e/i40evf: Add support for IPv4 encapsulated in IPv6
    - i40e/i40evf: Handle IPv6 extension headers in checksum offload
    - i40e/i40evf: Do not write to descriptor unless we complete
    - i40e/i40evf: Add exception handling for Tx checksum
    - i40e/i40evf: Clean-up Rx packet checksum handling
    - i40e/i40evf: Enable support for SKB_GSO_UDP_TUNNEL_CSUM
    - i40e: Fix ATR in relation to tunnels
    - i40e: Do not drop support for IPv6 VXLAN or GENEVE tunnels
    - i40e: Update feature flags to reflect newly enabled features
    - i40evf: Update feature flags to reflect newly enabled features
    - i40e: Add support for ATR w/ IPv6 extension headers
    - i40e/i40evf: Break up xmit_descriptor_count from maybe_stop_tx
    - i40e/i40evf: Rewrite logic for 8 descriptor per packet check
    - i40e/i40evf: Move Tx checksum closer to TSO
    - i40e: Add functions to blink led on 10GBaseT PHY
    - i40e: Fix led blink capability for 10GBaseT PHY
    - i40e: Increase timeout when checking GLGEN_RSTAT_DEVSTATE bit
    - i40e: Do not wait for Rx queue disable in DCB reconfig
    - i40e: Fix for unexpected messaging
    - i40e: Expose some registers to program parser, FD and RSS logic
    - i40e: add check for null VSI
    - i40e: add adminq commands for Rx CTL registers
    - i40e: implement and use Rx CTL helper functions
    - i40e: Use the new rx ctl register helpers. Don't use AQ calls from clear_hw.
    - i40e: suspend scheduling during driver unload
    - i40e: let go of the past
    - i40e/i40evf: Bump i40e to 1.4.25 and i40evf to 1.4.15

  * MPT3SAS Driver update for next kernel release (LP: #1512221)
    - mpt3sas: A correction in unmap_resources
    - mpt3sas: Added support for high port count HBA variants.
    - mpt3sas: Used IEEE SGL instead of MPI SGL while framing a SMP Passthrough request message.
    - mpt3sas: Fix static analyzer(coverity) tool identified defects
    - mpt3sas: Never block the Enclosure device
    - mpt3sas: Make use of additional HighPriority credit message frames for sending SCSI IO's
    - mpt3sas: Added smp_affinity_enable module parameter.
    - mpt3sas: Add support for configurable Chain Frame Size
    - mpt3sas: Updated MPI Header to 2.00.42
    - mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of timedout IO.
    - mpt3sas: Updating mpt3sas driver version to 12.100.00.00
    - mpt3sas: Remove cpumask_clear for zalloc_cpumask_var and don't free free_cpu_mask_var before reply_q

  * /sys/class/scsi_host/hostN/partition_number and .../mad_version showing up BE on LE Ubuntu. (ibmvscsi) (LP: #1547153)
    - ibmvscsi: Add endian conversions to sysfs attribute show functions

  * Miscellaneous Ubuntu changes
    - [Packaging] git-ubuntu-log -- output should be utf-8
    - [Packaging] git-ubuntu-log -- handle invalid or private bugs

 -- Andy Whitcroft <apw@xxxxxxxxxxxxx>  Wed, 24 Feb 2016 20:34:49 +0000

** Changed in: linux (Ubuntu Xenial)
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1547153

Title:
  /sys/class/scsi_host/hostN/partition_number and .../mad_version
  showing up BE on LE Ubuntu. (ibmvscsi)

Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Xenial:
  Fix Released

Bug description:
  == Comment: #0 - ERIC P. FRIED <efried@xxxxxxxxxx> - 2015-06-15 18:29:28 ==
  ---Problem Description---
  /sys/class/scsi_host/host0/partition_number and .../mad_version showing up BE on LE Ubuntu.
   
  ---uname output---
  Linux neo34 3.19.0-10-generic #10-Ubuntu SMP Mon Mar 23 16:18:35 UTC 2015 ppc64le ppc64le ppc64le GNU/Linux
   
  ---Additional Hardware Info---
  Dual VIOS, Ubuntu partition is full virtual. 

   
  ---Patches Installed---
  VMC device driver for Neo project.  Ask Steve Royer (seroyer@us) if it matters.
   
  Machine Type = type_model=8247-22L 
   
  ---Debugger---
  A debugger is not configured
   
  ---Steps to Reproduce---
   neo@neo34:/sys/class/scsi_disk$ cat /sys/module/ibmvscsi/drivers/vio\:ibmvscsi/30000006/host1/scsi_host/host1/partition_number 
  50331648
  neo@neo34:/sys/class/scsi_disk$ cat /sys/module/ibmvscsi/drivers/vio\:ibmvscsi/30000006/host1/scsi_host/host1/mad_version 
  16777216

  Turns out these numbers are really big-endian versions of their real values.
  In [60]: print("0x%x" % 50331648)
  0x3000000

  The actual partition ID of host1 is 3.
  neo@neo34:/sys/class/scsi_disk$ lssyscfg -r lpar -F lpar_id --filter lpar_names=vios2
  3

   
  Userspace tool common name: Not sure what this means.  Use 'cat' to reproduce the bug. 
   
  The userspace tool has the following bit modes: ? 

  Userspace rpm: Not sure what this means either.  And I'm on Ubuntu, no
  RPMs.

  Userspace tool obtained from project website:  na 
   
  *Additional Instructions for Eric Fried/efried@xxxxxxxxxx  Brian King/bjking1@xxxxxxxxxx: 
  -Post a private note with access information to the machine that the bug is occuring on.
  -Attach ltrace and strace of userspace application.

  == Comment: #1 - TYREL N. DATWYLER <tyreld@xxxxxxxxxx> - 2016-02-17 17:46:17 ==
  Fix has been submitted upstream:

  https://lkml.org/lkml/2016/2/10/792

  == Comment: #2 - TYREL N. DATWYLER <tyreld@xxxxxxxxxx> - 2016-02-18 12:19:18 ==
  Fix has been accepted upstream into Martin Petersen's 4.6/scsi-queue branch.

  http://git.kernel.org/cgit/linux/kernel/git/mkp/scsi.git/commit/?h=4.6
  /scsi-queue&id=f9e3de0d6053ae89828188291a405c64d8d95a0e

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1547153/+subscriptions