kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #165371
[Bug 1550300] Re: hp C7000 and bl460c gen 8 - Virtual Fan issue
ric_da_inf, in order to allow additional upstream developers to examine the issue, at your earliest convenience, could you please test the latest upstream kernel available from http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D ? Please keep in mind the following:
1) The one to test is at the very top line at the top of the page (not the daily folder).
2) The release names are irrelevant.
3) The folder time stamps aren't indicative of when the kernel actually was released upstream.
4) Install instructions are available at https://wiki.ubuntu.com/Kernel/MainlineBuilds .
If testing on your main install would be inconvenient, one may:
1) Install Ubuntu to a different partition and then test this there.
2) Backup, or clone the primary install.
If the latest kernel did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this issue is fixed in the mainline kernel, please add the following tags by clicking on the yellow circle with a black pencil icon, next to the word Tags, located at the bottom of the report description:
kernel-fixed-upstream
kernel-fixed-upstream-X.Y-rcZ
Where X, and Y are the first two numbers of the kernel version, and Z is
the release candidate number if it exists.
If the mainline kernel does not fix the issue, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-X.Y-rcZ
Please note, an error to install the kernel does not fit the criteria of
kernel-bug-exists-upstream.
Also, you don't need to apport-collect further unless specifically
requested to do so.
Once testing of the latest upstream kernel is complete, please mark this
report Status Confirmed. Please let us know your results.
Thank you for your understanding.
** Tags added: latest-bios
** Changed in: linux (Ubuntu)
Importance: Low => Medium
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1550300
Title:
hp C7000 and bl460c gen 8 - Virtual Fan issue
Status in linux package in Ubuntu:
Incomplete
Bug description:
Hi,
i installed system ubuntu 12.04.5 on a c7000 of type bl460c gen 8.
After machine is started up it stroke Virtual Fan of chassis to 100% of cpu.
Installing sensors i detect only temperature, not any type of fun :
root@lastline-engine:~/apport# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +8.3�C (crit = +31.3�C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +33.0�C (high = +85.0�C, crit = +95.0�C)
Core 0: +31.0�C (high = +85.0�C, crit = +95.0�C)
Core 1: +31.0�C (high = +85.0�C, crit = +95.0�C)
Core 2: +31.0�C (high = +85.0�C, crit = +95.0�C)
Core 3: +32.0�C (high = +85.0�C, crit = +95.0�C)
Core 4: +33.0�C (high = +85.0�C, crit = +95.0�C)
Core 8: +32.0�C (high = +85.0�C, crit = +95.0�C)
Core 9: +30.0�C (high = +85.0�C, crit = +95.0�C)
Core 10: +30.0�C (high = +85.0�C, crit = +95.0�C)
Core 11: +32.0�C (high = +85.0�C, crit = +95.0�C)
Core 12: +31.0�C (high = +85.0�C, crit = +95.0�C)
coretemp-isa-0001
Adapter: ISA adapter
Physical id 1: +34.0�C (high = +85.0�C, crit = +95.0�C)
Core 0: +31.0�C (high = +85.0�C, crit = +95.0�C)
Core 1: +31.0�C (high = +85.0�C, crit = +95.0�C)
Core 2: +28.0�C (high = +85.0�C, crit = +95.0�C)
Core 3: +27.0�C (high = +85.0�C, crit = +95.0�C)
Core 4: +30.0�C (high = +85.0�C, crit = +95.0�C)
Core 8: +32.0�C (high = +85.0�C, crit = +95.0�C)
Core 9: +34.0�C (high = +85.0�C, crit = +95.0�C)
Core 10: +32.0�C (high = +85.0�C, crit = +95.0�C)
Core 11: +31.0�C (high = +85.0�C, crit = +95.0�C)
Core 12: +31.0�C (high = +85.0�C, crit = +95.0�C)
cooling device seems attached but cannot view them :
root@lastline-engine:~/apport# more /sys/class/thermal/cooling_device*/cur_state
::::::::::::::
/sys/class/thermal/cooling_device0/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device10/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device11/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device12/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device13/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device14/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device15/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device16/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device17/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device18/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device19/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device1/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device20/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device21/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device22/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device23/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device24/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device25/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device26/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device27/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device28/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device29/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device2/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device30/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device31/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device32/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device33/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device34/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device35/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device36/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device37/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device38/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device39/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device3/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device40/cur_state
::::::::::::::
-1
::::::::::::::
/sys/class/thermal/cooling_device4/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device5/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device6/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device7/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device8/cur_state
::::::::::::::
0
::::::::::::::
/sys/class/thermal/cooling_device9/cur_state
::::::::::::::
0
I also try with boot with "rescue mode" with same 12.04.5 iso boot disk and all seems good, no problem appears.
---
AlsaDevices:
total 0
crw-rw---T 1 root audio 116, 1 mar 2 14:28 seq
crw-rw---T 1 root audio 116, 33 mar 2 14:28 timer
AplayDevices: Error: [Errno 2] No such file or directory
ApportVersion: 2.0.1-0ubuntu5
Architecture: amd64
ArecordDevices: Error: [Errno 2] No such file or directory
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
CRDA: Error: [Errno 2] No such file or directory
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=c18dc311-7c52-4cbe-b4b8-f357932d48a3
InstallationMedia: Lastline Engine (rev. 702-3367)
IwConfig: Error: [Errno 2] No such file or directory
MachineType: HP ProLiant BL460c Gen8
Package: linux (not installed)
PciMultimedia:
ProcFB:
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/lastline--engine--vg-root ro nosplash nomodeset ipv6.disable=1 nomsi
ProcVersionSignature: Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4
RelatedPackageVersions:
linux-restricted-modules-3.13.0-32-generic N/A
linux-backports-modules-3.13.0-32-generic N/A
linux-firmware 1.79.16
RfKill: Error: [Errno 2] No such file or directory
Tags: precise
Uname: Linux 3.13.0-32-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:
WifiSyslog:
dmi.bios.date: 06/01/2015
dmi.bios.vendor: HP
dmi.bios.version: I31
dmi.chassis.type: 28
dmi.chassis.vendor: HP
dmi.modalias: dmi:bvnHP:bvrI31:bd06/01/2015:svnHP:pnProLiantBL460cGen8:pvr:cvnHP:ct28:cvr:
dmi.product.name: ProLiant BL460c Gen8
dmi.sys.vendor: HP
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1550300/+subscriptions
References
