kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #166308
[Bug 1511534] Re: [Hyper-V] Fibre Channel multipath error message
** Also affects: linux (Ubuntu Xenial)
Importance: Medium
Status: Triaged
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1511534
Title:
[Hyper-V] Fibre Channel multipath error message
Status in linux package in Ubuntu:
Triaged
Status in linux source package in Wily:
Triaged
Status in linux source package in Xenial:
Triaged
Bug description:
Problem statement:
Wily (and probably other previous releases with the updated kernels) return a multipath error for vFC (virtual Fibre Channel).
Symptoms:
The following messages are in the dmesg log during booting:
device-mapper: table: 252:4: multipath: error getting device
device-mapper: IOCtl: error adding target to table
After logging in, run the command: multipath -ll
The multipath command does not return any errors, and no new messages
are added to the dmesg log or syslog after running the multipath
command.
Steps to repro
============
Tested with the released Wily (15.10), kernel 4.2.0-16-generic.
1. Create a Wily VM.
2. Boot and install the multipath-tools package.
3. Shutdown and attach a Virtual Fiber Channel adapter and connect it to a virtual SAN.
Note: The host must have a Fiber Channel adapter. Use Hyper-V managers Virtual SAN Manager to create a Virtual Fiber Channel Storage Area Network.
4. Boot the VM.
5. Issue the following command to see any errors were reported during the boot.
dmesg | grep -i error
You should see the following two error:
device-mapper: table: 252:4: multipath: error getting device
device-mapper: IOCtl: error adding target to table
Otherwise, the vFC disks are usable and show no issues at a use test
case.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1511534/+subscriptions
References