← Back to team overview

kernel-packages team mailing list archive

[Bug 1556471] JournalErrors.txt

 

apport information

** Attachment added: "JournalErrors.txt"
   https://bugs.launchpad.net/bugs/1556471/+attachment/4597144/+files/JournalErrors.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1556471

Title:
  Connecting an Osprey 2 Mini (USB cellular wireless router) sometimes
  causes an endless reset loop or a kernel panic

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce (happens > 50% of the time, but not every time):

  Turn on an Osprey 2 Mini

  Connect it to a USB port via a USB cable while both the device and
  computer are on (i.e. hotplug)

  Observed symptoms:
  - sometimes the Osprey 2 Mini goes into an endless reset loop (visible as the LEDs on the front of the device flashing rapidly), being reset approximately every 200ms; on such occasions, the Ubuntu user interface often reacts as though I'd inserted an audio CD containing corrupted data (e.g. via repeteadly adding an "Audio CD" icon to the launcher and then removing it, and putting up dialog boxes complaining about failure to read the data)
  - sometimes the kernel panics (often some time after the reset loop starts, perhaps up to 10 seconds); when this happens there was always or nearly always a reset loop occurring beforehand
  - sometimes the device resets once or not at all, then works as expected (showing up as a network interface, and allowing me to communicate to the Internet with a wired connection); I'm currently using an Osprey 2 Mini for this purpose right now

  I haven't been able to gain much information about the source of the
  kernel panics, as they lock up the entire system (forcing a hard power
  off). Alt-Sysrq commands don't work in this state (even though I have
  them enabled), and sometimes the Caps Lock light flashes repeatedly,
  both signs of a panic. The logs end some time before the panic occurs;
  presumably the panic means that the log file is never written to disk.

  Looking at my logs retrospectively, here's an interesting/relevant
  portion of /var/log/syslog:

  Mar 11 20:37:04 tundra kernel: [20656.424192] usb 3-1.2: new high-speed USB device number 3 using ehci-pci
  Mar 11 20:37:04 tundra kernel: [20656.549351] usb 3-1.2: New USB device found, idVendor=1bbb, idProduct=f000
  Mar 11 20:37:04 tundra kernel: [20656.549362] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  Mar 11 20:37:04 tundra kernel: [20656.549367] usb 3-1.2: Product: MobileBroadBand
  Mar 11 20:37:04 tundra kernel: [20656.549371] usb 3-1.2: Manufacturer: Alcatel
  Mar 11 20:37:04 tundra kernel: [20656.549375] usb 3-1.2: SerialNumber: 0123456789ABCDEF
  Mar 11 20:37:02 tundra gnome-session[5167]: message repeated 19 times: [ log_kalarm:]
  Mar 11 20:37:05 tundra mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2"
  Mar 11 20:37:05 tundra mtp-probe: bus: 3, device: 3 was not an MTP device
  Mar 11 20:37:05 tundra systemd[1]: Created slice system-usb_modeswitch.slice.
  Mar 11 20:37:05 tundra systemd[1]: Starting USB_ModeSwitch_3-1.2...
  Mar 11 20:37:05 tundra usb_modeswitch_dispatcher[11944]: Could not read attribute: No such file or directory
  Mar 11 20:37:05 tundra kernel: [20657.479875] usb-storage 3-1.2:1.0: USB Mass Storage device detected
  Mar 11 20:37:05 tundra kernel: [20657.480088] scsi host6: usb-storage 3-1.2:1.0
  Mar 11 20:37:05 tundra kernel: [20657.480291] usbcore: registered new interface driver usb-storage
  Mar 11 20:37:05 tundra kernel: [20657.528383] usbcore: registered new interface driver uas
  Mar 11 20:37:06 tundra kernel: [20658.481811] scsi 6:0:0:0: Direct-Access     ONETOUCH LINK4            2.31 PQ: 0 ANSI: 2
  Mar 11 20:37:06 tundra kernel: [20658.482801] scsi 6:0:0:1: CD-ROM            ONETOUCH LINK4            2.31 PQ: 0 ANSI: 2
  Mar 11 20:37:06 tundra kernel: [20658.483902] sd 6:0:0:0: Attached scsi generic sg2 type 0
  Mar 11 20:37:06 tundra kernel: [20658.495442] sr 6:0:0:1: [sr1] scsi-1 drive
  Mar 11 20:37:06 tundra kernel: [20658.496665] sr 6:0:0:1: Attached scsi CD-ROM sr1
  Mar 11 20:37:06 tundra kernel: [20658.496740] sd 6:0:0:0: [sdb] Attached SCSI removable disk
  Mar 11 20:37:06 tundra kernel: [20658.496914] sr 6:0:0:1: Attached scsi generic sg3 type 5
  Mar 11 20:37:06 tundra kernel: [20658.587460] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci
  Mar 11 20:37:07 tundra kernel: [20658.795437] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci
  Mar 11 20:37:07 tundra kernel: [20658.999352] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci
  Mar 11 20:37:07 tundra kernel: [20659.207280] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci
  Mar 11 20:37:05 tundra usb_modeswitch_dispatcher[11944]: message repeated 2 times: [ Could not read attribute: No such file or directory]
  Mar 11 20:37:07 tundra usb_modeswitch_dispatcher[11944]: Error: could not get description string "serial number"
  Mar 11 20:37:07 tundra usb_modeswitch: switch device 1bbb:f000 on 003/003
  Mar 11 20:37:07 tundra kernel: [20659.328319] scsi 6:0:0:0: rejecting I/O to offline device
  Mar 11 20:37:07 tundra kernel: [20659.328412] scsi 6:0:0:0: killing request
  Mar 11 20:37:13 tundra systemd-udevd[11969]: inotify_add_watch(9, /dev/sdb, 10) failed: No such file or directory
  Mar 11 20:37:13 tundra kernel: [20665.683553] usb 3-1.2: USB disconnect, device number 3
  Mar 11 20:37:14 tundra kernel: [20665.881104] usb 3-1.2: new high-speed USB device number 4 using ehci-pci
  Mar 11 20:37:14 tundra kernel: [20665.995273] usb 3-1.2: New USB device found, idVendor=1bbb, idProduct=0195
  Mar 11 20:37:14 tundra kernel: [20665.995280] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  Mar 11 20:37:14 tundra kernel: [20665.995284] usb 3-1.2: Product: MobileBroadBand
  Mar 11 20:37:14 tundra kernel: [20665.995286] usb 3-1.2: Manufacturer: Alcatel
  Mar 11 20:37:14 tundra kernel: [20665.995289] usb 3-1.2: SerialNumber: 0123456789ABCDEF
  Mar 11 20:37:14 tundra kernel: [20666.017853] usb-storage 3-1.2:1.2: USB Mass Storage device detected
  Mar 11 20:37:14 tundra kernel: [20666.018314] scsi host7: usb-storage 3-1.2:1.2
  Mar 11 20:37:13 tundra systemd-udevd[11969]: message repeated 3 times: [ inotify_add_watch(9, /dev/sdb, 10) failed: No such file or directory]
  Mar 11 20:37:14 tundra mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2"
  Mar 11 20:37:14 tundra mtp-probe: bus: 3, device: 4 was not an MTP device
  Mar 11 20:37:14 tundra kernel: [20666.244421] usbcore: registered new interface driver cdc_ether
  Mar 11 20:37:14 tundra NetworkManager[2492]: <warn>  (usb0): failed to find device 4 'usb0' with udev
  Mar 11 20:37:14 tundra kernel: [20666.303099] rndis_host 3-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1a.0-1.2, RNDIS device, 46:c4:64:00:d0:da
  Mar 11 20:37:14 tundra kernel: [20666.303379] usbcore: registered new interface driver rndis_host
  Mar 11 20:37:14 tundra usb_modeswitch[11944]: usb_modeswitch: switched to 1bbb:0195 on 3/4
  Mar 11 20:37:14 tundra laptop-mode: Laptop mode
  Mar 11 20:37:14 tundra laptop-mode: enabled, not active
  Mar 11 20:37:14 tundra kernel: [20666.597851] rndis_host 3-1.2:1.0 enx46c46400d0da: renamed from usb0
  Mar 11 20:37:15 tundra laptop-mode: Laptop mode
  Mar 11 20:37:15 tundra laptop-mode: enabled, not active
  Mar 11 20:37:15 tundra kernel: [20667.018355] scsi 7:0:0:0: Direct-Access     ONETOUCH LINK4            2.31 PQ: 0 ANSI: 2
  Mar 11 20:37:15 tundra kernel: [20667.019463] sd 7:0:0:0: Attached scsi generic sg2 type 0
  Mar 11 20:37:15 tundra kernel: [20667.025108] sd 7:0:0:0: [sdb] Attached SCSI removable disk
  Mar 11 20:37:15 tundra usb_modeswitch_dispatcher[11944]: Unable to open bind list file: No such file or directory
  Mar 11 20:37:15 tundra NetworkManager[2492]: <info>  (usb0): new Ethernet device (carrier: OFF, driver: 'rndis_host', ifindex: 4)
  Mar 11 20:37:15 tundra kernel: [20667.647210] usbcore: registered new interface driver usbserial
  Mar 11 20:37:15 tundra kernel: [20667.647263] usbcore: registered new interface driver usbserial_generic
  Mar 11 20:37:15 tundra kernel: [20667.647293] usbserial: USB Serial support registered for generic
  Mar 11 20:37:16 tundra kernel: [20667.830369] usbcore: registered new interface driver option
  Mar 11 20:37:16 tundra kernel: [20667.830470] usbserial: USB Serial support registered for GSM modem (1-port)
  Mar 11 20:37:16 tundra usb_modeswitch[11944]: usb_modeswitch: add device ID 1bbb:0195 to driver option
  Mar 11 20:37:16 tundra usb_modeswitch[11944]: usb_modeswitch: please report the device ID to the Linux USB developers!
  Mar 11 20:37:16 tundra NetworkManager[2492]: <info>  devices added (path: /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/net/enx46c46400d0da, iface: enx46c46400d0da)
  Mar 11 20:37:16 tundra NetworkManager[2492]: <info>  device added (path: /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/net/enx46c46400d0da, iface: enx46c46400d0da): no ifupdown configuration found.
  Mar 11 20:37:16 tundra kernel: [20667.906599] IPv6: ADDRCONF(NETDEV_UP): enx46c46400d0da: link is not ready

  The reset loops also occurred when I was using Ubuntu vivid. The
  kernel panics (which identify Linux as the broken package, as no user
  action should cause it to panic) only happened after an upgrade to
  wily.

  I couldn't get ubuntu-bug to work (after gathering information,
  nothing visibly happens and it has no windows on screen), and thus
  filed this bug report manually. Output of lsusb -v is attached. Here's
  the output of the other relevant commands.

  $ cat /proc/version_signature 
  Ubuntu 4.2.0-32.37-generic 4.2.8-ckt4

  $ lsb_release -rd
  Description:	Ubuntu 15.10
  Release:	15.10

  $ apt-cache policy linux-signed-image-4.2.0-32-generic 
  linux-signed-image-4.2.0-32-generic:
    Installed: 4.2.0-32.37
    Candidate: 4.2.0-32.37
    Version table:
   *** 4.2.0-32.37 0
          100 /var/lib/dpkg/status

  $ sudo lspci -vnvn
  00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
  	Latency: 0
  	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
  	Kernel driver in use: ivb_uncore

  00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
  	DeviceName: Intel(R) Graphics 4000
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 27
  	Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M]
  	Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
  	Region 4: I/O ports at 5000 [size=64]
  	Expansion ROM at <unassigned> [disabled]
  	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  		Address: fee0f00c  Data: 4152
  	Capabilities: [d0] Power Management version 2
  		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [a4] PCI Advanced Features
  		AFCap: TP+ FLR+
  		AFCtrl: FLR-
  		AFStatus: TP-
  	Kernel driver in use: i915

  00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 24
  	Region 0: Memory at c2600000 (64-bit, non-prefetchable) [size=64K]
  	Capabilities: [70] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
  		Address: 00000000fee0c00c  Data: 41c1
  	Kernel driver in use: xhci_hcd

  00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 28
  	Region 0: Memory at c2614000 (64-bit, non-prefetchable) [size=16]
  	Capabilities: [50] Power Management version 3
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee0f00c  Data: 4162
  	Kernel driver in use: mei_me

  00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 16
  	Region 0: Memory at c2619000 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
  	Capabilities: [58] Debug port: BAR=1 offset=00a0
  	Capabilities: [98] PCI Advanced Features
  		AFCap: TP+ FLR+
  		AFCtrl: FLR-
  		AFStatus: TP-
  	Kernel driver in use: ehci-pci

  00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 29
  	Region 0: Memory at c2610000 (64-bit, non-prefetchable) [size=16K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee0f00c  Data: 4182
  	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  	Capabilities: [100 v1] Virtual Channel
  		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
  		Arb:	Fixed- WRR32- WRR64- WRR128-
  		Ctrl:	ArbSelect=Fixed
  		Status:	InProgress-
  		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
  			Status:	NegoPending- InProgress-
  		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=22
  			Status:	NegoPending- InProgress-
  	Capabilities: [130 v1] Root Complex Link
  		Desc:	PortNumber=0f ComponentID=00 EltType=Config
  		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
  			Addr:	00000000fed1c000
  	Kernel driver in use: snd_hda_intel

  00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 17
  	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
  	I/O behind bridge: 00004000-00004fff
  	Memory behind bridge: c2500000-c25fffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE+
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
  			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
  		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  			Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  			Changed: MRL- PresDet- LinkState+
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  		Address: 00000000  Data: 0000
  	Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: pcieport

  00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin B routed to IRQ 16
  	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
  	I/O behind bridge: 00003000-00003fff
  	Memory behind bridge: c2400000-c24fffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE+
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
  			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
  		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  			Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  			Changed: MRL- PresDet- LinkState+
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  		Address: 00000000  Data: 0000
  	Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: pcieport

  00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin C routed to IRQ 18
  	Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
  	I/O behind bridge: 00002000-00002fff
  	Memory behind bridge: c1000000-c1ffffff
  	Prefetchable memory behind bridge: 00000000c0000000-00000000c0ffffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE+
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
  			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
  		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
  			Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
  			Changed: MRL- PresDet- LinkState+
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  		Address: 00000000  Data: 0000
  	Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: pcieport

  00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 20
  	Region 0: Memory at c2618000 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [58] Debug port: BAR=1 offset=00a0
  	Capabilities: [98] PCI Advanced Features
  		AFCap: TP+ FLR+
  		AFCtrl: FLR-
  		AFStatus: TP-
  	Kernel driver in use: ehci-pci

  00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
  	Kernel driver in use: lpc_ich

  00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 26
  	Region 0: I/O ports at 5088 [size=8]
  	Region 1: I/O ports at 5094 [size=4]
  	Region 2: I/O ports at 5080 [size=8]
  	Region 3: I/O ports at 5090 [size=4]
  	Region 4: I/O ports at 5060 [size=32]
  	Region 5: Memory at c2617000 (32-bit, non-prefetchable) [size=2K]
  	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  		Address: fee0300c  Data: 4142
  	Capabilities: [70] Power Management version 3
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
  	Capabilities: [b0] PCI Advanced Features
  		AFCap: TP+ FLR+
  		AFCtrl: FLR-
  		AFStatus: TP-
  	Kernel driver in use: ahci

  00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Interrupt: pin C routed to IRQ 0
  	Region 0: Memory at c2615000 (64-bit, non-prefetchable) [size=256]
  	Region 4: I/O ports at 5040 [size=32]

  01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01)
  	DeviceName: Realtek 802.11 b/g/n w/ *2 antennas
  	Subsystem: Hewlett-Packard Company Device [103c:197d]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 30
  	Region 0: I/O ports at 4000 [size=256]
  	Region 2: Memory at c2500000 (64-bit, non-prefetchable) [size=16K]
  	Capabilities: [40] Power Management version 3
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee0800c  Data: 4192
  	Capabilities: [70] Express (v2) Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
  			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 512 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
  			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
  		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Via message/WAKE#
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled
  		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [100 v1] Advanced Error Reporting
  		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap+ ChkEn-
  	Capabilities: [140 v1] Device Serial Number 00-e0-4c-ff-fe-81-91-01
  	Capabilities: [150 v1] Latency Tolerance Reporting
  		Max snoop latency: 0ns
  		Max no snoop latency: 0ns
  	Kernel driver in use: rtl8188ee

  02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
  	DeviceName: Realtek PCIe FE Family Controller
  	Subsystem: Hewlett-Packard Company Device [103c:2186]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 25
  	Region 0: I/O ports at 3000 [size=256]
  	Region 2: Memory at c2404000 (64-bit, prefetchable) [size=4K]
  	Region 4: Memory at c2400000 (64-bit, prefetchable) [size=16K]
  	Expansion ROM at c2410000 [disabled] [size=64K]
  	Capabilities: [40] Power Management version 3
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee0f00c  Data: 41e1
  	Capabilities: [70] Express (v2) Endpoint, MSI 01
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
  			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 512 bytes
  		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
  			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
  		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via message/WAKE#
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
  		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
  		Vector table: BAR=4 offset=00000000
  		PBA: BAR=4 offset=00000800
  	Capabilities: [d0] Vital Product Data
  		No end tag found
  	Capabilities: [100 v1] Advanced Error Reporting
  		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  		CESta:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
  	Capabilities: [140 v1] Virtual Channel
  		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
  		Arb:	Fixed- WRR32- WRR64- WRR128-
  		Ctrl:	ArbSelect=Fixed
  		Status:	InProgress-
  		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  			Status:	NegoPending- InProgress-
  	Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
  	Capabilities: [170 v1] Latency Tolerance Reporting
  		Max snoop latency: 0ns
  		Max no snoop latency: 0ns
  	Kernel driver in use: r8169
  --- 
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  ais523     6233 F.... pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.10
  HibernationDevice: RESUME=UUID=bfbc4bf8-2e40-4799-bbef-9c5044c87007
  InstallationDate: Installed on 2014-06-03 (648 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-32-generic.efi.signed root=UUID=e92d655d-cf36-4d45-90e7-30a0f9d0949e ro quiet splash
  ProcVersionSignature: Ubuntu 4.2.0-32.37-generic 4.2.8-ckt4
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-32-generic N/A
   linux-backports-modules-4.2.0-32-generic  N/A
   linux-firmware                            1.149.3
  RfKill:
   0: phy0: Wireless LAN
   	Soft blocked: no
   	Hard blocked: no
  Tags:  wily
  Uname: Linux 4.2.0-32-generic x86_64
  UpgradeStatus: Upgraded to wily on 2016-02-18 (22 days ago)
  UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo wireshark
  _MarkForUpload: True
  dmi.bios.date: 12/04/2013
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.42
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 2186
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 35.12
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: dmi:bvnInsyde:bvrF.42:bd12/04/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr098B110000404100000620180:rvnHewlett-Packard:rn2186:rvr35.12:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion 15 Notebook PC
  dmi.product.version: 098B110000404100000620180
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1556471/+subscriptions


References