← Back to team overview

kernel-packages team mailing list archive

[Bug 1563375] Re: A a single PCI read or write appears twice on the PCIe bus. This happens when using the SR-IOV feature with Cavium's liquidIO card

 

I was also able to reproduce the bug with the 4.4.0-8 kernel.  This
specific kernel is listed in the notes as not to having the bug, but I
am able to reproduce it with this version.  Again, I am testing these
kernels on a 14.04.4 Trusty installation, which may indicate a userspace
issue.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1563375

Title:
  A a single PCI read or write appears twice on the PCIe bus. This
  happens when using the SR-IOV feature with  Cavium's liquidIO card

Status in linux package in Ubuntu:
  In Progress

Bug description:
  Cavium engineers are testing  SR-IOV feature with  Cavium's new
  liquidIO card (based on OCTEON processor running as an intelligent
  NIC) on x86 Dell servers and ran into the issue described below.

  They are *not* seeing this issue on  Intel 82599 NIC.

  So far, they have seen this on multiple Dell servers - T5810  & Dell
  T630 (x86 - Ubuntu certified).

  We are testing a Cavium OCTEON device in EP mode with SRIOV.  With a
  CentOS7 VM running on the Ubuntu 14.04.2 host (using VFIO) we see that
  a single PCI read or write transaction targeting the device’s BAR0
  issued from the VM appears twice on the PCIe bus. The same accesses
  work fine when the VF is accessed directly from the Ubuntu 14.04.2
  host. These BAR0 PCI accesses do not require a driver on the VM side.
  We can reproduce the problem using a simple user-space application to
  access the VF’s BAR0 registers.

  We do not see this problem when the VM runs within a CentOS 7 host or
  under a Ubuntu 12.04 host. This appears specific to Ubuntu 14.04
  release. Appreciate your help in any clues or pointers to this
  behavior.

  This issue is also not happening with 16.04 beta.

  Steps to reproduce the bug with pcimem:

  Read:
  ./pcimem /sys/bus/pci/devices/0000\:04\:00.0/resource0 0x10080 d

  Write:
  ./pcimem /sys/bus/pci/devices/0000\:04\:00.0/resource0 0x10080 d 2048

  Read again:
  ./pcimem /sys/bus/pci/devices/0000\:04\:00.0/resource0 0x10080 d

  The value of SLIST_BAOFF_DBELL should be the same for the first read
  and the second read, after the write.

  If the bug is hit, the second read will report a value of double
  instead of the same.

  The register should have read back the same value that was written.
  The register acts like an adder in that every write adds to the
  previously written value minus anything the device has consumed. We
  see that the second read returns double the value written in the
  single write. We captured a PCIe trace and found that each of the PCI
  operation accessing this register is seen twice on the PCI bus. The 2
  writes cause the register value to double which has implications for
  normal operation. The PCIe trace is attached and has markers to
  identify the relevant transactions.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1563375/+subscriptions


References