kernel-packages team mailing list archive
Mailing list archive
[Bug 1561830] Re: Hard disk writes fail in 16.04 daily on nForce 430
I have now finished bisecting the mainline kernel, and this is the
commit that causes this problem:
Author: Christoph Hellwig <hch@xxxxxx>
Date: Thu Oct 8 09:28:04 2015 +0100
scsi: use host wide tags by default
This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags. We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Acked-by: Jens Axboe <axboe@xxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: James Bottomley <JBottomley@xxxxxxxx>
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
Hard disk writes fail in 16.04 daily on nForce 430
Status in linux package in Ubuntu:
I have an old PC I use for testing new operating systems. It has
previously had Ubuntu 15.10 installed and working. The motherboard is
an Asus M2NPV-VM, with Nvidia nForce 430 chipset and Nvidia GeForce
6150 GPU. I have installed an Nvidia GT220 card to use for more
modern video support.
When I attempt to install Ubuntu 16.04 beta (daily xenial-desktop-
amd64.iso file downloaded 24/03/2016 18:17), it starts to write to
the hard disk (Samsung HD103UJ), and after a short time the install
got lots of disk write errors in kern.log. After the errors, the disk
was unable to be read either, with "fdisk -l /dev/sda" failing to read
a sector, where it had worked before starting the install. Unplugging
the SATA cable to the drive and plugging it in again made the drive
work again (on /dev/sdc), but another attempt to install failed with
the same write errors.
I noticed that the log had swap write errors also, so I rebooted the
install DVD again, and this time did a "swapoff -a" command before
attempting to install, but got the same errors again. So I found my
Ubuntu 15.10 install DVD and tried a new install from that, which
worked just fine.
On rebooting with my 16.04 daily DVD, I again did "swapoff -a" so that
the DVD based system would run normally, then tried mounting the EXT4
system partition I had just installed using the 15.10 install DVD.
That worked, so I tried dd commands to do test writes to that
partition. The following commands worked:
dd if=/dev/zero of=/mnt/sda8/tmp/output bs=8k count=10k
dd if=/dev/zero of=/mnt/sda8/tmp/output bs=8k count=100k
but when I did this command:
dd if=/dev/zero of=/mnt/sda8/tmp/output bs=8k count=1000k
after a while errors started appearing in kern.log, just as with the
attempts to install 16.04.
It appears that with sustained write activity, the errors will start
and then the drive will become unusable until it is unplugged and
plugged in again.
I have attached the kern.log and syslog files from the 15.10 install
that worked, and the 16.04 install attempt that failed. The first
error message appears to be this:
ata3: EH in SWNCQ mode,QC:qc_active 0x1FFF sactive 0x1FFF
ata3: SWNCQ:qc_active 0x1 defer_bits 0x1FFE last_issue_tag 0x0
dhfis 0x1 dmafis 0x0 sdbfis 0x0
which leads me to suspect a problem with the handling of the SATA controller's interrupts.
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 2233 F.... pulseaudio
/dev/snd/controlC1: ubuntu 2233 F.... pulseaudio
DistroRelease: Ubuntu 16.04
enp0s20 no wireless extensions.
lo no wireless extensions.
enp2s9 no wireless extensions.
LiveMediaBuild: Ubuntu 16.04 LTS "Xenial Xerus" - Beta amd64 (20160323)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0458:0118 KYE Systems Corp. (Mouse Systems)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: System manufacturer System Product Name
Package: linux (not installed)
PATH=(custom, no user)
ProcFB: 0 nouveaufb
ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet splash ---
ProcVersionSignature: Ubuntu 4.4.0-15.31-generic 4.4.6
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
Uname: Linux 4.4.0-15-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.vendor: Phoenix Technologies, LTD
dmi.bios.version: ASUS M2NPV-VM ACPI BIOS Revision 1401
dmi.board.vendor: ASUSTek Computer INC.
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer
To manage notifications about this bug go to: