← Back to team overview

kernel-packages team mailing list archive

[Bug 1579410] Re: Cannot suspend or hybernate HP ProLiant SE316M1R2

 

Did this issue start happening after an update/upgrade?  Was there a
prior kernel version where you were not having this particular problem?

Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v4.6 kernel[0].

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

Once testing of the upstream kernel is complete, please mark this bug as
"Confirmed".


Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6-rc7-wily/

** Changed in: linux (Ubuntu)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1579410

Title:
  Cannot suspend or hybernate HP ProLiant SE316M1R2

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  pm-suspend, pm-hybernate does not work on HP ProLiant SE316M1R2
  system.

  I am not sure if hardware actually supports that though, but there is
  kernel crash (see syslog.txt attached with Call Trace) which maybe is
  the cause.

  Monitor goes off for few seconds but after that system resumes and
  works as before.

  Also, some interesting lines:

  May  7 20:58:23 tomashp-server kernel: [ 4374.025981] pci_legacy_suspend(): hpsa_suspend+0x0/0x10 [hpsa] returns -38
  May  7 20:58:23 tomashp-server kernel: [ 4374.025986] dpm_run_callback(): pci_pm_freeze+0x0/0xe0 returns -38
  May  7 20:58:23 tomashp-server kernel: [ 4374.025987] PM: Device 0000:06:00.0 failed to freeze async: error -38s2disks

  These lines also appears when using s2disk.

  s2ram gives:

  KMS graphics driver is in use, skipping quirks.
  s2ram_do: Invalid argument

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-generic 4.4.0.21.22
  ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6
  Uname: Linux 4.4.0-21-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
  CurrentDesktop: XFCE
  Date: Sat May  7 20:55:52 2016
  HibernationDevice: RESUME=UUID=2f75ed7f-85b4-4d1f-abd5-04d88f7c8be3
  InstallationDate: Installed on 2015-10-12 (208 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  IwConfig:
   eth0      no wireless extensions.
   
   eth1      no wireless extensions.
   
   lo        no wireless extensions.
  MachineType: HP ProLiant SE316M1R2
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=4d4fc552-1b5c-42b8-8829-9249646d798c ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-21-generic N/A
   linux-backports-modules-4.4.0-21-generic  N/A
   linux-firmware                            1.157
  RfKill:
   
  SourcePackage: linux
  UpgradeStatus: Upgraded to xenial on 2016-04-21 (15 days ago)
  dmi.bios.date: 07/02/2013
  dmi.bios.vendor: HP
  dmi.bios.version: R02
  dmi.chassis.type: 23
  dmi.chassis.vendor: HP
  dmi.modalias: dmi:bvnHP:bvrR02:bd07/02/2013:svnHP:pnProLiantSE316M1R2:pvr:cvnHP:ct23:cvr:
  dmi.product.name: ProLiant SE316M1R2
  dmi.sys.vendor: HP

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1579410/+subscriptions


References