← Back to team overview

kernel-packages team mailing list archive

[Bug 1576953] Re: 8086:153a e1000e driver failed with error -3

 

** Description changed:

  When I switch on my laptop, running Ubuntu 16.04 LTS amd64,  it will
  boot and load e1000e, but no eth* interface is present. Even repeated
  rmmod and modprobe don't bring up the interface. After a reboot (i.e. no
  fresh power-up) it works just fine. After the next power-cycle the
  problem is there again. Laptop is a Clevo W130SV, network card is Intel
  I217-LM (rev 05).
  
- Same symptoms as in
- https://bugs.launchpad.net/ubuntu/+source/linux/+bug/984404
+ Upstream report:
+ http://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20160516/005431.html
  
-  dmesg | grep e1000e
+  dmesg | grep e1000e
  [    0.985539] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  [    0.985541] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  [    0.985710] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  [    1.979369] e1000e: probe of 0000:00:19.0 failed with error -3
  
  On warm reboot, last line is gone.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.4.0-21-generic 4.4.0-21.37
  ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6
  Uname: Linux 4.4.0-21-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
-  USER        PID ACCESS COMMAND
-  /dev/snd/controlC0:  diego      2235 F.... pulseaudio
-  /dev/snd/controlC1:  diego      2235 F.... pulseaudio
+  USER        PID ACCESS COMMAND
+  /dev/snd/controlC0:  diego      2235 F.... pulseaudio
+  /dev/snd/controlC1:  diego      2235 F.... pulseaudio
  CurrentDesktop: XFCE
  Date: Sat Apr 30 11:24:15 2016
  HibernationDevice: RESUME=UUID=1c631208-0b9d-4ea8-b00c-42463325399c
  MachineType: TEKNO SERVICE SL W130SV
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=011e1a79-9a2b-47d7-a20c-c1b362ffd636 ro splash quiet vt.handoff=7
  RelatedPackageVersions:
-  linux-restricted-modules-4.4.0-21-generic N/A
-  linux-backports-modules-4.4.0-21-generic  N/A
-  linux-firmware                            1.157
+  linux-restricted-modules-4.4.0-21-generic N/A
+  linux-backports-modules-4.4.0-21-generic  N/A
+  linux-firmware                            1.157
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/21/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: W130SV
  dmi.board.vendor: Notebook
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: No Enclosure
  dmi.chassis.version: N/A
  dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd08/21/2014:svnTEKNOSERVICESL:pnW130SV:pvrNotApplicable:rvnNotebook:rnW130SV:rvrNotApplicable:cvnNoEnclosure:ct10:cvrN/A:
  dmi.product.name: W130SV
  dmi.product.version: Not Applicable
  dmi.sys.vendor: TEKNO SERVICE SL

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1576953

Title:
  8086:153a e1000e driver failed with error -3

Status in linux package in Ubuntu:
  Triaged

Bug description:
  When I switch on my laptop, running Ubuntu 16.04 LTS amd64,  it will
  boot and load e1000e, but no eth* interface is present. Even repeated
  rmmod and modprobe don't bring up the interface. After a reboot (i.e.
  no fresh power-up) it works just fine. After the next power-cycle the
  problem is there again. Laptop is a Clevo W130SV, network card is
  Intel I217-LM (rev 05).

  Upstream report:
  http://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20160516/005431.html

   dmesg | grep e1000e
  [    0.985539] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  [    0.985541] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  [    0.985710] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  [    1.979369] e1000e: probe of 0000:00:19.0 failed with error -3

  On warm reboot, last line is gone.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.4.0-21-generic 4.4.0-21.37
  ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6
  Uname: Linux 4.4.0-21-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  diego      2235 F.... pulseaudio
   /dev/snd/controlC1:  diego      2235 F.... pulseaudio
  CurrentDesktop: XFCE
  Date: Sat Apr 30 11:24:15 2016
  HibernationDevice: RESUME=UUID=1c631208-0b9d-4ea8-b00c-42463325399c
  MachineType: TEKNO SERVICE SL W130SV
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=011e1a79-9a2b-47d7-a20c-c1b362ffd636 ro splash quiet vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-21-generic N/A
   linux-backports-modules-4.4.0-21-generic  N/A
   linux-firmware                            1.157
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/21/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: W130SV
  dmi.board.vendor: Notebook
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: No Enclosure
  dmi.chassis.version: N/A
  dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd08/21/2014:svnTEKNOSERVICESL:pnW130SV:pvrNotApplicable:rvnNotebook:rnW130SV:rvrNotApplicable:cvnNoEnclosure:ct10:cvrN/A:
  dmi.product.name: W130SV
  dmi.product.version: Not Applicable
  dmi.sys.vendor: TEKNO SERVICE SL

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1576953/+subscriptions


References