kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #181988
[Bug 1588467] ProcCpuinfo.txt
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1588467/+attachment/4676379/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1588467
Title:
Mount USB3 KEY of 64 Go
Status in linux package in Ubuntu:
Confirmed
Bug description:
New question #293348 on Ubuntu:
https://answers.launchpad.net/ubuntu/+question/293348
Bonjour. / Hello.
Je peux utiliser ma clé USB3 sur un port USB3 avec windows mais pas avec ubuntu 16.04 sauf à y mettre un prolongateur usb2.
I use my “USB3-key on a USB3 port with Windows but not with ubuntu 16.04 except to put a USB2 extender.
u1604btrfs@u1604btrfs:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"
u1604btrfs@u1604btrfs:~$
La clé USB3 de 64 GO connectée directement à un port USB3 n’a aucun problème avec windows10 avec un débit moyen de 42 MB/s.
The USB3 64GB connected directly to a USB3 port was no problem with Windows 10 with an average throughput of 42 MB / s.
La clé USB3 de 64 GO connectée via un càble USB de prolongation (20 cm) à un port USB3 fonctionne avec un débit moyen de 26 MB/s avec ubuntu.
The USB3 64GB connected via an extension USB cable (20 cm) to a USB3 port works with an average throughput of 26 MB / s with ubuntu.
Un disque USB3 connecté à ce même port USB3 fonctionne avec un débit moyen de 106 MB/s avec ubuntu,
A USB3 drive connected to the same USB3 port works with an average throughput of 106 MB / s with ubuntu.
La clé USB3 de 64 GO connectée directement à un port USB3 ne se monte pas avec ubuntu, Je pense à un problème logiciel. Merci de votre avis.
The USB 3 64GB connected directly to a USB3 port does not go up with ubuntu. I think to a software problem, Thanks for your review,
Trace DMESG du branchement direct.
Trace DMESG direct connection.
[15027.934173] usb 3-1: USB disconnect, device number 3
[15113.908384] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[15113.949359] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[15113.949370] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15113.949377] usb 4-1: Product: DataTraveler 3.0
[15113.949387] usb 4-1: Manufacturer: Kingston
[15113.949395] usb 4-1: SerialNumber: 60A44C426697FE50C98100E8
[15118.948235] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.951961] usb 4-1: Disable of device-initiated U1 failed.
[15118.955466] usb 4-1: Disable of device-initiated U2 failed.
[15118.955474] usb-storage 4-1:1.0: USB Mass Storage device detected
[15118.955648] scsi host9: usb-storage 4-1:1.0
[15118.959180] usb 4-1: Set SEL for device-initiated U1 failed.
[15118.962661] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.962810] usb 4-1: USB disconnect, device number 3
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Trace DMESG du branchement avec un câble prolongateur.
Trace DMESG connecting with an extension cable.
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15930.041889] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[15930.248230] usb 3-1: New USB device found, idVendor=0951, idProduct=1666
[15930.248237] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15930.248241] usb 3-1: Product: DataTraveler 3.0
[15930.248244] usb 3-1: Manufacturer: Kingston
[15930.248246] usb 3-1: SerialNumber: 60A44C426697FE50C98100E8
[15930.248591] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.248610] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.249352] usb-storage 3-1:1.0: USB Mass Storage device detected
[15930.251542] scsi host10: usb-storage 3-1:1.0
[15932.447123] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 3.0 1.00 PQ: 0 ANSI: 6
[15932.447953] sd 10:0:0:0: Attached scsi generic sg2 type 0
[15932.449447] sd 10:0:0:0: [sdb] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[15932.451694] sd 10:0:0:0: [sdb] Write Protect is off
[15932.451704] sd 10:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[15932.453308] sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[15932.470160] sdb: sdb1 sdb2 sdb3 sdb4
[15932.472853] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[15933.102257] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[15933.128433] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
u1604btrfs@u1604btrfs:~$
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+subscriptions
References