kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #182490
Re: [Bug 1583288] Re: Realtek Wifi card rtl8723be [10ec:b723] WiFi not available
When I first reported this bug I made the point that my HP455 was
purchased with Ubuntu pre-installed - and it works fine as long as you
don't try to install any other Ubuntu flavour, or for that matter
anything derived from Ubuntu or Debian. I cannot even upgrade to the
latest LTS version without losing wifi. HP have clearly added
something to the code to make it work. Can the problem (which has now
been running for a couple of years now) not be solved by simply
contacting HP and asking them what it was?
Podsgrove
Sent using Hushmail
On 02/06/2016 at 7:41 PM, "Peter Ludwig" wrote:apport information
** Tags added: apport-collected rosa
** Description changed:
I am here on a HP Pavilion Laptop with beatsaudio. No Model Number -
nothing.But I have this problem on other HP (455) Notebooks too.
OS tried: OpenSuse / Kubuntu / Linux Mint Mate (card does not work
out
of the box / no scanning)
The Wifi card is: (in Germany!)
--------------------------------------
lspci -nn | grep -iA2 net
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd.
RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
--------------------------------------
I am now under kernel:
4.4.0-21-generic
I installed the newest kernel because in some threads people said
the card woule be available in the newest kernel. But this was not the
case. I mean the card is there but does not scan nor see any wifi
networks.
-------------------------------------
Before I tried everything I could find to get my wifi running but I
do
not even see one spot. So no connection at all. I even cloned git
and
compiled the driver - the compiling and installation worked fine. I
tried the old and the new driver.
By the way the BT seems to be fine - although I have not checked
cause I
do not need BT.
---------------------------------------------
Here is what I tried:
rfkill list all; hciconfig -a
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
hci0: Type: BR/EDR Bus: USB
BD Address: 2C:33:7A:3F:E4:3E ACL MTU: 820:8 SCO MTU: 255:16
UP RUNNING PSCAN
RX bytes:1327 acl:0 sco:0 events:139 errors:0
TX bytes:25058 acl:0 sco:0 commands:139 errors:0
Features: 0xff 0xff 0xff 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'mint-0'
Class: 0x740100
Service Classes: Rendering, Object Transfer, Audio, Telephony
Device Class: Computer, Uncategorized
HCI Version: 4.0 (0x6) Revision: 0xe2f
LMP Version: 4.0 (0x6) Subversion: 0x9f73
Manufacturer: Realtek Semiconductor Corporation (93)
-------------------------------------
I added the options sugested in rtl8723be.conf
options rtl8723be fwlps=0 swlps=0
But this did not help either.
--------------------------------------
lsmod reports:
rfcomm 69632 12
rtl8723be 139264 0
btcoexist 180224 1 rtl8723be
rtl_pci 40960 1 rtl8723be
rtlwifi 98304 3 btcoexist,rtl_pci,rtl8723be
hp_wmi 16384 0
mac80211 733184 3 rtl_pci,rtlwifi,rtl8723be
sparse_keymap 16384 1 hp_wmi
kvm 532480 0
irqbypass 16384 1 kvm
btusb 45056 0
crct10dif_pclmul 16384 0
btrtl 16384 1 btusb
btbcm 16384 1 btusb
...
-------------------------------------------------------
dmesg | grep rtl reports:
[ 8.982260] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b
lmp_ver=06 lmp_subver=8723
[ 8.982262] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 9.064265] rtlwifi: module verification failed: signature and/or
required key missing - tainting kernel
[ 9.403770] Using firmware rtlwifi/rtl8723befw.bin
[ 9.404023] rtlwifi: channel plan 0x20
[ 9.404027] rtlwifi: country code 11
[ 9.422483] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.423458] rtlwifi: wireless switch is on
--------------------------------------------------------
modinfo rtl8723be
filename:
/lib/modules/4.4.0-21-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rtl8723be.ko
firmware: rtlwifi/rtl8723befw.bin
description: Realtek 8723BE 802.11n PCI wireless
license: GPL
author: Realtek WlanFAE
author: PageHe
srcversion: 00619764255210776FAB54D
alias: pci:v000010ECd0000B723sv*sd*bc*sc*i*
depends: rtlwifi,rtl_pci,btcoexist,mac80211
vermagic: 4.4.0-21-generic SMP mod_unload modversions
parm: swlps:bool
parm: swenc:using hardware crypto (default 0 [hardware])
(bool)
parm: ips:using no link power save (default 1 is open)
(bool)
parm: fwlps:using linked fw control power save (default 1 is open)
(bool)
parm: msi:Set to 1 to use MSI interrupts mode (default 0)
(bool)
parm: debug:Set debug level (0-5) (default 0) (int)
parm: disable_watchdog:Set to 1 to disable the watchdog (default 0)
(bool)
parm: ant_sel:Set to 1 or 2 to force antenna number (default 0)
(int)
---------------------------------------------------------
sudo iwlist scan
wlan0 No scan results
---------------------------------------------------------
sudo iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
lo no wireless extensions.
----------------------------------------------------------
sudo ifconfig wlan0 down
sudo ifconfig wlan0 up
without errors.
----------------------------------------------------------
In my disappointment I tried this:
From https://bugzilla.kernel.org/show_bug.cgi?id=83641#c1
"There is a new version of this driver at GitHub. You will need to
have
the package with the kernel headers installed.
git clone http://github.com/lwfinger/rtlwifi_new.git
cd rtlwifi_new
make
sudo make install
This version of the driver will be submitted for inclusion in kernel
3.18. I ran it for 39 hours with no disconnects."
---------------------------------
no errors but no change.
---------------------------------
Checked this link:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1240940
---------------------------------
Then I tried several params and finally this worked somehow.
sudo modprobe -rv rtl8723be
sudo modprobe -v rtl8723be msi=1
I now was able to see wifi networks - hoorayyyy!! :)
---------------------------------------------------------
I then tried to connect to my network - but failed.
I am sitting 1 m next to my router.
-----------------------------------------------------------
dmesg:
[ 2027.454666] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST
device=00:00.1 address=0x000000fdf8080020 flags=0x0a00]
[ 2027.464903] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2051.922688] cfg80211: World regulatory domain updated:
[ 2051.922698] cfg80211: DFS Master region: unset
[ 2051.922701] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2051.922709] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.922714] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.922719] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.922723] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.922727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.963665] Using firmware rtlwifi/rtl8723befw.bin
[ 2051.963841] rtlwifi: channel plan 0x20
[ 2051.963845] rtlwifi: country code 11
[ 2051.965731] ieee80211 phy0: Selected rate control algorithm
'rtl_rc'
[ 2051.966606] rtlwifi: wireless switch is on
[ 2052.401828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2221.380867] r8169 0000:03:00.0 eth0: link down
[ 2229.644057] systemd-hostnamed[3082]: Warning: nss-myhostname is
not installed. Changing the local hostname might make it
unresolveable. Please install nss-myhostname!
[ 2254.504927] wlan0: authenticate with 58:7f:66:65:73:6c
[ 2254.933657] wlan0: send auth to 58:7f:66:65:73:6c (try 1/3)
[ 2256.065621] wlan0: send auth to 58:7f:66:65:73:6c (try 2/3)
[ 2257.065727] wlan0: send auth to 58:7f:66:65:73:6c (try 3/3)
[ 2258.089758] wlan0: authentication with 58:7f:66:65:73:6c timed
out
---------------------------------------
WORKAROUND: I changed region to Germany:
echo 'KERNEL=="regulatory*", ACTION=="change",
SUBSYSTEM=="platform", RUN+="/sbin/iw reg set DE"' | sudo tee
/etc/udev/rules.d/regulatory.rules
and then I was able to connect. My options are now:
options rtl8723be fwlps=0 swlps=0 msi=1
Now it runs perfectly! Thanks to all!!
+ ---
+ ApportVersion: 2.14.1-0ubuntu3.20
+ Architecture: amd64
+ AudioDevicesInUse:
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC1: manu 2190 F.... pulseaudio
+ /dev/snd/controlC0: manu 2190 F.... pulseaudio
+ CurrentDesktop: MATE
+ DistroRelease: Ubuntu 14.04
+ HibernationDevice: RESUME=UUID=22d6e684-67c6-4dc5-a236-967f627153c3
+ InstallationDate: Installed on 2016-05-04 (29 days ago)
+ InstallationMedia: Linux Mint 17.3 "Rosa" - Release amd64 20151128
+ MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC
+ Package: linux (not installed)
+ ProcEnviron:
+ TERM=xterm
+ PATH=(custom, no user)
+ XDG_RUNTIME_DIR=
+ LANG=de_DE.UTF-8
+ SHELL=/bin/bash
+ ProcFB: 0 radeondrmfb
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic
root=UUID=d4bd09f7-4980-4c94-8560-07cdc4e36ee4 ro quiet splash
vt.handoff=7
+ ProcVersionSignature: Ubuntu 4.4.0-21.37~14.04.1-generic 4.4.6
+ RelatedPackageVersions:
+ linux-restricted-modules-4.4.0-21-generic N/A
+ linux-backports-modules-4.4.0-21-generic N/A
+ linux-firmware 1.144+ar3012
+ Tags: rosa
+ Uname: Linux 4.4.0-21-generic x86_64
+ UpgradeStatus: No upgrade log present (probably fresh install)
+ UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
+ _MarkForUpload: True
+ dmi.bios.date: 11/21/2014
+ dmi.bios.vendor: American Megatrends Inc.
+ dmi.bios.version: F.33
+ dmi.board.asset.tag: Base Board Asset Tag
+ dmi.board.name: 2265
+ dmi.board.vendor: Hewlett-Packard
+ dmi.board.version: 72.35
+ dmi.chassis.type: 10
+ dmi.chassis.vendor: Hewlett-Packard
+ dmi.chassis.version: Chassis Version
+ dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrF.33:bd11/21/2014:svnHewlett-Packard:pnHPPavilion17NotebookPC:pvr097B120000005F00000600080:rvnHewlett-Packard:rn2265:rvr72.35:cvnHewlett-Packard:ct10:cvrChassisVersion:
+ dmi.product.name: HP Pavilion 17 Notebook PC
+ dmi.product.version: 097B120000005F00000600080
+ dmi.sys.vendor: Hewlett-Packard
** Attachment added: "AlsaInfo.txt"
https://bugs.launchpad.net/bugs/1583288/+attachment/4675411/+files/AlsaInfo.txt
--
You received this bug notification because you are subscribed to the
bug
report.
https://bugs.launchpad.net/bugs/1583288
Title:
Realtek Wifi card rtl8723be [10ec:b723] WiFi not available
Status in linux package in Ubuntu:
Incomplete
Bug description:
I am here on a HP Pavilion Laptop with beatsaudio. No Model Number -
nothing.But I have this problem on other HP (455) Notebooks too.
OS tried: OpenSuse / Kubuntu / Linux Mint Mate (card does not work
out
of the box / no scanning)
The Wifi card is: (in Germany!)
--------------------------------------
lspci -nn | grep -iA2 net
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd.
RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
--------------------------------------
I am now under kernel:
4.4.0-21-generic
I installed the newest kernel because in some threads people said
the card woule be available in the newest kernel. But this was not the
case. I mean the card is there but does not scan nor see any wifi
networks.
-------------------------------------
Before I tried everything I could find to get my wifi running but I
do
not even see one spot. So no connection at all. I even cloned git
and
compiled the driver - the compiling and installation worked fine. I
tried the old and the new driver.
By the way the BT seems to be fine - although I have not checked
cause
I do not need BT.
---------------------------------------------
Here is what I tried:
rfkill list all; hciconfig -a
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
hci0: Type: BR/EDR Bus: USB
BD Address: 2C:33:7A:3F:E4:3E ACL MTU: 820:8 SCO MTU: 255:16
UP RUNNING PSCAN
RX bytes:1327 acl:0 sco:0 events:139 errors:0
TX bytes:25058 acl:0 sco:0 commands:139 errors:0
Features: 0xff 0xff 0xff 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'mint-0'
Class: 0x740100
Service Classes: Rendering, Object Transfer, Audio, Telephony
Device Class: Computer, Uncategorized
HCI Version: 4.0 (0x6) Revision: 0xe2f
LMP Version: 4.0 (0x6) Subversion: 0x9f73
Manufacturer: Realtek Semiconductor Corporation (93)
-------------------------------------
I added the options sugested in rtl8723be.conf
options rtl8723be fwlps=0 swlps=0
But this did not help either.
--------------------------------------
lsmod reports:
rfcomm 69632 12
rtl8723be 139264 0
btcoexist 180224 1 rtl8723be
rtl_pci 40960 1 rtl8723be
rtlwifi 98304 3 btcoexist,rtl_pci,rtl8723be
hp_wmi 16384 0
mac80211 733184 3 rtl_pci,rtlwifi,rtl8723be
sparse_keymap 16384 1 hp_wmi
kvm 532480 0
irqbypass 16384 1 kvm
btusb 45056 0
crct10dif_pclmul 16384 0
btrtl 16384 1 btusb
btbcm 16384 1 btusb
...
-------------------------------------------------------
dmesg | grep rtl reports:
[ 8.982260] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b
lmp_ver=06 lmp_subver=8723
[ 8.982262] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 9.064265] rtlwifi: module verification failed: signature and/or
required key missing - tainting kernel
[ 9.403770] Using firmware rtlwifi/rtl8723befw.bin
[ 9.404023] rtlwifi: channel plan 0x20
[ 9.404027] rtlwifi: country code 11
[ 9.422483] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.423458] rtlwifi: wireless switch is on
--------------------------------------------------------
modinfo rtl8723be
filename:
/lib/modules/4.4.0-21-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rtl8723be.ko
firmware: rtlwifi/rtl8723befw.bin
description: Realtek 8723BE 802.11n PCI wireless
license: GPL
author: Realtek WlanFAE
author: PageHe
srcversion: 00619764255210776FAB54D
alias: pci:v000010ECd0000B723sv*sd*bc*sc*i*
depends: rtlwifi,rtl_pci,btcoexist,mac80211
vermagic: 4.4.0-21-generic SMP mod_unload modversions
parm: swlps:bool
parm: swenc:using hardware crypto (default 0 [hardware])
(bool)
parm: ips:using no link power save (default 1 is open)
(bool)
parm: fwlps:using linked fw control power save (default 1 is open)
(bool)
parm: msi:Set to 1 to use MSI interrupts mode (default 0)
(bool)
parm: debug:Set debug level (0-5) (default 0) (int)
parm: disable_watchdog:Set to 1 to disable the watchdog (default 0)
(bool)
parm: ant_sel:Set to 1 or 2 to force antenna number (default 0)
(int)
---------------------------------------------------------
sudo iwlist scan
wlan0 No scan results
---------------------------------------------------------
sudo iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
lo no wireless extensions.
----------------------------------------------------------
sudo ifconfig wlan0 down
sudo ifconfig wlan0 up
without errors.
----------------------------------------------------------
In my disappointment I tried this:
From https://bugzilla.kernel.org/show_bug.cgi?id=83641#c1
"There is a new version of this driver at GitHub. You will need to
have the package with the kernel headers installed.
git clone http://github.com/lwfinger/rtlwifi_new.git
cd rtlwifi_new
make
sudo make install
This version of the driver will be submitted for inclusion in kernel
3.18. I ran it for 39 hours with no disconnects."
---------------------------------
no errors but no change.
---------------------------------
Checked this link:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1240940
---------------------------------
Then I tried several params and finally this worked somehow.
sudo modprobe -rv rtl8723be
sudo modprobe -v rtl8723be msi=1
I now was able to see wifi networks - hoorayyyy!! :)
---------------------------------------------------------
I then tried to connect to my network - but failed.
I am sitting 1 m next to my router.
-----------------------------------------------------------
dmesg:
[ 2027.454666] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST
device=00:00.1 address=0x000000fdf8080020 flags=0x0a00]
[ 2027.464903] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2051.922688] cfg80211: World regulatory domain updated:
[ 2051.922698] cfg80211: DFS Master region: unset
[ 2051.922701] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2051.922709] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.922714] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.922719] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.922723] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.922727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm), (N/A)
[ 2051.963665] Using firmware rtlwifi/rtl8723befw.bin
[ 2051.963841] rtlwifi: channel plan 0x20
[ 2051.963845] rtlwifi: country code 11
[ 2051.965731] ieee80211 phy0: Selected rate control algorithm
'rtl_rc'
[ 2051.966606] rtlwifi: wireless switch is on
[ 2052.401828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2221.380867] r8169 0000:03:00.0 eth0: link down
[ 2229.644057] systemd-hostnamed[3082]: Warning: nss-myhostname is
not installed. Changing the local hostname might make it
unresolveable. Please install nss-myhostname!
[ 2254.504927] wlan0: authenticate with 58:7f:66:65:73:6c
[ 2254.933657] wlan0: send auth to 58:7f:66:65:73:6c (try 1/3)
[ 2256.065621] wlan0: send auth to 58:7f:66:65:73:6c (try 2/3)
[ 2257.065727] wlan0: send auth to 58:7f:66:65:73:6c (try 3/3)
[ 2258.089758] wlan0: authentication with 58:7f:66:65:73:6c timed
out
---------------------------------------
WORKAROUND: I changed region to Germany:
echo 'KERNEL=="regulatory*", ACTION=="change",
SUBSYSTEM=="platform", RUN+="/sbin/iw reg set DE"' | sudo tee
/etc/udev/rules.d/regulatory.rules
and then I was able to connect. My options are now:
options rtl8723be fwlps=0 swlps=0 msi=1
Now it runs perfectly! Thanks to all!!
---
ApportVersion: 2.14.1-0ubuntu3.20
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: manu 2190 F.... pulseaudio
/dev/snd/controlC0: manu 2190 F.... pulseaudio
CurrentDesktop: MATE
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=22d6e684-67c6-4dc5-a236-967f627153c3
InstallationDate: Installed on 2016-05-04 (29 days ago)
InstallationMedia: Linux Mint 17.3 "Rosa" - Release amd64 20151128
MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
XDG_RUNTIME_DIR=
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic
root=UUID=d4bd09f7-4980-4c94-8560-07cdc4e36ee4 ro quiet splash
vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-21.37~14.04.1-generic 4.4.6
RelatedPackageVersions:
linux-restricted-modules-4.4.0-21-generic N/A
linux-backports-modules-4.4.0-21-generic N/A
linux-firmware 1.144+ar3012
Tags: rosa
Uname: Linux 4.4.0-21-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 11/21/2014
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: F.33
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 2265
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 72.35
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: Chassis Version
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrF.33:bd11/21/2014:svnHewlett-Packard:pnHPPavilion17NotebookPC:pvr097B120000005F00000600080:rvnHewlett-Packard:rn2265:rvr72.35:cvnHewlett-Packard:ct10:cvrChassisVersion:
dmi.product.name: HP Pavilion 17 Notebook PC
dmi.product.version: 097B120000005F00000600080
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1583288/+subscriptions
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1583288
Title:
Realtek Wifi card rtl8723be [10ec:b723] WiFi not available
Status in linux package in Ubuntu:
Invalid
Bug description:
I am here on a HP Pavilion Laptop with beatsaudio. No Model Number -
nothing.But I have this problem on other HP (455) Notebooks too.
OS tried: OpenSuse / Kubuntu / Linux Mint Mate (card does not work out
of the box / no scanning)
The Wifi card is: (in Germany!)
--------------------------------------
lspci -nn | grep -iA2 net
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
--------------------------------------
I am now under kernel:
4.4.0-21-generic
I installed the newest kernel because in some threads people said the card woule be available in the newest kernel. But this was not the case. I mean the card is there but does not scan nor see any wifi networks.
-------------------------------------
Before I tried everything I could find to get my wifi running but I do
not even see one spot. So no connection at all. I even cloned git and
compiled the driver - the compiling and installation worked fine. I
tried the old and the new driver.
By the way the BT seems to be fine - although I have not checked cause
I do not need BT.
---------------------------------------------
Here is what I tried:
rfkill list all; hciconfig -a
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
hci0: Type: BR/EDR Bus: USB
BD Address: 2C:33:7A:3F:E4:3E ACL MTU: 820:8 SCO MTU: 255:16
UP RUNNING PSCAN
RX bytes:1327 acl:0 sco:0 events:139 errors:0
TX bytes:25058 acl:0 sco:0 commands:139 errors:0
Features: 0xff 0xff 0xff 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'mint-0'
Class: 0x740100
Service Classes: Rendering, Object Transfer, Audio, Telephony
Device Class: Computer, Uncategorized
HCI Version: 4.0 (0x6) Revision: 0xe2f
LMP Version: 4.0 (0x6) Subversion: 0x9f73
Manufacturer: Realtek Semiconductor Corporation (93)
-------------------------------------
I added the options sugested in rtl8723be.conf
options rtl8723be fwlps=0 swlps=0
But this did not help either.
--------------------------------------
lsmod reports:
rfcomm 69632 12
rtl8723be 139264 0
btcoexist 180224 1 rtl8723be
rtl_pci 40960 1 rtl8723be
rtlwifi 98304 3 btcoexist,rtl_pci,rtl8723be
hp_wmi 16384 0
mac80211 733184 3 rtl_pci,rtlwifi,rtl8723be
sparse_keymap 16384 1 hp_wmi
kvm 532480 0
irqbypass 16384 1 kvm
btusb 45056 0
crct10dif_pclmul 16384 0
btrtl 16384 1 btusb
btbcm 16384 1 btusb
...
-------------------------------------------------------
dmesg | grep rtl reports:
[ 8.982260] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 8.982262] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 9.064265] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
[ 9.403770] Using firmware rtlwifi/rtl8723befw.bin
[ 9.404023] rtlwifi: channel plan 0x20
[ 9.404027] rtlwifi: country code 11
[ 9.422483] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.423458] rtlwifi: wireless switch is on
--------------------------------------------------------
modinfo rtl8723be
filename: /lib/modules/4.4.0-21-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rtl8723be.ko
firmware: rtlwifi/rtl8723befw.bin
description: Realtek 8723BE 802.11n PCI wireless
license: GPL
author: Realtek WlanFAE <wlanfae@xxxxxxxxxxx>
author: PageHe <page_he@xxxxxxxxxxxxxx>
srcversion: 00619764255210776FAB54D
alias: pci:v000010ECd0000B723sv*sd*bc*sc*i*
depends: rtlwifi,rtl_pci,btcoexist,mac80211
vermagic: 4.4.0-21-generic SMP mod_unload modversions
parm: swlps:bool
parm: swenc:using hardware crypto (default 0 [hardware])
(bool)
parm: ips:using no link power save (default 1 is open)
(bool)
parm: fwlps:using linked fw control power save (default 1 is open)
(bool)
parm: msi:Set to 1 to use MSI interrupts mode (default 0)
(bool)
parm: debug:Set debug level (0-5) (default 0) (int)
parm: disable_watchdog:Set to 1 to disable the watchdog (default 0)
(bool)
parm: ant_sel:Set to 1 or 2 to force antenna number (default 0)
(int)
---------------------------------------------------------
sudo iwlist scan
wlan0 No scan results
---------------------------------------------------------
sudo iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
lo no wireless extensions.
----------------------------------------------------------
sudo ifconfig wlan0 down
sudo ifconfig wlan0 up
without errors.
----------------------------------------------------------
In my disappointment I tried this:
From https://bugzilla.kernel.org/show_bug.cgi?id=83641#c1
"There is a new version of this driver at GitHub. You will need to
have the package with the kernel headers installed.
git clone http://github.com/lwfinger/rtlwifi_new.git
cd rtlwifi_new
make
sudo make install
This version of the driver will be submitted for inclusion in kernel
3.18. I ran it for 39 hours with no disconnects."
---------------------------------
no errors but no change.
---------------------------------
Checked this link:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1240940
---------------------------------
Then I tried several params and finally this worked somehow.
sudo modprobe -rv rtl8723be
sudo modprobe -v rtl8723be msi=1
I now was able to see wifi networks - hoorayyyy!! :)
---------------------------------------------------------
I then tried to connect to my network - but failed.
I am sitting 1 m next to my router.
-----------------------------------------------------------
dmesg:
[ 2027.454666] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf8080020 flags=0x0a00]
[ 2027.464903] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2051.922688] cfg80211: World regulatory domain updated:
[ 2051.922698] cfg80211: DFS Master region: unset
[ 2051.922701] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2051.922709] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2051.922714] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2051.922719] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2051.922723] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2051.922727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2051.963665] Using firmware rtlwifi/rtl8723befw.bin
[ 2051.963841] rtlwifi: channel plan 0x20
[ 2051.963845] rtlwifi: country code 11
[ 2051.965731] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 2051.966606] rtlwifi: wireless switch is on
[ 2052.401828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2221.380867] r8169 0000:03:00.0 eth0: link down
[ 2229.644057] systemd-hostnamed[3082]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2254.504927] wlan0: authenticate with 58:7f:66:65:73:6c
[ 2254.933657] wlan0: send auth to 58:7f:66:65:73:6c (try 1/3)
[ 2256.065621] wlan0: send auth to 58:7f:66:65:73:6c (try 2/3)
[ 2257.065727] wlan0: send auth to 58:7f:66:65:73:6c (try 3/3)
[ 2258.089758] wlan0: authentication with 58:7f:66:65:73:6c timed out
---------------------------------------
WORKAROUND: I changed region to Germany:
echo 'KERNEL=="regulatory*", ACTION=="change", SUBSYSTEM=="platform", RUN+="/sbin/iw reg set DE"' | sudo tee /etc/udev/rules.d/regulatory.rules
and then I was able to connect. My options are now:
options rtl8723be fwlps=0 swlps=0 msi=1
Now it runs perfectly! Thanks to all!!
---
ApportVersion: 2.14.1-0ubuntu3.20
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: manu 2190 F.... pulseaudio
/dev/snd/controlC0: manu 2190 F.... pulseaudio
CurrentDesktop: MATE
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=22d6e684-67c6-4dc5-a236-967f627153c3
InstallationDate: Installed on 2016-05-04 (29 days ago)
InstallationMedia: Linux Mint 17.3 "Rosa" - Release amd64 20151128
MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=d4bd09f7-4980-4c94-8560-07cdc4e36ee4 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-21.37~14.04.1-generic 4.4.6
RelatedPackageVersions:
linux-restricted-modules-4.4.0-21-generic N/A
linux-backports-modules-4.4.0-21-generic N/A
linux-firmware 1.144+ar3012
Tags: rosa
Uname: Linux 4.4.0-21-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 11/21/2014
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: F.33
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 2265
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 72.35
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF.33:bd11/21/2014:svnHewlett-Packard:pnHPPavilion17NotebookPC:pvr097B120000005F00000600080:rvnHewlett-Packard:rn2265:rvr72.35:cvnHewlett-Packard:ct10:cvrChassisVersion:
dmi.product.name: HP Pavilion 17 Notebook PC
dmi.product.version: 097B120000005F00000600080
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1583288/+subscriptions
References
