kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #18381
[Bug 1176950] Re: package linux-headers-3.8.0-19 3.8.0-19.29 failed to install/upgrade: package linux-headers-3.8.0-19 is not ready for configuration cannot configure (current status `half-installed')
OK. Got it working. Did a ``sudo apt-get install --reinstall linux-
headers-3.8.0-30`` and now it's not showing errors anymore. :)
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1176950
Title:
package linux-headers-3.8.0-19 3.8.0-19.29 failed to install/upgrade:
package linux-headers-3.8.0-19 is not ready for configuration cannot
configure (current status `half-installed')
Status in “linux” package in Ubuntu:
Confirmed
Bug description:
Attempting to install Cinnamon resulted in error upon trying to
install linux-headers in Lubuntu 13.04. Running in latest version of
Virtualbox if that helps any.
Ubuntu 3.8.0-19.30-generic 3.8.8
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled]
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d010 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=ff:1f.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel driver in use: e1000
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d020 [size=32]
Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K]
Kernel driver in use: vboxguest
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d100 [size=256]
Region 1: I/O ports at d200 [size=64]
Kernel driver in use: snd_intel8x0
00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d240 [size=8]
Region 1: I/O ports at <ignored>
Region 2: I/O ports at d250 [size=8]
Region 3: I/O ports at <ignored>
Region 4: I/O ports at d260 [size=16]
Region 5: Memory at f0806000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000002
Kernel driver in use: ahci
ProblemType: Package
DistroRelease: Ubuntu 13.04
Package: linux-headers-3.8.0-19 3.8.0-19.29
ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8
Uname: Linux 3.8.0-19-generic x86_64
ApportVersion: 2.9.2-0ubuntu8
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: mascondante 1575 F.... lxpanel
CRDA: Error: [Errno 2] No such file or directory: 'iw'
Date: Mon May 6 10:35:00 2013
DuplicateSignature:
Processing triggers for ureadahead ...
dpkg: error processing linux-headers-3.8.0-19 (--configure):
package linux-headers-3.8.0-19 is not ready for configuration
ErrorMessage: package linux-headers-3.8.0-19 is not ready for configuration cannot configure (current status `half-installed')
HibernationDevice: RESUME=UUID=0cd38568-e2bb-47a4-859a-36a0dcca13c2
InstallationDate: Installed on 2013-05-06 (0 days ago)
InstallationMedia: Lubuntu 13.04 "Raring Ringtail" - Release amd64 (20130423.1)
IwConfig:
eth0 no wireless extensions.
lo no wireless extensions.
Lsusb:
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: innotek GmbH VirtualBox
MarkForUpload: True
PackageArchitecture: all
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-19-generic root=/dev/mapper/lubuntu--vg-root ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: grub-pc 2.00-13ubuntu3
RfKill:
SourcePackage: linux
Title: package linux-headers-3.8.0-19 3.8.0-19.29 failed to install/upgrade: package linux-headers-3.8.0-19 is not ready for configuration cannot configure (current status `half-installed')
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 12/01/2006
dmi.bios.vendor: innotek GmbH
dmi.bios.version: VirtualBox
dmi.board.name: VirtualBox
dmi.board.vendor: Oracle Corporation
dmi.board.version: 1.2
dmi.chassis.type: 1
dmi.chassis.vendor: Oracle Corporation
dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr:
dmi.product.name: VirtualBox
dmi.product.version: 1.2
dmi.sys.vendor: innotek GmbH
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1176950/+subscriptions