kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #187168
[Bug 1567602] partman for 445
Default Comment by Bridge
** Attachment added: "partman for 445"
https://bugs.launchpad.net/bugs/1567602/+attachment/4693151/+files/445_partman
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1567602
Title:
FCP devices are not detected correctly nor deterministically
Status in Release Notes for Ubuntu:
Fix Released
Status in Ubuntu on IBM z Systems:
In Progress
Status in linux package in Ubuntu:
Fix Released
Status in linux source package in Xenial:
Fix Committed
Bug description:
Release notes:
Usage of SCSI LUNs on DS8870 Storage server with μCode Bundles 87.51.xx.0 (LMC 7.7.51.xx) via NPIV enabled zfcp adaptors causes detection issues. LP #1567602 In that case do not use NPIV enabled zfcp adaptors.
Scenario:
Using Installer 432.
No DASD devices, just two FCP CHPIDs with two LUNs each (configured for NPIV), provided via parmfile.
I expect the installer to probe and detect the LUNs automatically once I enable the FCP CHPIDs.
Repeated five times, I got different results each time. Detected LUNs
vary between 2 and 4. One time 3 LUNs appear on SCSI1 and one on SCSI2
which looks especially odd to me.
Subsequent steps to create partitions and file systems in the
installer fail.
Following is one of the five cases with more details:
After enabling CHPID 192b:
~ # cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 1077493890
Vendor: IBM Model: 2107900 Rev: 1.27
Type: Direct-Access ANSI SCSI revision: 05
dmesg showing:
[ 221.738816] qdio: 0.0.192b ZFCP on SC f using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W A
[ 226.895139] scsi 0:0:0:1077493890: Direct-Access IBM 2107900 1.27 PQ: 0 ANSI: 5
[ 226.895816] sd 0:0:0:1077493890: alua: supports implicit TPGS
[ 226.896673] sd 0:0:0:1077493890: [sda] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
[ 226.897825] sd 0:0:0:1077493890: [sda] Write Protect is off
[ 226.897827] sd 0:0:0:1077493890: [sda] Mode Sense: ed 00 00 08
[ 226.898145] sd 0:0:0:1077493890: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 226.902571] sd 0:0:0:1077493890: [sda] Attached SCSI disk
[ 287.117057] sd 0:0:0:1077493890: alua: evpd inquiry failed with 30000
[ 287.117062] sd 0:0:0:1077493890: alua: Attach failed (-22)
[ 287.117064] sd 0:0:0:1077493890: failed to add device handler: -22
[ 287.147303] scsi 0:0:0:0: Unexpected response from lun 1077493890 while scanning, scan aborted
As second step, I additionally enable CHPID 196b:
~ # cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 1077493890
Vendor: IBM Model: 2107900 Rev: 1.27
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 1077493890
Vendor: IBM Model: 2107900 Rev: 1.27
Type: Direct-Access ANSI SCSI revision: 05
dmesg showing:
[ 384.277394] scsi host1: zfcp
[ 384.286516] qdio: 0.0.196b ZFCP on SC 10 using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W A
[ 385.377511] scsi 1:0:0:1077493890: Direct-Access IBM 2107900 1.27 PQ: 0 ANSI: 5
[ 385.378120] sd 1:0:0:1077493890: alua: supports implicit TPGS
[ 385.378781] sd 1:0:0:1077493890: [sdb] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
[ 385.380097] sd 1:0:0:1077493890: [sdb] Write Protect is off
[ 385.380099] sd 1:0:0:1077493890: [sdb] Mode Sense: ed 00 00 08
[ 385.380408] sd 1:0:0:1077493890: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 385.384969] sd 1:0:0:1077493890: [sdb] Attached SCSI disk
[ 446.117041] sd 1:0:0:1077493890: alua: evpd inquiry failed with 30000
[ 446.117046] sd 1:0:0:1077493890: alua: Attach failed (-22)
[ 446.117048] sd 1:0:0:1077493890: failed to add device handler: -22
[ 446.147158] scsi 1:0:0:0: Unexpected response from lun 1077493890 while scanning, scan aborted
Next, the installer warns that no disk drives were detected.
I checked this on a system (installer 445) with two NPIV enabled FCP
devices that have 4 LUNS each. I only get the first of four LUNs per
adaptor:
Apr 6 12:57:08 anna[2607]: DEBUG: retrieving zipl-installer 0.0.33ubuntu2
Apr 6 12:57:08 anna[2607]: 2016-04-06 12:57:08 URL:http://ports.ubuntu.com//pool/main/z/zipl-installer/zipl-installer_0.0.33ubuntu2_s390x.udeb [4994/4994] -> "/var/cache/anna/zipl-installer_0.0.33ubuntu2_s390x.udeb" [1]
Apr 6 12:57:09 main-menu[384]: INFO: Menu item 'driver-injection-disk-detect' selected
Apr 6 12:57:10 main-menu[384]: INFO: Menu item 'user-setup-udeb' selected
Apr 6 12:57:10 main-menu[384]: INFO: Menu item 'clock-setup' selected
Apr 6 12:57:10 main-menu[384]: INFO: Menu item 's390-dasd' selected
Apr 6 12:57:10 s390-dasd[6877]: INFO: s390-dasd: no channel found
Apr 6 12:57:10 main-menu[384]: INFO: Menu item 's390-zfcp' selected
Apr 6 12:57:10 s390-zfcp[6891]: DEBUG: DETECT: The zfcp device driver is not loaded
Apr 6 12:57:10 s390-zfcp[6891]: WARNING **: Could not open directory: /sys/bus/ccw/drivers/zfcp/: No such file or directory
Apr 6 12:57:11 main-menu[384]: INFO: Menu item 'disk-detect' selected
Apr 6 12:57:11 anna-install: Installing mmc-modules
Apr 6 12:57:11 disk-detect: insmod /lib/modules/4.4.0-17-generic/kernel/drivers/scsi/device_handler/scsi_dh_rdac.ko
Apr 6 12:57:11 disk-detect: insmod /lib/modules/4.4.0-17-generic/kernel/drivers/scsi/device_handler/scsi_dh_alua.ko
Apr 6 12:57:11 disk-detect: insmod /lib/modules/4.4.0-17-generic/kernel/drivers/scsi/device_handler/scsi_dh_hp_sw.ko
Apr 6 12:57:11 disk-detect: insmod /lib/modules/4.4.0-17-generic/kernel/drivers/scsi/device_handler/scsi_dh_emc.ko
Apr 6 12:57:11 kernel: [ 40.509881] rdac: device handler registered
Apr 6 12:57:11 kernel: [ 40.513219] alua: device handler registered
Apr 6 12:57:11 kernel: [ 40.515517] hp_sw: device handler registered
Apr 6 12:57:11 kernel: [ 40.517572] emc: device handler registered
Apr 6 12:57:11 net/hw-detect.hotplug: Detected hotpluggable network interface encf5f0
Apr 6 12:57:11 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Apr 6 12:57:11 apt-install: Queueing package udev for later installation
Apr 6 12:57:11 apt-install: Queueing package pciutils for later installation
Apr 6 12:57:12 check-missing-firmware: looking at dmesg for the first time
Apr 6 12:57:12 check-missing-firmware: saving timestamp for a later use: [ 40.517572]
Apr 6 12:57:12 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Apr 6 12:57:12 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping
Apr 6 12:57:12 check-missing-firmware: no missing firmware in loaded kernel modules
Apr 6 12:58:29 main-menu[384]: (process:6908): unknown udeb mmc-modules
Apr 6 12:58:29 main-menu[384]: INFO: Menu item 'disk-detect' succeeded but requested to be left unconfigured.
Apr 6 12:58:31 main-menu[384]: INFO: Menu item 's390-zfcp' selected
Apr 6 12:58:31 s390-zfcp[7752]: DEBUG: DETECT: Added FCP device: 0.0.1904: online=0 npiv=0
Apr 6 12:58:31 s390-zfcp[7752]: DEBUG: DETECT: Added FCP device: 0.0.1944: online=0 npiv=0
Apr 6 12:58:31 s390-zfcp[7752]: DEBUG: DETECT: Automatic LUN scanning is enabled
Apr 6 12:58:31 s390-zfcp[7752]: DEBUG: PRESEED: No preseed data available
Apr 6 12:58:40 s390-zfcp[7752]: DEBUG: SELECT: Using FCP device 0.0.1904
Apr 6 12:58:40 kernel: [ 129.591146] scsi host0: scsi_eh_0: sleeping
Apr 6 12:58:40 kernel: [ 129.591163] scsi host0: zfcp
Apr 6 12:58:40 kernel: [ 129.598187] qdio: 0.0.1904 ZFCP on SC f using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W A
Apr 6 12:58:41 s390-zfcp[7752]: DEBUG: ENABLE: Activated FCP device 0.0.1904 (npiv=1)
Apr 6 12:58:41 kernel: [ 130.873257] scsi 0:0:0:0: scsi scan: INQUIRY pass 1 length 36
Apr 6 12:58:41 kernel: [ 130.873581] scsi 0:0:0:0: scsi scan: INQUIRY successful with code 0x0
Apr 6 12:58:41 kernel: [ 130.873593] scsi 0:0:0:0: scsi scan: INQUIRY pass 2 length 164
Apr 6 12:58:41 kernel: [ 130.873802] scsi 0:0:0:0: scsi scan: INQUIRY successful with code 0x0
Apr 6 12:58:41 kernel: [ 130.873807] scsi 0:0:0:0: scsi scan: peripheral device type of 31, no device added
Apr 6 12:58:41 kernel: [ 130.874148] scsi 0:0:0:0: scsi scan: Sending REPORT LUNS to (try 0)
Apr 6 12:58:41 kernel: [ 130.875003] scsi 0:0:0:0: scsi scan: REPORT LUNS successful (try 0) result 0x0
Apr 6 12:58:41 kernel: [ 130.875005] scsi 0:0:0:0: scsi scan: REPORT LUN scan
Apr 6 12:58:41 kernel: [ 130.875176] scsi 0:0:0:1074937986: scsi scan: INQUIRY pass 1 length 36
Apr 6 12:58:41 kernel: [ 130.875395] scsi 0:0:0:1074937986: scsi scan: INQUIRY successful with code 0x0
Apr 6 12:58:41 kernel: [ 130.875399] scsi 0:0:0:1074937986: scsi scan: INQUIRY pass 2 length 164
Apr 6 12:58:41 kernel: [ 130.875608] scsi 0:0:0:1074937986: scsi scan: INQUIRY successful with code 0x0
Apr 6 12:58:41 kernel: [ 130.875613] scsi 0:0:0:1074937986: Direct-Access IBM 2107900 1.27 PQ: 0 ANSI: 5
Apr 6 12:58:41 kernel: [ 130.876181] sd 0:0:0:1074937986: alua: supports implicit TPGS
Apr 6 12:58:41 kernel: [ 130.876323] sd 0:0:0:1074937986: tag#1 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK
Apr 6 12:58:41 kernel: [ 130.876326] sd 0:0:0:1074937986: tag#1 CDB: Test Unit Ready 00 00 00 00 00 00
Apr 6 12:58:41 kernel: [ 130.876328] sd 0:0:0:1074937986: tag#1 Sense Key : Unit Attention [current]
Apr 6 12:58:41 kernel: [ 130.876333] sd 0:0:0:1074937986: tag#1 Add. Sense: Power on, reset, or bus device reset occurred
Apr 6 12:58:41 kernel: [ 130.876722] sd 0:0:0:1074937986: [sda] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
Apr 6 12:58:41 kernel: [ 130.877759] sd 0:0:0:1074937986: [sda] Write Protect is off
Apr 6 12:58:41 kernel: [ 130.877761] sd 0:0:0:1074937986: [sda] Mode Sense: ed 00 00 08
Apr 6 12:58:41 kernel: [ 130.878085] sd 0:0:0:1074937986: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 6 12:58:41 kernel: [ 130.878295] sd 0:0:0:1074937986: tag#1 Done: SUCCESS Result: hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK
Apr 6 12:58:41 kernel: [ 130.878297] sd 0:0:0:1074937986: tag#1 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
Apr 6 12:58:41 kernel: [ 130.878298] sd 0:0:0:1074937986: tag#1 Sense Key : Illegal Request [current]
Apr 6 12:58:41 kernel: [ 130.878300] sd 0:0:0:1074937986: tag#1 Add. Sense: Invalid field in cdb
Apr 6 12:58:41 kernel: [ 130.882710] sd 0:0:0:1074937986: [sda] Attached SCSI disk
Apr 6 12:58:43 s390-zfcp[7752]: DEBUG: POPULATE LUN TREE: 0.0.1904:0x50050763070845e3:0x4082401200000000 [0:0:0:1074937986]
Apr 6 12:58:43 s390-zfcp[7752]: DEBUG: WRITE CONFIG: /etc/sysconfig/hardware/config-ccw-0.0.1904
Apr 6 12:58:47 s390-zfcp[7752]: DEBUG: SELECT: Using FCP device 0.0.1944
Apr 6 12:58:47 kernel: [ 136.279385] scsi host1: scsi_eh_1: sleeping
Apr 6 12:58:47 kernel: [ 136.279396] scsi host1: zfcp
Apr 6 12:58:47 kernel: [ 136.290784] qdio: 0.0.1944 ZFCP on SC 10 using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W A
Apr 6 12:58:52 s390-zfcp[7752]: DEBUG: ENABLE: Activated FCP device 0.0.1944 (npiv=1)
Apr 6 12:58:52 kernel: [ 141.278081] scsi 1:0:0:0: scsi scan: INQUIRY pass 1 length 36
Apr 6 12:58:52 kernel: [ 141.278691] scsi 1:0:0:0: scsi scan: INQUIRY successful with code 0x0
Apr 6 12:58:52 kernel: [ 141.278698] scsi 1:0:0:0: scsi scan: INQUIRY pass 2 length 164
Apr 6 12:58:52 kernel: [ 141.278910] scsi 1:0:0:0: scsi scan: INQUIRY successful with code 0x0
Apr 6 12:58:52 kernel: [ 141.278915] scsi 1:0:0:0: scsi scan: peripheral device type of 31, no device added
Apr 6 12:58:52 kernel: [ 141.279221] scsi 1:0:0:0: scsi scan: Sending REPORT LUNS to (try 0)
Apr 6 12:58:52 kernel: [ 141.280115] scsi 1:0:0:0: scsi scan: REPORT LUNS successful (try 0) result 0x0
Apr 6 12:58:52 kernel: [ 141.280119] scsi 1:0:0:0: scsi scan: REPORT LUN scan
Apr 6 12:58:52 kernel: [ 141.280296] scsi 1:0:0:1074937986: scsi scan: INQUIRY pass 1 length 36
Apr 6 12:58:52 kernel: [ 141.280507] scsi 1:0:0:1074937986: scsi scan: INQUIRY successful with code 0x0
Apr 6 12:58:52 kernel: [ 141.280511] scsi 1:0:0:1074937986: scsi scan: INQUIRY pass 2 length 164
Apr 6 12:58:52 kernel: [ 141.280693] scsi 1:0:0:1074937986: scsi scan: INQUIRY successful with code 0x0
Apr 6 12:58:52 kernel: [ 141.280698] scsi 1:0:0:1074937986: Direct-Access IBM 2107900 1.27 PQ: 0 ANSI: 5
Apr 6 12:58:52 kernel: [ 141.281519] sd 1:0:0:1074937986: alua: supports implicit TPGS
Apr 6 12:58:52 kernel: [ 141.281798] sd 1:0:0:1074937986: tag#1 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK
Apr 6 12:58:52 kernel: [ 141.281801] sd 1:0:0:1074937986: tag#1 CDB: Test Unit Ready 00 00 00 00 00 00
Apr 6 12:58:52 kernel: [ 141.281802] sd 1:0:0:1074937986: tag#1 Sense Key : Unit Attention [current]
Apr 6 12:58:52 kernel: [ 141.281804] sd 1:0:0:1074937986: tag#1 Add. Sense: Power on, reset, or bus device reset occurred
Apr 6 12:58:52 kernel: [ 141.282130] sd 1:0:0:1074937986: [sdb] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
Apr 6 12:58:52 kernel: [ 141.283353] sd 1:0:0:1074937986: [sdb] Write Protect is off
Apr 6 12:58:52 kernel: [ 141.283355] sd 1:0:0:1074937986: [sdb] Mode Sense: ed 00 00 08
Apr 6 12:58:52 kernel: [ 141.283637] sd 1:0:0:1074937986: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 6 12:58:52 kernel: [ 141.283758] sd 1:0:0:1074937986: tag#1 Done: SUCCESS Result: hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK
Apr 6 12:58:52 kernel: [ 141.283760] sd 1:0:0:1074937986: tag#1 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
Apr 6 12:58:52 kernel: [ 141.283761] sd 1:0:0:1074937986: tag#1 Sense Key : Illegal Request [current]
Apr 6 12:58:52 kernel: [ 141.283763] sd 1:0:0:1074937986: tag#1 Add. Sense: Invalid field in cdb
Apr 6 12:58:52 kernel: [ 141.288209] sd 1:0:0:1074937986: [sdb] Attached SCSI disk
Apr 6 12:58:53 s390-zfcp[7752]: DEBUG: POPULATE LUN TREE: 0.0.1944:0x50050763071845e3:0x4082401200000000 [1:0:0:1074937986]
Apr 6 12:58:53 s390-zfcp[7752]: DEBUG: WRITE CONFIG: /etc/sysconfig/hardware/config-ccw-0.0.1944
It looks like the LUN scan is being terminated.
Kernel parms with: scsi_mod.scsi_logging_level=4605 zfcp.dbflevel=6 zfcp.dbfsize=100
Re-testing with installer version 445 + udeb packages from 2016-04-07
s390-dasd 0.0.36ubuntu1, s390-zfcp 1.0.2ubuntu1, multipath-udeb
0.5.0+git1.656f8865-5ubuntu2, disk-detect 1.117ubuntu1
Some observations:
1. With one path only, the scanning/detection of all LUNs worked deterministically and correctly (including the final re-IPL after successful installation).
2. With two paths, but without the parmfile option 'disk-detect/multipath/enable=true', the LUNs were all detected, but once for every path. I did not want to continue installation that way.
3. With two paths and with the option 'disk-detect/multipath/enable=true', the multipath program was loaded and multipathing was set up correctly. ...
4. ... installation completed fine then...
5. .... but the final re-IPL after successful installation failed. Attaching last console messages of the IPL:
6. I could also see a difference in filesystem creation time for multipath and single path:
with multipathing (2 paths)
Apr 7 15:27:33 partman: mke2fs 1.42.13 (17-May-2015)
Apr 7 15:28:34 kernel: [ 559.624851] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
without multipathing
Apr 7 15:48:17 partman: mke2fs 1.42.13 (17-May-2015)
Apr 7 15:48:50 kernel: [ 413.789054] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-release-notes/+bug/1567602/+subscriptions
