kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #19397
[Bug 1234512] Re: "ath: phy0: failed to stop TX DMA" lines pop up randomly, shutting and opening lid goes back to working system
Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v3.12 kernel[0].
If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.
If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.
If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as "Confirmed".
Thanks in advance.
[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.12-rc3-saucy/
** Changed in: linux (Ubuntu)
Importance: Undecided => Medium
** Changed in: linux (Ubuntu)
Status: Confirmed => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1234512
Title:
"ath: phy0: failed to stop TX DMA" lines pop up randomly, shutting and
opening lid goes back to working system
Status in “linux” package in Ubuntu:
Incomplete
Bug description:
I get this issue randomly when using my system (13.04 64bits on Asus
F201E, up to date with proposed repos). It started about a week ago
(not sure exactly though).
The system randomly shows a screen with lines more or less saying the
following:
ath: phy0: failed to stop TX DMA, queues=0x00... !
ath: phy0: DMA failed to stop in 10 ms AR_CR=... AR_DIAG_SW=... DMABG_7=...
ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up.
The ellipses point out variable values or strings I could not be
bothered to write down.
To get back to a working system, I just have to close the lid of my
laptop and open it again. I can then use it normally, until it happens
again.
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-31-generic 3.8.0-31.46
ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8
Uname: Linux 3.8.0-31-generic x86_64
ApportVersion: 2.9.2-0ubuntu8.4
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: chtfn 1620 F.... pulseaudio
CRDA:
country AU:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (3, 23)
(5250 - 5330 @ 40), (3, 23), DFS
(5735 - 5835 @ 40), (3, 30)
Date: Thu Oct 3 14:39:14 2013
HibernationDevice: RESUME=UUID=0a1f86e8-8fc6-454f-bcb0-d5fef3fe52f6
InstallationDate: Installed on 2013-05-13 (143 days ago)
InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
MachineType: ASUSTeK COMPUTER INC. X201EP
MarkForUpload: True
ProcEnviron:
LANGUAGE=en_AU:en
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_AU.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-31-generic root=UUID=4391c015-75c5-492f-89fd-f37f7d63b00a ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.8.0-31-generic N/A
linux-backports-modules-3.8.0-31-generic N/A
linux-firmware 1.106
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/18/2013
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: X201EP.208
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: X201EP
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX201EP.208:bd01/18/2013:svnASUSTeKCOMPUTERINC.:pnX201EP:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX201EP:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
dmi.product.name: X201EP
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1234512/+subscriptions
References