kernel-packages team mailing list archive

[ill <1147581@xxxxxxxxxxxxxxxxxx>]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
[    0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-12-generic root=UUID=08db4ae0-0d28-4bd2-a021-0b239563b339 ro rootflags=subvol=@ quiet splash modprobe.blacklist=mceusb usbcore.autosuspend=-1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfd9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfda0000-0x00000000cfdd0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfdd1000-0x00000000cfdfffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-970A-UD3/GA-970A-UD3, BIOS F6 05/30/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[    0.000000] total RAM covered: 3326M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 4M  num_reg: 4      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[    0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f4c60-0x000f4c6f] mapped at [ffff8800000f4c60]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[    0.000000]  [mem 0x12fe00000-0x12fffffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[    0.000000]  [mem 0x12c000000-0x12fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[    0.000000]  [mem 0x100000000-0x12bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcfd9ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xcfbfffff] page 2M
[    0.000000]  [mem 0xcfc00000-0xcfd9ffff] page 4k
[    0.000000] RAMDISK: [mem 0x35e74000-0x36f31fff]
[    0.000000] ACPI: RSDP 00000000000f6b80 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000cfdd1000 00048 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000cfdd1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000cfdd1100 0792A (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000cfda0000 00040
[    0.000000] ACPI: SSDT 00000000cfdd8b00 0088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: MSDM 00000000cfdd93c0 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 00000000cfdd9440 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000cfdd9480 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS 00000000cfdd9500 00034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000cfdd9570 00202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 00000000cfdd8a40 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS 00000000cfdd9780 061FD (v01        MATS RCM 80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[    0.000000]   NODE_DATA [mem 0x12fff9000-0x12fffdfff]
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x12fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009afff]
[    0.000000]   node   0: [mem 0x00100000-0xcfd9ffff]
[    0.000000]   node   0: [mem 0x100000000-0x12fffffff]
[    0.000000] On node 0 totalpages: 1047866
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13239 pages used for memmap
[    0.000000]   DMA32 zone: 847264 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfda0000-0xcfdd0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfdd1000-0xcfdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86720 r8192 d23872 u262144
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031470
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-12-generic root=UUID=08db4ae0-0d28-4bd2-a021-0b239563b339 ro rootflags=subvol=@ quiet splash modprobe.blacklist=mceusb usbcore.autosuspend=-1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 3959688K/4191464K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 231776K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2315.555 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4631.11 BogoMIPS (lpj=9262220)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000035] Security Framework initialized
[    0.000051] AppArmor: AppArmor initialized
[    0.000052] Yama: becoming mindful.
[    0.000348] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001549] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002043] Mount-cache hash table entries: 256
[    0.002246] Initializing cgroup subsys memory
[    0.002257] Initializing cgroup subsys devices
[    0.002258] Initializing cgroup subsys freezer
[    0.002260] Initializing cgroup subsys blkio
[    0.002262] Initializing cgroup subsys perf_event
[    0.002264] Initializing cgroup subsys hugetlb
[    0.002282] tseg: 00cff00000
[    0.002285] CPU: Physical Processor ID: 0
[    0.002287] CPU: Processor Core ID: 0
[    0.002288] mce: CPU supports 6 MCE banks
[    0.002293] LVT offset 0 assigned for vector 0xf9
[    0.002299] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.002299] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[    0.002299] tlb_flushall_shift: 4
[    0.002388] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.003924] ACPI: Core revision 20130517
[    0.006214] ACPI: All ACPI Tables successfully acquired
[    0.035433] ftrace: allocating 27796 entries in 109 pages
[    0.748679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.788347] smpboot: CPU0: AMD Athlon(tm) II X4 605e Processor (fam: 10, model: 05, stepping: 02)
[    0.895180] Performance Events: AMD PMU driver.
[    0.895184] ... version:                0
[    0.895185] ... bit width:              48
[    0.895186] ... generic registers:      4
[    0.895188] ... value mask:             0000ffffffffffff
[    0.895189] ... max period:             00007fffffffffff
[    0.895190] ... fixed-purpose events:   0
[    0.895191] ... event mask:             000000000000000f
[    0.896815] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.896897] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.936145] Brought up 4 CPUs
[    0.936148] smpboot: Total of 4 processors activated (18524.44 BogoMIPS)
[    0.936959] devtmpfs: initialized
[    0.938757] EVM: security.selinux
[    0.938759] EVM: security.SMACK64
[    0.938760] EVM: security.capability
[    0.938885] PM: Registering ACPI NVS region [mem 0xcfda0000-0xcfdd0fff] (200704 bytes)
[    0.940024] regulator-dummy: no parameters
[    0.940049] RTC time:  3:59:33, date: 10/26/13
[    0.940094] NET: Registered protocol family 16
[    0.940227] node 0 link 0: io port [9000, ffff]
[    0.940230] TOM: 00000000d0000000 aka 3328M
[    0.940232] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.940234] node 0 link 0: mmio [a0000, bffff]
[    0.940237] node 0 link 0: mmio [d0000000, dfffffff]
[    0.940239] node 0 link 0: mmio [f0000000, ffffffff]
[    0.940241] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
[    0.940243] TOM2: 0000000130000000 aka 4864M
[    0.940245] bus: [bus 00-06] on node 0 link 0
[    0.940247] bus: 00 [io  0x0000-0xffff]
[    0.940248] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.940250] bus: 00 [mem 0xd0000000-0xdfffffff]
[    0.940251] bus: 00 [mem 0xe0700000-0xffffffff]
[    0.940252] bus: 00 [mem 0xe0100000-0xe06fffff]
[    0.940253] bus: 00 [mem 0x130000000-0xfcffffffff]
[    0.940330] ACPI: bus type PCI registered
[    0.940332] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.940388] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.940391] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.950371] PCI: Using configuration type 1 for base access
[    0.951466] bio: create slab <bio-0> at 0
[    0.951649] ACPI: Added _OSI(Module Device)
[    0.951651] ACPI: Added _OSI(Processor Device)
[    0.951652] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.951654] ACPI: Added _OSI(Processor Aggregator Device)
[    0.952385] ACPI: EC: Look up EC in DSDT
[    0.956763] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20130517/tbprint-204)
[    0.956902] ACPI: Interpreter enabled
[    0.956909] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.956913] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.956926] ACPI: (supports S0 S3 S4 S5)
[    0.956927] ACPI: Using IOAPIC for interrupt routing
[    0.956956] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.957034] ACPI: No dock devices found.
[    0.996638] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.996645] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.996648] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.996842] PCI host bridge to bus 0000:00
[    0.996845] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.996847] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.996849] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.996851] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.996853] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.996855] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.996857] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[    0.996869] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.996881] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.996992] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.997024] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.997073] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.997103] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.997133] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.997180] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.997213] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    0.997243] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.997289] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.997318] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    0.997348] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.997394] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.997430] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.997445] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
[    0.997453] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
[    0.997460] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
[    0.997467] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
[    0.997475] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
[    0.997483] pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
[    0.997582] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.997593] pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
[    0.997677] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.997709] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.997724] pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
[    0.997785] pci 0000:00:12.2: supports D1 D2
[    0.997787] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.997835] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.997867] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.997877] pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
[    0.997960] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.997992] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.998007] pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
[    0.998068] pci 0000:00:13.2: supports D1 D2
[    0.998070] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.998120] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.998152] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.998263] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.998274] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.998281] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.998289] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.998296] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.998304] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    0.998388] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.998404] pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    0.998454] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.998501] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.998527] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.998639] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.998706] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.998734] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.998744] pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
[    0.998827] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.998859] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.998914] pci 0000:00:15.0: supports D1 D2
[    0.998964] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.998992] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.999003] pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
[    0.999086] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.999127] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.999142] pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
[    0.999203] pci 0000:00:16.2: supports D1 D2
[    0.999204] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.999253] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.999285] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.999356] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.999423] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.999489] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.999559] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.999671] pci 0000:01:00.0: [10de:0641] type 00 class 0x030000
[    0.999681] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.999691] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.999700] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.999707] pci 0000:01:00.0: reg 0x24: [io  0xcf00-0xcf7f]
[    0.999714] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    1.007146] pci 0000:00:02.0: PCI bridge to [bus 01]
[    1.007153] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    1.007156] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    1.007160] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.007231] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[    1.007248] pci 0000:02:00.0: reg 0x10: [mem 0xfd9f8000-0xfd9fffff 64bit]
[    1.007314] pci 0000:02:00.0: supports D1 D2
[    1.007316] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.015143] pci 0000:00:04.0: PCI bridge to [bus 02]
[    1.015150] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    1.015153] pci 0000:00:04.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    1.015157] pci 0000:00:04.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[    1.015221] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.015235] pci 0000:03:00.0: reg 0x10: [io  0xee00-0xeeff]
[    1.015254] pci 0000:03:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[    1.015267] pci 0000:03:00.0: reg 0x20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
[    1.015320] pci 0000:03:00.0: supports D1 D2
[    1.015322] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.023139] pci 0000:00:09.0: PCI bridge to [bus 03]
[    1.023146] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    1.023149] pci 0000:00:09.0:   bridge window [mem 0xfd500000-0xfd5fffff]
[    1.023152] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    1.023220] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
[    1.023237] pci 0000:04:00.0: reg 0x10: [mem 0xfddf8000-0xfddfffff 64bit]
[    1.023303] pci 0000:04:00.0: supports D1 D2
[    1.023305] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.031134] pci 0000:00:0a.0: PCI bridge to [bus 04]
[    1.031141] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    1.031144] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    1.031147] pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    1.031232] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[    1.031236] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    1.031240] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    1.031244] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    1.031246] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.031248] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.031251] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.031253] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    1.031255] pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    1.031257] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[    1.031304] pci 0000:00:15.0: PCI bridge to [bus 06]
[    1.031309] pci 0000:00:15.0:   bridge window [io  0x9000-0x9fff]
[    1.031312] pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    1.031317] pci 0000:00:15.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[    1.050032] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[    1.050080] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[    1.050123] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[    1.050163] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[    1.050203] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[    1.050242] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[    1.050282] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[    1.050321] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[    1.050734] ACPI: \_SB_.PCI0: notify handler is installed
[    1.050768] Found 1 acpi root devices
[    1.050901] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.050903] vgaarb: loaded
[    1.050904] vgaarb: bridge control possible 0000:01:00.0
[    1.051078] SCSI subsystem initialized
[    1.051081] ACPI: bus type ATA registered
[    1.051172] libata version 3.00 loaded.
[    1.051187] ACPI: bus type USB registered
[    1.051205] usbcore: registered new interface driver usbfs
[    1.051213] usbcore: registered new interface driver hub
[    1.051237] usbcore: registered new device driver usb
[    1.051364] PCI: Using ACPI for IRQ routing
[    1.057490] PCI: pci_cache_line_size set to 64 bytes
[    1.057500] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    1.057551] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
[    1.057553] e820: reserve RAM buffer [mem 0xcfda0000-0xcfffffff]
[    1.057636] NetLabel: Initializing
[    1.057637] NetLabel:  domain hash size = 128
[    1.057639] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.057648] NetLabel:  unlabeled traffic allowed by default
[    1.057747] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.057751] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    1.059813] Switched to clocksource hpet
[    1.064740] AppArmor: AppArmor Filesystem Enabled
[    1.064770] pnp: PnP ACPI init
[    1.064784] ACPI: bus type PNP registered
[    1.064884] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    1.064887] system 00:00: [io  0x0220-0x0225] has been reserved
[    1.064889] system 00:00: [io  0x0290-0x0294] has been reserved
[    1.064893] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.079998] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.080029] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[    1.080073] system 00:01: [io  0x0900-0x091f] has been reserved
[    1.080076] system 00:01: [io  0x0228-0x022f] has been reserved
[    1.080078] system 00:01: [io  0x040b] has been reserved
[    1.080080] system 00:01: [io  0x04d6] has been reserved
[    1.080082] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    1.080084] system 00:01: [io  0x0c14] has been reserved
[    1.080086] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    1.080088] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    1.080090] system 00:01: [io  0x0c6f] has been reserved
[    1.080092] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    1.080094] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    1.080096] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    1.080098] system 00:01: [io  0x0800-0x08fe] could not be reserved
[    1.080101] system 00:01: [io  0x0a10-0x0a17] has been reserved
[    1.080103] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    1.080105] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    1.080107] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    1.080109] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    1.080113] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.080201] pnp 00:02: [dma 4]
[    1.080220] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.080289] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.080329] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.080350] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.080375] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.080595] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    1.080598] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.080719] pnp 00:08: disabling [mem 0x000d4200-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.080722] pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.080725] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.080727] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.080730] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.080732] pnp 00:08: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.080774] system 00:08: [mem 0xcfda0000-0xcfdfffff] could not be reserved
[    1.080777] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[    1.080779] system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved
[    1.080781] system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved
[    1.080784] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.080786] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
[    1.080788] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
[    1.080791] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.080809] pnp: PnP ACPI: found 9 devices
[    1.080811] ACPI: bus type PNP unregistered
[    1.087135] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[    1.087139] pci 0000:00:02.0: PCI bridge to [bus 01]
[    1.087142] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    1.087145] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    1.087148] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.087152] pci 0000:00:04.0: PCI bridge to [bus 02]
[    1.087154] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    1.087157] pci 0000:00:04.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    1.087160] pci 0000:00:04.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[    1.087163] pci 0000:00:09.0: PCI bridge to [bus 03]
[    1.087166] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    1.087168] pci 0000:00:09.0:   bridge window [mem 0xfd500000-0xfd5fffff]
[    1.087171] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    1.087175] pci 0000:00:0a.0: PCI bridge to [bus 04]
[    1.087177] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    1.087180] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    1.087183] pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    1.087186] pci 0000:00:14.4: PCI bridge to [bus 05]
[    1.087189] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    1.087193] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    1.087196] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    1.087201] pci 0000:00:15.0: PCI bridge to [bus 06]
[    1.087204] pci 0000:00:15.0:   bridge window [io  0x9000-0x9fff]
[    1.087208] pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    1.087211] pci 0000:00:15.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[    1.087818] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.087820] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.087822] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.087824] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    1.087826] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    1.087828] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
[    1.087831] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    1.087833] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[    1.087835] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.087837] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    1.087839] pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
[    1.087841] pci_bus 0000:02: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[    1.087844] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    1.087846] pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd5fffff]
[    1.087848] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    1.087850] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    1.087852] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
[    1.087854] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    1.087856] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    1.087858] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    1.087860] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff pref]
[    1.087862] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    1.087864] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    1.087866] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    1.087868] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    1.087870] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
[    1.087872] pci_bus 0000:05: resource 9 [mem 0xd0000000-0xfebfffff]
[    1.087875] pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
[    1.087877] pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
[    1.087879] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[    1.087917] NET: Registered protocol family 2
[    1.088103] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    1.088283] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.088418] TCP: Hash tables configured (established 32768 bind 32768)
[    1.088458] TCP: reno registered
[    1.088468] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.088496] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.088601] NET: Registered protocol family 1
[    1.376082] pci 0000:01:00.0: Boot video device
[    1.376188] PCI: CLS 64 bytes, default 64
[    1.376247] Trying to unpack rootfs image as initramfs...
[    1.694911] Freeing initrd memory: 17144K (ffff880035e74000 - ffff880036f32000)
[    1.695185] PCI-DMA: Disabling AGP.
[    1.695274] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.695276] PCI-DMA: using GART IOMMU.
[    1.695278] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.698662] LVT offset 1 assigned for vector 0x400
[    1.698673] IBS: LVT offset 1 assigned
[    1.698703] perf: AMD IBS detected (0x0000001f)
[    1.698732] Scanning for low memory corruption every 60 seconds
[    1.698982] Initialise module verification
[    1.699025] audit: initializing netlink socket (disabled)
[    1.699035] type=2000 audit(1382759972.872:1): initialized
[    1.729488] bounce pool size: 64 pages
[    1.729497] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.730768] zbud: loaded
[    1.730908] VFS: Disk quotas dquot_6.5.2
[    1.730956] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.731523] fuse init (API version 7.22)
[    1.731599] msgmni has been set to 7896
[    1.732085] Key type asymmetric registered
[    1.732090] Asymmetric key parser 'x509' registered
[    1.732157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.732193] io scheduler noop registered
[    1.732195] io scheduler deadline registered (default)
[    1.732222] io scheduler cfq registered
[    1.732470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.732483] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.732602] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.732607] ACPI: Power Button [PWRB]
[    1.732647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.732649] ACPI: Power Button [PWRF]
[    1.732787] GHES: HEST is not enabled!
[    1.732860] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.734178] Linux agpgart interface v0.103
[    1.735518] brd: module loaded
[    1.736325] loop: module loaded
[    1.736684] libphy: Fixed MDIO Bus: probed
[    1.736762] tun: Universal TUN/TAP device driver, 1.6
[    1.736763] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    1.736838] PPP generic driver version 2.4.2
[    1.736876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.736877] ehci-pci: EHCI PCI platform driver
[    1.737066] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.737076] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.737087] QUIRK: Enable AMD PLL fix
[    1.737090] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.737099] ehci-pci 0000:00:12.2: debug port 1
[    1.737138] ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
[    1.747480] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.747506] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.747509] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.747511] usb usb1: Product: EHCI Host Controller
[    1.747512] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[    1.747514] usb usb1: SerialNumber: 0000:00:12.2
[    1.747646] hub 1-0:1.0: USB hub found
[    1.747650] hub 1-0:1.0: 5 ports detected
[    1.747947] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.747953] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.747957] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.747966] ehci-pci 0000:00:13.2: debug port 1
[    1.747991] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
[    1.759473] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.759498] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.759500] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.759502] usb usb2: Product: EHCI Host Controller
[    1.759504] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[    1.759506] usb usb2: SerialNumber: 0000:00:13.2
[    1.759635] hub 2-0:1.0: USB hub found
[    1.759639] hub 2-0:1.0: 5 ports detected
[    1.759934] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.759940] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.759944] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.759953] ehci-pci 0000:00:16.2: debug port 1
[    1.759980] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
[    1.771460] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.771490] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.771493] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.771495] usb usb3: Product: EHCI Host Controller
[    1.771496] usb usb3: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[    1.771498] usb usb3: SerialNumber: 0000:00:16.2
[    1.771629] hub 3-0:1.0: USB hub found
[    1.771633] hub 3-0:1.0: 4 ports detected
[    1.771753] ehci-platform: EHCI generic platform driver
[    1.771772] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.771773] ohci-platform: OHCI generic platform driver
[    1.771779] uhci_hcd: USB Universal Host Controller Interface driver
[    1.771876] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.771882] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    1.771977] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[    1.772023] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.772025] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.772027] usb usb4: Product: xHCI Host Controller
[    1.772029] usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[    1.772031] usb usb4: SerialNumber: 0000:02:00.0
[    1.772119] xHCI xhci_add_endpoint called for root hub
[    1.772121] xHCI xhci_check_bandwidth called for root hub
[    1.772138] hub 4-0:1.0: USB hub found
[    1.772143] hub 4-0:1.0: 2 ports detected
[    1.772198] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.772201] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5
[    1.772219] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[    1.772221] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.772223] usb usb5: Product: xHCI Host Controller
[    1.772224] usb usb5: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[    1.772226] usb usb5: SerialNumber: 0000:02:00.0
[    1.772281] xHCI xhci_add_endpoint called for root hub
[    1.772283] xHCI xhci_check_bandwidth called for root hub
[    1.772301] hub 5-0:1.0: USB hub found
[    1.772306] hub 5-0:1.0: 2 ports detected
[    1.779611] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.779622] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[    1.779720] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
[    1.779775] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    1.779777] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.779779] usb usb6: Product: xHCI Host Controller
[    1.779781] usb usb6: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[    1.779783] usb usb6: SerialNumber: 0000:04:00.0
[    1.779881] xHCI xhci_add_endpoint called for root hub
[    1.779882] xHCI xhci_check_bandwidth called for root hub
[    1.779903] hub 6-0:1.0: USB hub found
[    1.779908] hub 6-0:1.0: 2 ports detected
[    1.779970] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.779973] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
[    1.779990] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[    1.779992] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.779994] usb usb7: Product: xHCI Host Controller
[    1.779996] usb usb7: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[    1.779998] usb usb7: SerialNumber: 0000:04:00.0
[    1.780048] xHCI xhci_add_endpoint called for root hub
[    1.780050] xHCI xhci_check_bandwidth called for root hub
[    1.780065] hub 7-0:1.0: USB hub found
[    1.780070] hub 7-0:1.0: 2 ports detected
[    1.787582] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.819991] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.819992] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    2.071384] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.071550] mousedev: PS/2 mouse device common for all mice
[    2.071670] rtc_cmos 00:04: RTC can wake from S4
[    2.071761] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.071781] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.071847] device-mapper: uevent: version 1.0.3
[    2.071902] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx
[    2.071907] cpuidle: using governor ladder
[    2.071909] cpuidle: using governor menu
[    2.071921] ledtrig-cpu: registered to indicate activity on CPUs
[    2.072008] TCP: cubic registered
[    2.072093] NET: Registered protocol family 10
[    2.072280] NET: Registered protocol family 17
[    2.072290] Key type dns_resolver registered
[    2.072607] PM: Hibernation image not present or could not be loaded.
[    2.072610] Loading module verification certificates
[    2.073771] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
[    2.073782] registered taskstats version 1
[    2.076321] Key type trusted registered
[    2.078577] Key type encrypted registered
[    2.080739] AppArmor: AppArmor sha1 policy hashing enabled
[    2.081019]   Magic number: 1:736:968
[    2.081076] memory memory19: hash matches
[    2.081109] rtc_cmos 00:04: setting system clock to 2013-10-26 03:59:35 UTC (1382759975)
[    2.081207] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.081319] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.081320] EDD information not available.
[    2.082648] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    2.082651] Write protecting the kernel read-only data: 12288k
[    2.085657] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[    2.087836] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[    2.102168] systemd-udevd[121]: starting version 204
[    2.119348] mii: module verification failed: signature and/or required key missing - tainting kernel
[    2.120222] ahci 0000:00:11.0: version 3.0
[    2.120469] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    2.120473] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.121031] scsi0 : ahci
[    2.121109] scsi1 : ahci
[    2.121165] scsi2 : ahci
[    2.121222] scsi3 : ahci
[    2.121278] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[    2.121281] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[    2.121283] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[    2.121285] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[    2.121879] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.121895] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.122116] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    2.122286] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000062a000, 90:2b:34:19:e4:3b, XID 0c900800 IRQ 42
[    2.122289] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.124248] scsi4 : pata_atiixp
[    2.124532] scsi5 : pata_atiixp
[    2.124782] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    2.124785] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    2.319175] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    2.439131] ata4: SATA link down (SStatus 0 SControl 300)
[    2.439180] ata1: SATA link down (SStatus 0 SControl 300)
[    2.439213] ata3: SATA link down (SStatus 0 SControl 300)
[    2.611030] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.611373] ata2.00: ATA-9: M4-CT128M4SSD2, 040H, max UDMA/100
[    2.611378] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.611749] ata2.00: configured for UDMA/100
[    2.611949] scsi 1:0:0:0: Direct-Access     ATA      M4-CT128M4SSD2   040H PQ: 0 ANSI: 5
[    2.612107] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.612162] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.612367] sd 1:0:0:0: [sda] Write Protect is off
[    2.612370] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.612434] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.612902]  sda: sda1 sda2 sda3 sda4
[    2.613325] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.618818] usb 1-2: New USB device found, idVendor=046d, idProduct=0807
[    2.618822] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    2.618825] usb 1-2: SerialNumber: 351B2D60
[    2.694976] tsc: Refined TSC clocksource calibration: 2315.480 MHz
[    2.706942] raid6: sse2x1    3376 MB/s
[    2.734953] usb 3-4: new high-speed USB device number 2 using ehci-pci
[    2.774891] raid6: sse2x2    5236 MB/s
[    2.842852] raid6: sse2x4    6369 MB/s
[    2.842854] raid6: using algorithm sse2x4 (6369 MB/s)
[    2.842855] raid6: using intx1 recovery algorithm
[    2.843175] xor: measuring software checksum speed
[    2.868124] usb 3-4: New USB device found, idVendor=05e3, idProduct=0606
[    2.868129] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.868131] usb 3-4: Product: USB2.0 Hub
[    2.868529] hub 3-4:1.0: USB hub found
[    2.868869] hub 3-4:1.0: 4 ports detected
[    2.882830]    prefetch64-sse:  9479.000 MB/sec
[    2.922807]    generic_sse:  8955.000 MB/sec
[    2.922809] xor: using function: prefetch64-sse (9479.000 MB/sec)
[    2.926574] bio: create slab <bio-1> at 1
[    2.926871] Btrfs loaded
[    2.928914] device label home devid 1 transid 112643 /dev/sda1
[    2.929598] device label xubuntu devid 1 transid 95943 /dev/sda3
[    2.929925] device label opensuse devid 1 transid 4 /dev/sda4
[    2.935573] device label xubuntu devid 1 transid 95943 /dev/disk/by-uuid/08db4ae0-0d28-4bd2-a021-0b239563b339
[    2.936191] btrfs: disk space caching is enabled
[    2.945137] Btrfs detected SSD devices, enabling SSD mode
[    3.138948] usb 3-4.1: new high-speed USB device number 3 using ehci-pci
[    3.232502] usb 3-4.1: New USB device found, idVendor=05e3, idProduct=0606
[    3.232507] usb 3-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.232510] usb 3-4.1: Product: USB2.0 Hub
[    3.232900] hub 3-4.1:1.0: USB hub found
[    3.233245] hub 3-4.1:1.0: 4 ports detected
[    3.506824] usb 3-4.1.1: new high-speed USB device number 4 using ehci-pci
[    3.618306] usb 3-4.1.1: New USB device found, idVendor=152e, idProduct=2507
[    3.618311] usb 3-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.618314] usb 3-4.1.1: Product: Super Multi Rewriter
[    3.618316] usb 3-4.1.1: Manufacturer: HLDS Inc.
[    3.618318] usb 3-4.1.1: SerialNumber: P01061020072621
[    3.690698] usb 3-4.1.3: new low-speed USB device number 5 using ehci-pci
[    3.694483] Switched to clocksource tsc
[    3.792144] usb 3-4.1.3: New USB device found, idVendor=06a3, idProduct=5f0d
[    3.792149] usb 3-4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.792152] usb 3-4.1.3: Product: Saitek P2600 Rumble Force Pad
[    3.792154] usb 3-4.1.3: Manufacturer: Saitek PLC
[    3.862577] usb 3-4.1.4: new low-speed USB device number 6 using ehci-pci
[    3.966149] usb 3-4.1.4: New USB device found, idVendor=1241, idProduct=1037
[    3.966153] usb 3-4.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.966155] usb 3-4.1.4: Product: Wireless TrackballKeyboard
[    3.966157] usb 3-4.1.4: Manufacturer: FOCUS
[    4.153965] btrfs: disk space caching is enabled
[    4.204086] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.221489] device label home devid 1 transid 112643 /dev/sda1
[    4.229945] systemd-udevd[384]: starting version 204
[    4.254751] Btrfs detected SSD devices, enabling SSD mode
[    4.271218] wmi: Mapper loaded
[    4.272490] lp: driver loaded but no devices found
[    4.291155] nvidia: module license 'NVIDIA' taints kernel.
[    4.291161] Disabling lock debugging due to kernel taint
[    4.303601] ohci-pci: OHCI PCI platform driver
[    4.303818] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    4.303834] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[    4.303868] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
[    4.304828] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    4.304968] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.88  Wed Mar 27 14:26:46 PDT 2013
[    4.318888] MCE: In-kernel MCE decoding enabled.
[    4.321676] EDAC MC: Ver: 3.0.0
[    4.324007] type=1400 audit(1382759977.738:2): apparmor="STATUS" operation="profile_load" parent=435 profile="unconfined" name="/sbin/dhclient" pid=437 comm="apparmor_parser"
[    4.324016] type=1400 audit(1382759977.738:3): apparmor="STATUS" operation="profile_load" parent=435 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=437 comm="apparmor_parser"
[    4.324021] type=1400 audit(1382759977.738:4): apparmor="STATUS" operation="profile_load" parent=435 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=437 comm="apparmor_parser"
[    4.324730] type=1400 audit(1382759977.738:5): apparmor="STATUS" operation="profile_replace" parent=435 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=437 comm="apparmor_parser"
[    4.324736] type=1400 audit(1382759977.738:6): apparmor="STATUS" operation="profile_replace" parent=435 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=437 comm="apparmor_parser"
[    4.325096] type=1400 audit(1382759977.738:7): apparmor="STATUS" operation="profile_replace" parent=435 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=437 comm="apparmor_parser"
[    4.326825] AMD64 EDAC driver v3.4.0
[    4.355672] microcode: CPU0: patch_level=0x010000c6
[    4.361556] microcode: CPU0: new patch_level=0x010000db
[    4.361572] microcode: CPU1: patch_level=0x010000c6
[    4.361580] microcode: CPU1: new patch_level=0x010000db
[    4.361590] microcode: CPU2: patch_level=0x010000c6
[    4.361599] microcode: CPU2: new patch_level=0x010000db
[    4.361608] microcode: CPU3: patch_level=0x010000c6
[    4.361616] microcode: CPU3: new patch_level=0x010000db
[    4.361709] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    4.362090] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    4.362093] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.362095] usb usb8: Product: OHCI PCI host controller
[    4.362097] usb usb8: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[    4.362099] usb usb8: SerialNumber: 0000:00:12.0
[    4.362544] hub 8-0:1.0: USB hub found
[    4.362564] hub 8-0:1.0: 5 ports detected
[    4.362904] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    4.362912] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[    4.362955] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
[    4.366765] hidraw: raw HID events driver (C) Jiri Kosina
[    4.367268] kvm: disabled by bios
[    4.374716] usb-storage 3-4.1.1:1.0: USB Mass Storage device detected
[    4.378529] scsi6 : usb-storage 3-4.1.1:1.0
[    4.378647] usbcore: registered new interface driver usb-storage
[    4.397935] device label xubuntu devid 1 transid 95943 /dev/sda3
[    4.410684] usbcore: registered new interface driver usbhid
[    4.410688] usbhid: USB HID core driver
[    4.412797] device label opensuse devid 1 transid 4 /dev/sda4
[    4.415991] device label xubuntu devid 1 transid 95943 /dev/sda3
[    4.423440] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    4.423446] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.423449] usb usb9: Product: OHCI PCI host controller
[    4.423451] usb usb9: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[    4.423453] usb usb9: SerialNumber: 0000:00:13.0
[    4.423618] hub 9-0:1.0: USB hub found
[    4.423626] hub 9-0:1.0: 5 ports detected
[    4.423963] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    4.423969] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[    4.423989] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
[    4.425051] device label home devid 1 transid 112643 /dev/sda1
[    4.443524] device label home devid 1 transid 112643 /dev/sda1
[    4.443992] device label opensuse devid 1 transid 4 /dev/sda4
[    4.481991] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    4.481996] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.481998] usb usb10: Product: OHCI PCI host controller
[    4.482000] usb usb10: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[    4.482002] usb usb10: SerialNumber: 0000:00:14.5
[    4.482198] hub 10-0:1.0: USB hub found
[    4.482204] hub 10-0:1.0: 2 ports detected
[    4.483712] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    4.483720] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[    4.483750] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
[    4.504292] input: Saitek PLC Saitek P2600 Rumble Force Pad as /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.0/input/input2
[    4.504405] hid-generic 0003:06A3:5F0D.0001: input,hidraw0: USB HID v1.10 Joystick [Saitek PLC Saitek P2600 Rumble Force Pad] on usb-0000:00:16.2-4.1.3/input0
[    4.504621] input: FOCUS Wireless TrackballKeyboard as /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4.1/3-4.1.4/3-4.1.4:1.0/input/input3
[    4.504697] hid-generic 0003:1241:1037.0002: input,hidraw1: USB HID v1.10 Keyboard [FOCUS Wireless TrackballKeyboard] on usb-0000:00:16.2-4.1.4/input0
[    4.504991] input: FOCUS Wireless TrackballKeyboard as /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4.1/3-4.1.4/3-4.1.4:1.1/input/input4
[    4.505123] hid-generic 0003:1241:1037.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [FOCUS Wireless TrackballKeyboard] on usb-0000:00:16.2-4.1.4/input1
[    4.532994] Bluetooth: Core ver 2.16
[    4.533015] NET: Registered protocol family 31
[    4.533017] Bluetooth: HCI device and connection manager initialized
[    4.533025] Bluetooth: HCI socket layer initialized
[    4.533028] Bluetooth: L2CAP socket layer initialized
[    4.533034] Bluetooth: SCO socket layer initialized
[    4.538188] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.538192] Bluetooth: BNEP filters: protocol multicast
[    4.538202] Bluetooth: BNEP socket layer initialized
[    4.541953] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[    4.541958] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.541961] usb usb11: Product: OHCI PCI host controller
[    4.541963] usb usb11: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[    4.541965] usb usb11: SerialNumber: 0000:00:16.0
[    4.542890] hub 11-0:1.0: USB hub found
[    4.542899] hub 11-0:1.0: 4 ports detected
[    4.544475] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130517/utaddress-251)
[    4.544484] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.546159] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    4.546215] sp5100_tco: PCI Revision ID: 0x42
[    4.546247] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    4.546257] sp5100_tco: Last reboot was not triggered by watchdog.
[    4.550062] EDAC amd64: DRAM ECC disabled.
[    4.550074] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    4.550074]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    4.550074]  (Note that use of the override may cause unknown side effects.)
[    4.550634] hda-intel 0000:00:14.2: Using LPIB position fix
[    4.553802] sp5100_tco: initialized (0xffffc9000063ab00). heartbeat=60 sec (nowayout=0)
[    4.557193] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[    4.557946] Bluetooth: RFCOMM TTY layer initialized
[    4.557966] Bluetooth: RFCOMM socket layer initialized
[    4.557968] Bluetooth: RFCOMM ver 1.11
[    4.571435] SKU: Nid=0x1d sku_cfg=0x4005e601
[    4.571439] SKU: port_connectivity=0x1
[    4.571441] SKU: enable_pcbeep=0x0
[    4.571442] SKU: check_sum=0x00000005
[    4.571443] SKU: customization=0x000000e6
[    4.571444] SKU: external_amp=0x0
[    4.571445] SKU: platform_type=0x0
[    4.571446] SKU: swap=0x0
[    4.571447] SKU: override=0x1
[    4.571916] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    4.571917]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.571919]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.571920]    mono: mono_out=0x0
[    4.571921]    dig-out=0x11/0x1e
[    4.571922]    inputs:
[    4.571924]      Rear Mic=0x18
[    4.571926]      Front Mic=0x19
[    4.571927]      Line=0x1a
[    4.571928]      CD=0x1c
[    4.571930] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[    4.571931] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[    4.586369] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    4.586556] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    4.586705] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    4.586793] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    4.586877] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    4.586956] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    4.587046] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    4.587136] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    4.589018] ppdev: user-space parallel port driver
[    4.614937] init: avahi-cups-reload main process (600) terminated with status 1
[    4.657368] type=1400 audit(1382759978.070:8): apparmor="STATUS" operation="profile_load" parent=613 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=660 comm="apparmor_parser"
[    4.657378] type=1400 audit(1382759978.070:9): apparmor="STATUS" operation="profile_load" parent=613 profile="unconfined" name="/usr/sbin/cupsd" pid=660 comm="apparmor_parser"
[    4.658291] type=1400 audit(1382759978.074:10): apparmor="STATUS" operation="profile_replace" parent=613 profile="unconfined" name="/usr/sbin/cupsd" pid=660 comm="apparmor_parser"
[    4.706173] init: failsafe main process (629) killed by TERM signal
[    4.707149] Linux video capture interface: v2.00
[    4.923761] r8169 0000:03:00.0 eth1: link down
[    4.923792] r8169 0000:03:00.0 eth1: link down
[    4.923817] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    4.924132] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    4.937012] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[    4.937017] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1<6>[    4.937277] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0807)
[    4.937287] usbcore: registered new interface driver snd-usb-audio
[    4.952162] input: UVC Camera (046d:0807) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input13
[    4.952286] usbcore: registered new interface driver uvcvideo
[    4.952288] USB Video Class driver (1.1.1)
[    4.954365] usb 8-1: new full-speed USB device number 2 using ohci-pci
[    5.000223] init: udev-fallback-graphics main process (793) terminated with status 1
[    5.122701] usb 8-1: New USB device found, idVendor=0471, idProduct=0815
[    5.122706] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.122708] usb 8-1: Product: eHome Infrared Transceiver
[    5.122710] usb 8-1: Manufacturer: Philips
[    5.122712] usb 8-1: SerialNumber: PH00RZC3
[    5.152223] lirc_dev: IR Remote Control driver registered, major 250 
[    5.185627] Registered IR keymap rc-rc6-mce
[    5.185730] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/rc/rc0/input14
[    5.185992] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/rc/rc0
[    5.189788] IR NEC protocol handler initialized
[    5.190831] IR RC6 protocol handler initialized
[    5.191342] IR RC5(x) protocol handler initialized
[    5.194507] IR JVC protocol handler initialized
[    5.201701] IR Sony protocol handler initialized
[    5.203516] IR SANYO protocol handler initialized
[    5.209300] IR MCE Keyboard/mouse protocol handler initialized
[    5.210024] IR LIRC bridge handler initialized
[    5.210327] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input15
[    5.210469] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[    5.414809] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-E10L  LE07 PQ: 0 ANSI: 0
[    5.417475] mceusb 8-1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
[    5.417481] mceusb 8-1:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active)
[    5.417527] usbcore: registered new interface driver mceusb
[    5.423656] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.423661] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.423809] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    5.424174] sr 6:0:0:0: Attached scsi generic sg1 type 5
[    7.226956] r8169 0000:03:00.0 eth1: link up
[    7.226966] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 7858.845934] init: anacron main process (2312) killed by TERM signal
[ 7859.667570] PM: Syncing filesystems ... done.
[ 7859.668866] PM: Preparing system for mem sleep
[ 7859.669049] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 7859.670428] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7859.671629] PM: Entering mem sleep
[ 7859.671653] Suspending console(s) (use no_console_suspend to debug)
[ 7859.671875] mceusb 8-1:1.0: suspend
[ 7859.672186] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 7859.672256] sd 1:0:0:0: [sda] Stopping disk
[ 7860.185422] PM: suspend of devices complete after 513.901 msecs
[ 7860.185638] PM: late suspend of devices complete after 0.213 msecs
[ 7860.185789] pcieport 0000:00:0a.0: System wakeup enabled by ACPI
[ 7860.200395] pcieport 0000:00:09.0: System wakeup enabled by ACPI
[ 7860.216380] pcieport 0000:00:04.0: System wakeup enabled by ACPI
[ 7860.232395] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[ 7860.248340] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
[ 7860.248382] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
[ 7860.248450] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[ 7860.264333] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[ 7860.264357] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[ 7860.280324] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[ 7860.280411] PM: noirq suspend of devices complete after 94.822 msecs
[ 7860.280459] ACPI: Preparing to enter system sleep state S3
[ 7860.348379] PM: Saving platform NVS memory
[ 7860.348538] Disabling non-boot CPUs ...
[ 7860.348850] Broke affinity for irq 17
[ 7860.348855] Broke affinity for irq 18
[ 7860.452198] smpboot: CPU 1 is now offline
[ 7860.556142] smpboot: CPU 2 is now offline
[ 7860.556690] Broke affinity for irq 42
[ 7860.660082] smpboot: CPU 3 is now offline
[ 7860.660604] ACPI: Low-level resume complete
[ 7860.660631] PM: Restoring platform NVS memory
[ 7860.660717] PCI-DMA: Resuming GART IOMMU
[ 7860.660718] PCI-DMA: Restoring GART aperture settings
[ 7860.660949] microcode: CPU0: new patch_level=0x010000db
[ 7860.660960] Enabling non-boot CPUs ...
[ 7860.660993] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7860.671935] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 7860.671937] perf: IBS APIC setup failed on cpu #1
[ 7860.674283] microcode: CPU1: new patch_level=0x010000db
[ 7860.674286] CPU1 is up
[ 7860.674300] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 7860.685241] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 7860.685243] perf: IBS APIC setup failed on cpu #2
[ 7860.687499] microcode: CPU2: new patch_level=0x010000db
[ 7860.687502] CPU2 is up
[ 7860.687515] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7860.698461] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 7860.698463] perf: IBS APIC setup failed on cpu #3
[ 7860.700727] microcode: CPU3: new patch_level=0x010000db
[ 7860.700730] CPU3 is up
[ 7860.701263] ACPI: Waking up from system sleep state S3
[ 7860.770763] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[ 7860.784577] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[ 7860.784600] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[ 7860.800568] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[ 7860.816602] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
[ 7860.816648] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
[ 7860.832551] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[ 7860.848559] pcieport 0000:00:04.0: System wakeup disabled by ACPI
[ 7860.880542] pcieport 0000:00:0a.0: System wakeup disabled by ACPI
[ 7860.880641] PM: noirq resume of devices complete after 119.999 msecs
[ 7860.880787] PM: early resume of devices complete after 0.122 msecs
[ 7860.880998] usb usb4: root hub lost power or was reset
[ 7860.880999] usb usb5: root hub lost power or was reset
[ 7860.881066] pcieport 0000:00:09.0: System wakeup disabled by ACPI
[ 7860.881157] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[ 7860.881233] usb usb6: root hub lost power or was reset
[ 7860.881234] usb usb7: root hub lost power or was reset
[ 7860.881384] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
[ 7861.072400] usb 1-2: reset high-speed USB device number 3 using ehci-pci
[ 7861.208351] ata1: SATA link down (SStatus 0 SControl 300)
[ 7861.208417] ata4: SATA link down (SStatus 0 SControl 300)
[ 7861.208451] ata3: SATA link down (SStatus 0 SControl 300)
[ 7861.317816] r8169 0000:03:00.0 eth1: link down
[ 7861.377487] snd-usb-audio 1-2:1.2: no reset_resume for driver snd-usb-audio?
[ 7861.377489] snd-usb-audio 1-2:1.3: no reset_resume for driver snd-usb-audio?
[ 7861.380239] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7861.380974] ata2.00: configured for UDMA/100
[ 7861.396306] sd 1:0:0:0: [sda] Starting disk
[ 7861.396565] PM: resume of devices complete after 516.055 msecs
[ 7861.619073] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[ 7861.619607] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[ 7861.619607] PM: Finishing wakeup.
[ 7861.619609] Restarting tasks ... done.
[ 7861.632083] usb 8-1: USB disconnect, device number 2
[ 7862.119868] usb 8-1: new full-speed USB device number 3 using ohci-pci
[ 7862.288816] usb 8-1: New USB device found, idVendor=0471, idProduct=0815
[ 7862.288830] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7862.288838] usb 8-1: Product: eHome Infrared Transceiver
[ 7862.288844] usb 8-1: Manufacturer: Philips
[ 7862.288850] usb 8-1: SerialNumber: PH00RZC3
[ 7862.294823] Registered IR keymap rc-rc6-mce
[ 7862.295089] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/rc/rc1/input16
[ 7862.295249] rc1: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/rc/rc1
[ 7862.295476] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input17
[ 7862.295760] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 7862.471670] mceusb 8-1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
[ 7862.471684] mceusb 8-1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)
[ 7863.290028] r8169 0000:03:00.0 eth1: link up
[29150.041685] r8169 0000:03:00.0 eth1: link down
[29516.063384] r8169 0000:03:00.0 eth1: link up
[30217.855401] r8169 0000:03:00.0 eth1: link down
[30221.837714] r8169 0000:03:00.0 eth1: link up
[58637.757564] init: anacron main process (4959) killed by TERM signal
[58638.537551] PM: Syncing filesystems ... done.
[58638.556702] PM: Preparing system for mem sleep
[58638.556974] Freezing user space processes ... (elapsed 0.001 seconds) done.
[58638.558366] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[58638.559584] PM: Entering mem sleep
[58638.559609] Suspending console(s) (use no_console_suspend to debug)
[58638.559806] mceusb 8-1:1.0: suspend
[58638.560129] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[58638.560198] sd 1:0:0:0: [sda] Stopping disk
[58639.073526] PM: suspend of devices complete after 514.047 msecs
[58639.073740] PM: late suspend of devices complete after 0.211 msecs
[58639.073895] pcieport 0000:00:0a.0: System wakeup enabled by ACPI
[58639.088630] pcieport 0000:00:09.0: System wakeup enabled by ACPI
[58639.104620] pcieport 0000:00:04.0: System wakeup enabled by ACPI
[58639.120633] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[58639.136564] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
[58639.136607] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
[58639.136674] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[58639.152553] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[58639.152578] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[58639.168545] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[58639.168634] PM: noirq suspend of devices complete after 94.942 msecs
[58639.168680] ACPI: Preparing to enter system sleep state S3
[58639.228603] PM: Saving platform NVS memory
[58639.228759] Disabling non-boot CPUs ...
[58639.229042] Broke affinity for irq 18
[58639.332423] smpboot: CPU 1 is now offline
[58639.332977] Broke affinity for irq 19
[58639.436367] smpboot: CPU 2 is now offline
[58639.436845] Broke affinity for irq 42
[58639.540307] smpboot: CPU 3 is now offline
[58639.540854] ACPI: Low-level resume complete
[58639.540881] PM: Restoring platform NVS memory
[58639.540965] PCI-DMA: Resuming GART IOMMU
[58639.540966] PCI-DMA: Restoring GART aperture settings
[58639.541192] LVT offset 0 assigned for vector 0xf9
[58639.541198] microcode: CPU0: new patch_level=0x010000db
[58639.541211] Enabling non-boot CPUs ...
[58639.541244] smpboot: Booting Node 0 Processor 1 APIC 0x1
[58639.552187] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[58639.552188] perf: IBS APIC setup failed on cpu #1
[58639.554536] microcode: CPU1: new patch_level=0x010000db
[58639.554538] CPU1 is up
[58639.554552] smpboot: Booting Node 0 Processor 2 APIC 0x2
[58639.565494] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[58639.565496] perf: IBS APIC setup failed on cpu #2
[58639.567751] microcode: CPU2: new patch_level=0x010000db
[58639.567754] CPU2 is up
[58639.567767] smpboot: Booting Node 0 Processor 3 APIC 0x3
[58639.578709] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[58639.578710] perf: IBS APIC setup failed on cpu #3
[58639.580979] microcode: CPU3: new patch_level=0x010000db
[58639.580981] CPU3 is up
[58639.581511] ACPI: Waking up from system sleep state S3
[58639.645066] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[58639.660808] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[58639.660830] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[58639.676797] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[58639.692831] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
[58639.692878] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
[58639.708780] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[58639.724789] pcieport 0000:00:04.0: System wakeup disabled by ACPI
[58639.756773] pcieport 0000:00:0a.0: System wakeup disabled by ACPI
[58639.756873] PM: noirq resume of devices complete after 112.001 msecs
[58639.757018] PM: early resume of devices complete after 0.121 msecs
[58639.757214] usb usb4: root hub lost power or was reset
[58639.757216] usb usb5: root hub lost power or was reset
[58639.757329] pcieport 0000:00:09.0: System wakeup disabled by ACPI
[58639.757377] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[58639.757466] usb usb6: root hub lost power or was reset
[58639.757468] usb usb7: root hub lost power or was reset
[58639.757606] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
[58639.895706] mceusb 8-1:1.0: resume
[58639.948630] usb 1-2: reset high-speed USB device number 3 using ehci-pci
[58640.080603] ata1: SATA link down (SStatus 0 SControl 300)
[58640.080643] ata3: SATA link down (SStatus 0 SControl 300)
[58640.084568] ata4: SATA link down (SStatus 0 SControl 300)
[58640.194048] r8169 0000:03:00.0 eth1: link down
[58640.252463] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[58640.253068] snd-usb-audio 1-2:1.2: no reset_resume for driver snd-usb-audio?
[58640.253069] snd-usb-audio 1-2:1.3: no reset_resume for driver snd-usb-audio?
[58640.253134] ata2.00: configured for UDMA/100
[58640.268532] sd 1:0:0:0: [sda] Starting disk
[58640.268794] PM: resume of devices complete after 512.050 msecs
[58640.491309] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[58640.491844] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[58640.491844] PM: Finishing wakeup.
[58640.491846] Restarting tasks ... done.
[58642.186219] r8169 0000:03:00.0 eth1: link up
[100924.574933] init: anacron main process (7618) killed by TERM signal
[100925.319342] PM: Syncing filesystems ... done.
[100925.337824] PM: Preparing system for mem sleep
[100925.338010] Freezing user space processes ... (elapsed 0.001 seconds) done.
[100925.339371] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[100925.340584] PM: Entering mem sleep
[100925.340611] Suspending console(s) (use no_console_suspend to debug)
[100925.340830] mceusb 8-1:1.0: suspend
[100925.341137] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[100925.341207] sd 1:0:0:0: [sda] Stopping disk
[100925.869526] PM: suspend of devices complete after 529.052 msecs
[100925.869739] PM: late suspend of devices complete after 0.210 msecs
[100925.869893] pcieport 0000:00:0a.0: System wakeup enabled by ACPI
[100925.885325] pcieport 0000:00:09.0: System wakeup enabled by ACPI
[100925.901315] pcieport 0000:00:04.0: System wakeup enabled by ACPI
[100925.917327] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[100925.933274] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
[100925.933316] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
[100925.933383] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[100925.949265] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[100925.949290] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[100925.965257] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[100925.965344] PM: noirq suspend of devices complete after 95.654 msecs
[100925.965389] ACPI: Preparing to enter system sleep state S3
[100926.029313] PM: Saving platform NVS memory
[100926.029470] Disabling non-boot CPUs ...
[100926.029711] Broke affinity for irq 18
[100926.133139] smpboot: CPU 1 is now offline
[100926.237081] smpboot: CPU 2 is now offline
[100926.341019] smpboot: CPU 3 is now offline
[100926.341528] ACPI: Low-level resume complete
[100926.341556] PM: Restoring platform NVS memory
[100926.341641] PCI-DMA: Resuming GART IOMMU
[100926.341642] PCI-DMA: Restoring GART aperture settings
[100926.341868] LVT offset 0 assigned for vector 0xf9
[100926.341874] microcode: CPU0: new patch_level=0x010000db
[100926.341886] Enabling non-boot CPUs ...
[100926.341918] smpboot: Booting Node 0 Processor 1 APIC 0x1
[100926.352860] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[100926.352861] perf: IBS APIC setup failed on cpu #1
[100926.355211] microcode: CPU1: new patch_level=0x010000db
[100926.355214] CPU1 is up
[100926.355229] smpboot: Booting Node 0 Processor 2 APIC 0x2
[100926.366170] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[100926.366171] perf: IBS APIC setup failed on cpu #2
[100926.368435] microcode: CPU2: new patch_level=0x010000db
[100926.368438] CPU2 is up
[100926.368453] smpboot: Booting Node 0 Processor 3 APIC 0x3
[100926.379395] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[100926.379397] perf: IBS APIC setup failed on cpu #3
[100926.381663] microcode: CPU3: new patch_level=0x010000db
[100926.381665] CPU3 is up
[100926.382207] ACPI: Waking up from system sleep state S3
[100926.441783] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[100926.457524] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[100926.457547] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[100926.473514] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[100926.489547] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
[100926.489593] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
[100926.505496] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[100926.521506] pcieport 0000:00:04.0: System wakeup disabled by ACPI
[100926.553487] pcieport 0000:00:0a.0: System wakeup disabled by ACPI
[100926.553589] PM: noirq resume of devices complete after 112.000 msecs
[100926.553729] PM: early resume of devices complete after 0.116 msecs
[100926.554258] usb usb4: root hub lost power or was reset
[100926.554260] usb usb5: root hub lost power or was reset
[100926.554430] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[100926.554518] pcieport 0000:00:09.0: System wakeup disabled by ACPI
[100926.554846] usb usb6: root hub lost power or was reset
[100926.554847] usb usb7: root hub lost power or was reset
[100926.555014] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
[100926.692447] mceusb 8-1:1.0: resume
[100926.745346] usb 1-2: reset high-speed USB device number 3 using ehci-pci
[100926.877292] ata3: SATA link down (SStatus 0 SControl 300)
[100926.877329] ata1: SATA link down (SStatus 0 SControl 300)
[100926.885287] ata4: SATA link down (SStatus 0 SControl 300)
[100926.994781] r8169 0000:03:00.0 eth1: link down
[100927.050970] snd-usb-audio 1-2:1.2: no reset_resume for driver snd-usb-audio?
[100927.050972] snd-usb-audio 1-2:1.3: no reset_resume for driver snd-usb-audio?
[100927.057183] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[100927.057917] ata2.00: configured for UDMA/100
[100927.073237] sd 1:0:0:0: [sda] Starting disk
[100927.073501] PM: resume of devices complete after 520.051 msecs
[100927.296679] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[100927.297228] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[100927.297229] PM: Finishing wakeup.
[100927.297231] Restarting tasks ... done.
[100928.980126] r8169 0000:03:00.0 eth1: link up
[107409.494783] perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[147819.063082] PM: Syncing filesystems ... done.
[147819.080885] PM: Preparing system for mem sleep
[147819.081082] Freezing user space processes ... (elapsed 0.001 seconds) done.
[147819.082480] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[147819.083435] PM: Entering mem sleep
[147819.083462] Suspending console(s) (use no_console_suspend to debug)
[147819.083649] mceusb 8-1:1.0: suspend
[147819.083943] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[147819.084013] sd 1:0:0:0: [sda] Stopping disk
[147819.611293] PM: suspend of devices complete after 527.967 msecs
[147819.611506] PM: late suspend of devices complete after 0.210 msecs
[147819.611662] pcieport 0000:00:0a.0: System wakeup enabled by ACPI
[147819.627099] pcieport 0000:00:09.0: System wakeup enabled by ACPI
[147819.643086] pcieport 0000:00:04.0: System wakeup enabled by ACPI
[147819.659099] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[147819.675045] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
[147819.675087] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
[147819.675154] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[147819.691036] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[147819.691061] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[147819.707028] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[147819.707115] PM: noirq suspend of devices complete after 95.658 msecs
[147819.707162] ACPI: Preparing to enter system sleep state S3
[147819.767071] PM: Saving platform NVS memory
[147819.767221] Disabling non-boot CPUs ...
[147819.767498] Broke affinity for irq 18
[147819.870915] smpboot: CPU 1 is now offline
[147819.974850] smpboot: CPU 2 is now offline
[147820.078788] smpboot: CPU 3 is now offline
[147820.079314] ACPI: Low-level resume complete
[147820.079343] PM: Restoring platform NVS memory
[147820.079426] PCI-DMA: Resuming GART IOMMU
[147820.079427] PCI-DMA: Restoring GART aperture settings
[147820.079654] LVT offset 0 assigned for vector 0xf9
[147820.079660] microcode: CPU0: new patch_level=0x010000db
[147820.079672] Enabling non-boot CPUs ...
[147820.079705] smpboot: Booting Node 0 Processor 1 APIC 0x1
[147820.090647] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[147820.090649] perf: IBS APIC setup failed on cpu #1
[147820.092994] microcode: CPU1: new patch_level=0x010000db
[147820.092997] CPU1 is up
[147820.093011] smpboot: Booting Node 0 Processor 2 APIC 0x2
[147820.103957] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[147820.103959] perf: IBS APIC setup failed on cpu #2
[147820.106216] microcode: CPU2: new patch_level=0x010000db
[147820.106219] CPU2 is up
[147820.106233] smpboot: Booting Node 0 Processor 3 APIC 0x3
[147820.117174] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[147820.117175] perf: IBS APIC setup failed on cpu #3
[147820.119442] microcode: CPU3: new patch_level=0x010000db
[147820.119445] CPU3 is up
[147820.119984] ACPI: Waking up from system sleep state S3
[147820.179548] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[147820.195292] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[147820.195315] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[147820.211281] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[147820.227316] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
[147820.227362] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
[147820.243264] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[147820.259275] pcieport 0000:00:04.0: System wakeup disabled by ACPI
[147820.291256] pcieport 0000:00:0a.0: System wakeup disabled by ACPI
[147820.291358] PM: noirq resume of devices complete after 112.006 msecs
[147820.291508] PM: early resume of devices complete after 0.125 msecs
[147820.291837] usb usb4: root hub lost power or was reset
[147820.291839] usb usb5: root hub lost power or was reset
[147820.292010] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[147820.292083] pcieport 0000:00:09.0: System wakeup disabled by ACPI
[147820.292552] usb usb6: root hub lost power or was reset
[147820.292553] usb usb7: root hub lost power or was reset
[147820.292715] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
[147820.434194] mceusb 8-1:1.0: resume
[147820.483113] usb 1-2: reset high-speed USB device number 3 using ehci-pci
[147820.635045] ata3: SATA link down (SStatus 0 SControl 300)
[147820.639034] ata4: SATA link down (SStatus 0 SControl 300)
[147820.643042] ata1: SATA link down (SStatus 0 SControl 300)
[147820.728530] r8169 0000:03:00.0 eth1: link down
[147820.796712] snd-usb-audio 1-2:1.2: no reset_resume for driver snd-usb-audio?
[147820.796713] snd-usb-audio 1-2:1.3: no reset_resume for driver snd-usb-audio?
[147820.806938] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[147820.807674] ata2.00: configured for UDMA/100
[147820.823007] sd 1:0:0:0: [sda] Starting disk
[147820.823265] PM: resume of devices complete after 532.044 msecs
[147821.044670] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[147821.045276] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[147821.045277] PM: Finishing wakeup.
[147821.045279] Restarting tasks ... done.
[147822.720930] r8169 0000:03:00.0 eth1: link up
[171321.362109] PM: Enabling pm_trace changes system date and time during resume.
[171321.362109] PM: Correct system time has to be restored manually after resume.
[171322.689894] PM: Syncing filesystems ... done.
[171322.707927] PM: Preparing system for mem sleep
[171322.708123] Freezing user space processes ... (elapsed 0.001 seconds) done.
[171322.709567] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[171322.710783] PM: Entering mem sleep
[171322.710806] Suspending console(s) (use no_console_suspend to debug)
[171322.711027] mceusb 8-1:1.0: suspend
[171322.711333] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[171322.711430] sd 1:0:0:0: [sda] Stopping disk
[171323.237510] PM: suspend of devices complete after 526.840 msecs
[171323.237724] PM: late suspend of devices complete after 0.211 msecs
[171323.237876] pcieport 0000:00:0a.0: System wakeup enabled by ACPI
[171323.253311] pcieport 0000:00:09.0: System wakeup enabled by ACPI
[171323.269299] pcieport 0000:00:04.0: System wakeup enabled by ACPI
[171323.285313] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[171323.301258] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
[171323.301301] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
[171323.301368] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[171323.317249] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[171323.317274] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[171323.333241] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[171323.333328] PM: noirq suspend of devices complete after 95.653 msecs
[171323.333373] ACPI: Preparing to enter system sleep state S3
[171323.393297] PM: Saving platform NVS memory
[171323.393450] Disabling non-boot CPUs ...
[171323.393747] Broke affinity for irq 17
[171323.497120] smpboot: CPU 1 is now offline
[171323.601060] smpboot: CPU 2 is now offline
[171323.705002] smpboot: CPU 3 is now offline
[171323.705546] ACPI: Low-level resume complete
[171323.705574] PM: Restoring platform NVS memory
[171323.705660] PCI-DMA: Resuming GART IOMMU
[171323.705661] PCI-DMA: Restoring GART aperture settings
[171323.705887] LVT offset 0 assigned for vector 0xf9
[171323.705894] microcode: CPU0: new patch_level=0x010000db
[171323.705903] Enabling non-boot CPUs ...
[171323.705936] smpboot: Booting Node 0 Processor 1 APIC 0x1
[171323.716879] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[171323.716880] perf: IBS APIC setup failed on cpu #1
[171323.719240] microcode: CPU1: new patch_level=0x010000db
[171323.719243] CPU1 is up
[171323.719258] smpboot: Booting Node 0 Processor 2 APIC 0x2
[171323.730200] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[171323.730201] perf: IBS APIC setup failed on cpu #2
[171323.732466] microcode: CPU2: new patch_level=0x010000db
[171323.732469] CPU2 is up
[171323.732482] smpboot: Booting Node 0 Processor 3 APIC 0x3
[171323.743424] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[171323.743425] perf: IBS APIC setup failed on cpu #3
[171323.745687] microcode: CPU3: new patch_level=0x010000db
[171323.745689] CPU3 is up
[171323.746229] ACPI: Waking up from system sleep state S3
[171323.810584] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[171323.825505] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[171323.825565] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[171323.841496] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[171323.857643] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
[171323.857764] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
[171323.873478] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[171323.889487] pcieport 0000:00:04.0: System wakeup disabled by ACPI
[171323.921470] pcieport 0000:00:0a.0: System wakeup disabled by ACPI
[171323.940943] PM: noirq resume of devices complete after 135.383 msecs
[171323.966176] PM: early resume of devices complete after 25.222 msecs
[171324.661364] usb usb4: root hub lost power or was reset
[171324.661367] usb usb5: root hub lost power or was reset
[171324.661485] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[171324.661622] pcieport 0000:00:09.0: System wakeup disabled by ACPI
[171324.757761] usb usb6: root hub lost power or was reset
[171324.757763] usb usb7: root hub lost power or was reset
[171324.757882] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
[171324.766526] r8169 0000:03:00.0 eth1: link down
[171325.560539] ata1: SATA link down (SStatus 0 SControl 300)
[171326.068260] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[171326.068997] ata2.00: configured for UDMA/100
[171326.404080] ata3: SATA link down (SStatus 0 SControl 300)
[171326.739896] ata4: SATA link down (SStatus 0 SControl 300)
[171327.086945] sd 1:0:0:0: [sda] Starting disk
[171327.090148] r8169 0000:03:00.0 eth1: link up
[171327.195644] usb 1-2: reset high-speed USB device number 3 using ehci-pci
[171327.499902] snd-usb-audio 1-2:1.2: no reset_resume for driver snd-usb-audio?
[171327.499903] snd-usb-audio 1-2:1.3: no reset_resume for driver snd-usb-audio?
[171327.954301] mceusb 8-1:1.0: resume
[171327.954849] PM: resume of devices complete after 3990.843 msecs
[171328.179191] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[171328.179771] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[171328.179771] PM: Finishing wakeup.
[171328.179773] Restarting tasks ... done.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1147581

Title:
  System stops waking from suspend when using an infrared remote control

Status in “linux” package in Ubuntu:
  New

Bug description:
  Since upgrading to Ubuntu 12.10, suspend will stop waking after one or two wake cycles. The system uses an infrared remote control.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC1:  ill       2918 F.... pulseaudio
   /dev/snd/controlC0:  ill       2918 F.... pulseaudio
   /dev/snd/pcmC0D1p:   ill       2918 F...m pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=1750c01c-cbd4-45d7-9305-e38b3e38cc27
  InstallationDate: Installed on 2012-04-28 (400 days ago)
  InstallationMedia: Kubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120423)
  IwConfig:
   eth0      no wireless extensions.

   lo        no wireless extensions.
  MachineType: Gigabyte Technology Co., Ltd. GA-890FXA-UD5
  MarkForUpload: True
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB:

  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-22-generic root=UUID=c052cb21-b6ea-4afd-a044-91133b2da864 ro quiet splash
  ProcVersionSignature: Ubuntu 3.8.0-22.33-generic 3.8.11
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-22-generic N/A
   linux-backports-modules-3.8.0-22-generic  N/A
   linux-firmware                            1.106
  RfKill:

  Tags:  raring
  Uname: Linux 3.8.0-22-generic x86_64
  UpgradeStatus: Upgraded to raring on 2013-04-26 (36 days ago)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/24/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F6
  dmi.board.name: GA-890FXA-UD5
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF6:bd11/24/2010:svnGigabyteTechnologyCo.,Ltd.:pnGA-890FXA-UD5:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-890FXA-UD5:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: GA-890FXA-UD5
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1147581/+subscriptions