kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #26700
[Bug 1247647] Re: Kernel oops during btrfs access
Thanks for testing. The bug may have been introduced in 3.9 or maybe
one of the 3.10 rc kernels. Can you test the following kernels:
v3.9 final: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.9-saucy/
v3.10-rc1: http://kernel.ubuntu.com/~kernel-
ppa/mainline/v3.10-rc1-saucy/
v3.10-rc5: http://kernel.ubuntu.com/~kernel-
ppa/mainline/v3.10-rc5-saucy/
You don't have to test them all, just up until the first one that
exhibits the bug.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1247647
Title:
Kernel oops during btrfs access
Status in “linux” package in Ubuntu:
Confirmed
Bug description:
cat /proc/version_signature
Ubuntu 3.11.0-12.19-generic 3.11.3
root@ubuntunas:~# sudo lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at c160 [size=16]
Kernel driver in use: ata_piix
00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c100 [size=32]
Kernel driver in use: uhci_hcd
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Kernel driver in use: piix4_smbus
00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc Device [1af4:1100]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at febf0000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febd0000 [disabled] [size=64K]
Kernel driver in use: cirrus
00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000]
Subsystem: Red Hat, Inc Device [1af4:0001]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c120 [size=32]
Region 1: Memory at febf1000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable+ Count=3 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
00:04.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
Subsystem: Red Hat, Inc Device [1af4:0002]
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=64]
Region 1: Memory at febf2000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
00:05.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
Subsystem: Red Hat, Inc Device [1af4:0002]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c040 [size=64]
Region 1: Memory at febf3000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
00:06.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
Subsystem: Red Hat, Inc Device [1af4:0002]
Physical Slot: 6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c080 [size=64]
Region 1: Memory at febf4000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
00:07.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
Subsystem: Red Hat, Inc Device [1af4:0002]
Physical Slot: 7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c0c0 [size=64]
Region 1: Memory at febf5000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
00:08.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon [1af4:1002]
Subsystem: Red Hat, Inc Device [1af4:0005]
Physical Slot: 8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c140 [size=32]
Kernel driver in use: virtio-pci
00:09.0 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer [8086:25ab]
Subsystem: Red Hat, Inc Device [1af4:1100]
Physical Slot: 9
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at febf6000 (32-bit, non-prefetchable) [size=16]
root@ubuntunas:~#
ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-12-generic 3.11.0-12.19
ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
Uname: Linux 3.11.0-12-generic x86_64
AlsaDevices:
total 0
crw-rw---- 1 root audio 116, 1 Nov 3 20:23 seq
crw-rw---- 1 root audio 116, 33 Nov 3 20:23 timer
AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
ApportVersion: 2.12.5-0ubuntu2.1
Architecture: amd64
ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
Date: Sun Nov 3 20:26:49 2013
HibernationDevice: RESUME=UUID=2447d766-b078-4ed0-87f3-c27412c10649
InstallationDate: Installed on 2011-02-03 (1003 days ago)
InstallationMedia: Ubuntu-Server 10.10 "Maverick Meerkat" - Release amd64 (20101007)
IwConfig:
eth0 no wireless extensions.
lo no wireless extensions.
Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: Bochs Bochs
MarkForUpload: True
PciMultimedia:
ProcEnviron:
TERM=linux
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 cirrusdrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=0dbf4328-2e66-42b3-88dd-b96a5c25b11d ro console=tty0 console=ttyS0,115200n8 crashkernel=384M-2G:64M,2G-:128M quiet
RelatedPackageVersions:
linux-restricted-modules-3.11.0-12-generic N/A
linux-backports-modules-3.11.0-12-generic N/A
linux-firmware 1.116
RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
SourcePackage: linux
UpgradeStatus: Upgraded to saucy on 2013-08-25 (70 days ago)
dmi.bios.date: 01/01/2007
dmi.bios.vendor: Bochs
dmi.bios.version: Bochs
dmi.chassis.type: 1
dmi.chassis.vendor: Bochs
dmi.modalias: dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr:
dmi.product.name: Bochs
dmi.sys.vendor: Bochs
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1247647/+subscriptions
References
