kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #27594
[Bug 1249134] Re: CoolBox CR-600 usb card reader fails with second and succesive card insertions
Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v3.12 kernel[0].
If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.
If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.
If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as "Confirmed".
Thanks in advance.
[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.12-saucy/
** Changed in: linux (Ubuntu)
Importance: Undecided => Medium
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1249134
Title:
CoolBox CR-600 usb card reader fails with second and succesive card
insertions
Status in “linux” package in Ubuntu:
New
Bug description:
The second and succesive insertions of cards fail, no matter if it's
the same again or a different one. So, I have to reboot the computer
in order to recover the normal automount behaviour.
When I first installed this device it was recognized by the kernel as
a remote controller. To get it working as a multi-card reader I had to
blacklist mceusb driver.
~~~~~~~~~~~~~~
Aditional info
~~~~~~~~~~~~~~
Ubuntu version:
12.04.3
Kernel:
Linux 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Card reader (commercial name):
CoolBox CR-600
lsusb:
Bus 001 Device 003: ID 0bda:0161 Realtek Semiconductor Corp. Mass Storage Device
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x0161 Mass Storage Device
bcdDevice 61.10
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 116
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 6
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.10 (Warning: Only accurate for version 1.0)
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 3750
dwMaxiumumClock 7500
bNumClockSupported 0
dwDataRate 10080 bps
dwMaxDataRate 312500 bps
bNumDataRatesSupp. 0
dwMaxIFSD 254
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 00010030
Auto clock change
Auto baud rate change
TPDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 8
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
usb-devices (after boot):
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=0161 Rev=61.10
S: Manufacturer=Generic
S: Product=USB2.0-CRW
S: SerialNumber=20070818000000000
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
usb-devices (after card insertion/extraction):
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=0161 Rev=61.10
S: Manufacturer=Generic
S: Product=USB2.0-CRW
S: SerialNumber=20070818000000000
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
modinfo usb_storage:
filename: /lib/modules/3.2.0-55-generic/kernel/drivers/usb/storage/usb-storage.ko
license: GPL
description: USB Mass Storage driver for Linux
author: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
srcversion: 10B205CD8F63479C5C1FB0D
depends:
intree: Y
vermagic: 3.2.0-55-generic SMP mod_unload modversions
parm: option_zero_cd:ZeroCD mode (1=Force Modem (default), 2=Allow CD-Rom (uint)
parm: swi_tru_install:TRU-Install mode (1=Full Logic (def), 2=Force CD-Rom, 3=Force Modem) (uint)
parm: delay_use:seconds to delay before using a new device (uint)
parm: quirks:supplemental list of device IDs and their quirks (string)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1249134/+subscriptions