kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #27620
[Bug 1249134] Card1.Codecs.codec.2.txt
apport information
** Attachment added: "Card1.Codecs.codec.2.txt"
https://bugs.launchpad.net/bugs/1249134/+attachment/3903418/+files/Card1.Codecs.codec.2.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1249134
Title:
CoolBox CR-600 usb card reader fails with second and succesive card
insertions
Status in “linux” package in Ubuntu:
Confirmed
Bug description:
The second and succesive insertions of cards fail, no matter if it's
the same again or a different one. So, I have to reboot the computer
in order to recover the normal automount behaviour.
When I first installed this device it was recognized by the kernel as
a remote controller. To get it working as a multi-card reader I had to
blacklist mceusb driver.
~~~~~~~~~~~~~~
Aditional info
~~~~~~~~~~~~~~
Ubuntu version:
12.04.3
Kernel:
Linux 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Card reader (commercial name):
CoolBox CR-600
lsusb:
Bus 001 Device 003: ID 0bda:0161 Realtek Semiconductor Corp. Mass Storage Device
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x0161 Mass Storage Device
bcdDevice 61.10
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 116
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 6
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.10 (Warning: Only accurate for version 1.0)
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 3750
dwMaxiumumClock 7500
bNumClockSupported 0
dwDataRate 10080 bps
dwMaxDataRate 312500 bps
bNumDataRatesSupp. 0
dwMaxIFSD 254
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 00010030
Auto clock change
Auto baud rate change
TPDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 8
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
usb-devices (after boot):
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=0161 Rev=61.10
S: Manufacturer=Generic
S: Product=USB2.0-CRW
S: SerialNumber=20070818000000000
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
usb-devices (after card insertion/extraction):
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=0161 Rev=61.10
S: Manufacturer=Generic
S: Product=USB2.0-CRW
S: SerialNumber=20070818000000000
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
modinfo usb_storage:
filename: /lib/modules/3.2.0-55-generic/kernel/drivers/usb/storage/usb-storage.ko
license: GPL
description: USB Mass Storage driver for Linux
author: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
srcversion: 10B205CD8F63479C5C1FB0D
depends:
intree: Y
vermagic: 3.2.0-55-generic SMP mod_unload modversions
parm: option_zero_cd:ZeroCD mode (1=Force Modem (default), 2=Allow CD-Rom (uint)
parm: swi_tru_install:TRU-Install mode (1=Full Logic (def), 2=Force CD-Rom, 3=Force Modem) (uint)
parm: delay_use:seconds to delay before using a new device (uint)
parm: quirks:supplemental list of device IDs and their quirks (string)
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.6
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: seth 2331 F.... pulseaudio
/dev/snd/controlC0: seth 2331 F.... pulseaudio
/dev/snd/pcmC0D0c: seth 2331 F...m pulseaudio
/dev/snd/pcmC0D0p: seth 2331 F...m pulseaudio
CRDA: Error: [Errno 2] No existe el archivo o el directorio
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xf6300000 irq 48'
Mixer name : 'Realtek ALC892'
Components : 'HDA:10ec0892,18491892,00100302'
Controls : 40
Simple ctrls : 19
Card1.Amixer.info:
Card hw:1 'NVidia'/'HDA NVidia at 0xf6080000 irq 17'
Mixer name : 'Nvidia GPU 11 HDMI/DP'
Components : 'HDA:10de0011,10de0101,00100100'
Controls : 24
Simple ctrls : 4
DistroRelease: Ubuntu 12.04
EcryptfsInUse: Yes
HibernationDevice: RESUME=UUID=615a848b-dd3e-4cb5-8636-a31e086b5346
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
MarkForUpload: True
NonfreeKernelModules: nvidia
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=es_ES.UTF-8
SHELL=/bin/bash
ProcFB:
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-55-generic root=/dev/mapper/hdd1-root ro quiet splash
ProcVersionSignature: Ubuntu 3.2.0-55.85-generic 3.2.51
RelatedPackageVersions:
linux-restricted-modules-3.2.0-55-generic N/A
linux-backports-modules-3.2.0-55-generic N/A
linux-firmware 1.79.7
RfKill:
StagingDrivers: mei
Tags: precise running-unity staging
Uname: Linux 3.2.0-55-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip disk lpadmin plugdev sambashare sudo vboxusers
dmi.bios.date: 05/07/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P2.10
dmi.board.name: Z68 Pro3
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.10:bd05/07/2012:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ68Pro3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1249134/+subscriptions
