kernel-packages team mailing list archive

[Rainer <1164557@xxxxxxxxxxxxxxxxxx>]

apport information

** Attachment added: "ProcInterrupts.txt"
   https://bugs.launchpad.net/bugs/1164557/+attachment/3904106/+files/ProcInterrupts.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1164557

Title:
  Laptop to hot - VID to high

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  My laptop goes to very hign temperature. First I think it was a fan
  problem. I adjusted thinkfan to use the disengaded option. Now my fan
  ist at maximim speed if the temperature goes over 67°C. But still it
  is not possible to run the laptop for a longer time an 100% CPU. It
  then overheats and stops working. For example just after clamscan
  starts working the fan is at maximum speed (5600 revolutions) and the
  tempurature goes up over 85°C, the CPU usage is the about 70%.

  My standard governer is "ondemand". By using "powersave" the temparure
  will be about 5-10°C decrease.

  My investigation show me that in my oppinum the VID is to high. To varify this i do the following:
  -  rdmsr -p0 [1] 0x0199 for every speed steps
  -  the governer "ondemand" switches the MSR 0x199 between
     - 0x0613, which means 1GHz and 1.275V? 
     - 0x081c, which means 1,33GHz and 1.3875V?
     - 0x0b28, which means 1,83GHz and 1.5375V?
  > by 100% CPU the laptop overheats and stops

  - set the governer to userspace 1.833GHz
  - reduce the VID using: wrmsr -p0 [1] 0x0199 0x0b20
  > the temparature goes not over 65°C by starting load that goes to 100% CPU!.

  I see that the VID is allways set to 0x0b28 when the governer change
  the speed to the highest speed. I don't know if the governer or an
  other kernel module set the VID The Sped (FID) is selected by the
  governer.

  The FID/VID vor maximum should be set to 0x0b20 instead 0x0B28 and
  every thing would fine.

  Here are some infos about my system:

  It is a lenovo Thinkpad R60

  rainer@BN591-LINUX:~$ sudo lshw -C display; uname -a; lsb_release -a
    *-display               
         description: VGA compatible controller
         product: Radeon Mobility X1400
         vendor: Hynix Semiconductor (Hyundai Electronics)
         physical id: 0
         bus info: pci@0000:01:00.0
         version: 00
         width: 32 bits
         clock: 33MHz
         capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
         configuration: driver=radeon latency=0
         resources: irq:16 memory:d8000000-dfffffff ioport:2000(size=256) memory:ee000000-ee00ffff memory:ee020000-ee03ffff
  Linux BN591-LINUX 3.2.0-40-generic-pae #64-Ubuntu SMP Mon Mar 25 21:44:41 UTC 2013 i686 i686 i386 GNU/Linux
  No LSB modules are available.
  Distributor ID:	Ubuntu
  Description:	Ubuntu 12.04.2 LTS
  Release:	12.04
  Codename:	precise
  rainer@BN591-LINUX:~$
  --- 
  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: i386
  DistroRelease: Ubuntu 12.04
  MarkForUpload: True
  Package: linux (not installed)
  Tags:  precise
  Uname: Linux 3.9.0-030900rc5-generic i686
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: Upgraded to precise on 2012-12-12 (113 days ago)
  UserGroups: adm admin audio avahi avahi-autoipd backup cdrom chipcard crontab daemon dialout dip disk fax floppy fuse gammu gdm gnokii gnumed gsmsms haldaemon libuuid list lp lpadmin mail man messagebus mlocate mysql mythtv netdev ntp nvram operator plugdev polkituser postgres powerdev root rtkit sambashare scanner shadow smsd src ssh ssl-cert sudo sys syslog tape tty users utempter utmp uucp vboxusers vdr video voice www-data
  --- 
  ApportVersion: 2.12.6-0ubuntu1
  Architecture: i386
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu     3165 F.... pulseaudio
  CasperVersion: 1.336ubuntu1
  CurrentDmesg:
   [   71.182993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
   [   71.185122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
   [   71.982542] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
   [   72.055058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
   [   72.055518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  DistroRelease: Ubuntu 14.04
  LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20131108)
  MachineType: LENOVO 9461DXG
  MarkForUpload: True
  Package: linux (not installed)
  PccardctlIdent:
   Socket 0:
     no product info available
  PccardctlStatus:
   Socket 0:
     no card
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.12.0-2.5-generic 3.12.0
  RelatedPackageVersions:
   linux-restricted-modules-3.12.0-2-generic N/A
   linux-backports-modules-3.12.0-2-generic  N/A
   linux-firmware                            1.117
  Tags:  trusty
  Uname: Linux 3.12.0-2-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 08/28/2009
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 7CETD3WW (2.23 )
  dmi.board.name: 9461DXG
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: dmi:bvnLENOVO:bvr7CETD3WW(2.23):bd08/28/2009:svnLENOVO:pn9461DXG:pvrThinkPadR60:rvnLENOVO:rn9461DXG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 9461DXG
  dmi.product.version: ThinkPad R60
  dmi.sys.vendor: LENOVO
  --- 
  ApportVersion: 2.12.6-0ubuntu1
  Architecture: i386
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu     3165 F.... pulseaudio
  CasperVersion: 1.336ubuntu1
  CurrentDmesg:
   [   71.182993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
   [   71.185122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
   [   71.982542] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
   [   72.055058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
   [   72.055518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  DistroRelease: Ubuntu 14.04
  LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20131108)
  MachineType: LENOVO 9461DXG
  MarkForUpload: True
  Package: linux (not installed)
  PccardctlIdent:
   Socket 0:
     no product info available
  PccardctlStatus:
   Socket 0:
     no card
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.12.0-2.5-generic 3.12.0
  RelatedPackageVersions:
   linux-restricted-modules-3.12.0-2-generic N/A
   linux-backports-modules-3.12.0-2-generic  N/A
   linux-firmware                            1.117
  Tags:  trusty
  Uname: Linux 3.12.0-2-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 08/28/2009
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 7CETD3WW (2.23 )
  dmi.board.name: 9461DXG
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: dmi:bvnLENOVO:bvr7CETD3WW(2.23):bd08/28/2009:svnLENOVO:pn9461DXG:pvrThinkPadR60:rvnLENOVO:rn9461DXG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 9461DXG
  dmi.product.version: ThinkPad R60
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions