← Back to team overview

kernel-packages team mailing list archive

[Bug 1049466] Re: Need support of Ralink RT3290 wifi support

 

I have the problem with excessive TX retries and "invalid misc" high
rate. Connect to AP, connected a minute mostly, then disconnect. dmesg
log:

'''
[ 1864.727785] rt2800pci 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1864.727864] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 1864.731584] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 1864.731801] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[ 1873.095306] r8169 0000:05:00.0 eth0: link down
[ 1873.095393] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1873.105224] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 1873.105264] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 1873.153562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1873.154278] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1873.246609] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.310354] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.374471] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.438536] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.502587] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.566710] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.630639] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.694804] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.758890] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.823006] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.887090] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.987241] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1873.988072] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1874.051178] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1874.052100] ieee80211 phy3: rt2800pci_txdone: Warning - Got TX status for an empty queue 0, dropping
[ 1874.656017] wlan0: authenticate with 00:8c:54:4d:31:e4
[ 1874.671157] wlan0: send auth to 00:8c:54:4d:31:e4 (try 1/3)
[ 1874.672625] wlan0: authenticated
[ 1874.675013] wlan0: associate with 00:8c:54:4d:31:e4 (try 1/3)
[ 1874.678024] wlan0: RX AssocResp from 00:8c:54:4d:31:e4 (capab=0x411 status=0 aid=13)
[ 1874.678177] wlan0: associated
[ 1874.678779] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1874.679102] cfg80211: Calling CRDA for country: LT
[ 1874.683604] cfg80211: Regulatory domain changed to country: LT
[ 1874.683610] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1874.683614] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1874.683616] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1874.683619] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1874.683621] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 1874.683623] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 2085.205428] wlan0: authentication with 00:8c:54:4d:31:e4 timed out
[ 2085.381696] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2085.541812] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2085.702022] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2085.862192] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2086.022357] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2086.182584] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2087.055558] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2087.215723] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2087.443974] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2087.604168] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2087.764359] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2087.924536] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2088.797523] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2088.957754] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
'''

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-firmware in Ubuntu.
https://bugs.launchpad.net/bugs/1049466

Title:
  Need support of Ralink RT3290 wifi support

Status in “linux” package in Ubuntu:
  Confirmed
Status in “linux-firmware” package in Ubuntu:
  Fix Released
Status in “linux” source package in Precise:
  Invalid
Status in “linux-firmware” source package in Precise:
  Fix Released
Status in “linux” source package in Quantal:
  Invalid
Status in “linux-firmware” source package in Quantal:
  Won't Fix
Status in “linux” source package in Raring:
  Fix Released
Status in “linux-firmware” source package in Raring:
  Fix Released
Status in “linux” package in Baltix:
  Opinion
Status in “linux” package in Gentoo Linux:
  New

Bug description:
  RT3290 wifi chip is becoming common on consumer notebooks. Its support
  starts from 3.6 so support on 12.10 may need lbm-cw.

  commit a89534edaaa7008992b878680490e9b02a665563
  Author: Woody Hung <Woody.Hung@xxxxxxxxxxxx>
  Date:   Wed Jun 13 15:01:16 2012 +0800

      rt2x00 : RT3290 chip support v4
      
      This patch support the new chipset rt3290 wifi implementation in rt2x00.
      It initailize the related mac, bbp and rf register in startup phase.
      And this patch modify the efuse read/write method for the different efuse data offset of rt3290.
      
      Signed-off-by: Woody Hung <Woody.Hung@xxxxxxxxxxxx>
      Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1049466/+subscriptions