kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #29837
[Bug 1252462] UdevDb.txt
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1252462/+attachment/3912069/+files/UdevDb.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1252462
Title:
CPU turbo mode frequency issue with Kernel 3.11 under Saucy 13.10
(Intel I7)
Status in “linux” package in Ubuntu:
Confirmed
Bug description:
Hi,
I am opening this bug because i'm suspecting my processor not to run
under good frequencies under 13.10 with default kernel 3.11.
My computer is an Asus UX52VS running in Intel i7: Intel Core i7-3537U
(See http://www.cpu-world.com/CPUs/Core_i7/Intel-
Core%20i7-3537U%20Mobile%20processor%20-%20AV8063801119700.html)
It's normal frequency is 2 Ghz with a turbo mode up to 2,9 Ghz in case
of CPU Load.
When running Kernel 3.11, cpufreq-info gives me following
informations:
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@xxxxxxxxxxxxxxx, please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 775 MHz - 2.50 GHz
available frequency steps: 2.50 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 800 MHz, 775 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 775 MHz and 2.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 2.50 GHz (asserted by call to hardware).
cpufreq stats: 2.50 GHz:-nan%, 2.50 GHz:-nan%, 2.40 GHz:-nan%, 2.20 GHz:-nan%, 2.10 GHz:-nan%, 2.00 GHz:-nan%, 1.90 GHz:-nan%, 1.70 GHz:-nan%, 1.60 GHz:-nan%, 1.50 GHz:-nan%, 1.30 GHz:-nan%, 1.20 GHz:-nan%, 1.10 GHz:-nan%, 1000 MHz:-nan%, 800 MHz:-nan%, 775 MHz:-nan% (582)
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 775 MHz - 2.50 GHz
available frequency steps: 2.50 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 800 MHz, 775 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 775 MHz and 2.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 2.50 GHz (asserted by call to hardware).
cpufreq stats: 2.50 GHz:-nan%, 2.50 GHz:-nan%, 2.40 GHz:-nan%, 2.20 GHz:-nan%, 2.10 GHz:-nan%, 2.00 GHz:-nan%, 1.90 GHz:-nan%, 1.70 GHz:-nan%, 1.60 GHz:-nan%, 1.50 GHz:-nan%, 1.30 GHz:-nan%, 1.20 GHz:-nan%, 1.10 GHz:-nan%, 1000 MHz:-nan%, 800 MHz:-nan%, 775 MHz:-nan% (958)
analyzing CPU 2:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 2
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 10.0 us.
hardware limits: 775 MHz - 2.50 GHz
available frequency steps: 2.50 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 800 MHz, 775 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 775 MHz and 2.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 2.50 GHz (asserted by call to hardware).
cpufreq stats: 2.50 GHz:-nan%, 2.50 GHz:-nan%, 2.40 GHz:-nan%, 2.20 GHz:-nan%, 2.10 GHz:-nan%, 2.00 GHz:-nan%, 1.90 GHz:-nan%, 1.70 GHz:-nan%, 1.60 GHz:-nan%, 1.50 GHz:-nan%, 1.30 GHz:-nan%, 1.20 GHz:-nan%, 1.10 GHz:-nan%, 1000 MHz:-nan%, 800 MHz:-nan%, 775 MHz:-nan% (439)
analyzing CPU 3:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 3
CPUs which need to have their frequency coordinated by software: 3
maximum transition latency: 10.0 us.
hardware limits: 775 MHz - 2.50 GHz
available frequency steps: 2.50 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 800 MHz, 775 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 775 MHz and 2.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 2.00 GHz (asserted by call to hardware).
cpufreq stats: 2.50 GHz:-nan%, 2.50 GHz:-nan%, 2.40 GHz:-nan%, 2.20 GHz:-nan%, 2.10 GHz:-nan%, 2.00 GHz:-nan%, 1.90 GHz:-nan%, 1.70 GHz:-nan%, 1.60 GHz:-nan%, 1.50 GHz:-nan%, 1.30 GHz:-nan%, 1.20 GHz:-nan%, 1.10 GHz:-nan%, 1000 MHz:-nan%, 800 MHz:-nan%,
I don't understand why "frequency should be within 775 MHz and 2.00 GHz." ?
As far as i can see with various tools, the current frequency nevers
goes up to 2 Ghz which is far away from the turbo hardware limit...
Another tool says almost the same:
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 775 MHz - 2.50 GHz
available frequency steps: 2.50 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 800 MHz, 775 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 775 MHz and 2.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.60 GHz.
cpufreq stats: 2.50 GHz:-nan%, 2.50 GHz:-nan%, 2.40 GHz:-nan%, 2.20 GHz:-nan%, 2.10 GHz:-nan%, 2.00 GHz:-nan%, 1.90 GHz:-nan%, 1.70 GHz:-nan%, 1.60 GHz:-nan%, 1.50 GHz:-nan%, 1.30 GHz:-nan%, 1.20 GHz:-nan%, 1.10 GHz:-nan%, 1000 MHz:-nan%, 800 MHz:-nan%, 775 MHz:-nan% (3159)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Running under very high CPU load, i can see using turbostat:
cor CPU %c0 GHz TSC SMI %c1 %c3 %c6 %c7 CTMP PTMP %pc2 %pc3 %pc6 %pc7 Pkg_W Cor_W GFX_W
84.87 2.88 2.49 0 15.13 0.00 0.00 0.00 84 84 0.00 0.00 0.00 0.00 16.07 11.10 0.19
0 0 78.49 2.88 2.50 0 21.51 0.00 0.00 0.00 81 84 0.00 0.00 0.00 0.00 16.07 11.10 0.19
0 2 88.18 2.88 2.50 0 11.81
1 1 80.60 2.88 2.49 0 19.40 0.00 0.00 0.00 84
1 3 92.23 2.88 2.49 0 7.77
cor CPU %c0 GHz TSC SMI %c1 %c3 %c6 %c7 CTMP PTMP %pc2 %pc3 %pc6 %pc7 Pkg_W Cor_W GFX_W
85.58 2.89 2.49 0 14.39 0.03 0.00 0.00 84 84 0.00 0.00 0.00 0.00 16.20 11.25 0.17
0 0 92.59 2.89 2.49 0 7.36 0.05 0.00 0.00 82 84 0.00 0.00 0.00 0.00 16.20 11.25 0.17
0 2 78.25 2.89 2.49 0 21.70
1 1 85.93 2.89 2.49 0 14.07 0.00 0.00 0.00 84
1 3 85.56 2.89 2.49 0 14.44
cor CPU %c0 GHz TSC SMI %c1 %c3 %c6 %c7 CTMP PTMP %pc2 %pc3 %pc6 %pc7 Pkg_W Cor_W GFX_W
84.59 2.89 2.49 0 15.41 0.00 0.00 0.00 83 83 0.00 0.00 0.00 0.00 16.01 11.14 0.11
0 0 95.59 2.89 2.49 0 4.41 0.00 0.00 0.00 81 83 0.00 0.00 0.00 0.00 16.01 11.14 0.11
0 2 62.31 2.88 2.49 0 37.69
1 1 87.46 2.89 2.49 0 12.54 0.00 0.00 0.00 83
1 3 93.02 2.89 2.49 0 6.98
But, when using the last Kernel 3.12 (rc7) revision what i see is completely different!
With running kernel 3.12:
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@xxxxxxxxxxxxxxx, please.
analyzing CPU 0:
driver: intel_pstate
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 0.97 ms.
hardware limits: 800 MHz - 3.10 GHz
available cpufreq governors: performance, powersave
current policy: frequency should be within 800 MHz and 3.10 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency is 2.90 GHz (asserted by call to hardware).
analyzing CPU 1:
driver: intel_pstate
CPUs which run at the same hardware frequency: 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 0.97 ms.
hardware limits: 800 MHz - 3.10 GHz
available cpufreq governors: performance, powersave
current policy: frequency should be within 800 MHz and 3.10 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency is 2.90 GHz (asserted by call to hardware).
analyzing CPU 2:
driver: intel_pstate
CPUs which run at the same hardware frequency: 2
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 0.97 ms.
hardware limits: 800 MHz - 3.10 GHz
available cpufreq governors: performance, powersave
current policy: frequency should be within 800 MHz and 3.10 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency is 2.90 GHz (asserted by call to hardware).
analyzing CPU 3:
driver: intel_pstate
CPUs which run at the same hardware frequency: 3
CPUs which need to have their frequency coordinated by software: 3
maximum transition latency: 0.97 ms.
hardware limits: 800 MHz - 3.10 GHz
available cpufreq governors: performance, powersave
current policy: frequency should be within 800 MHz and 3.10 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency is 2.90 GHz (asserted by call to hardware).
As you can see the 2 kernels does not seem to use the same driver, intel_pstate for Kernel 3.12 and acpi-cpufreq for Kernel 3.11.
Reported speed are correct for Kernel 3.12 and the system works much
better and more fluent, i can really feal the difference.
Frequency tools report a good frequency, going up to 3 Ghz under high CPU Load. (under Kernel 3.12 i can't use turbostat, gives me an error :
turbostat not found for kernel 3.12.0-031200rc7
You may need to install linux-tools-3.12.0-031200rc7-generic
)
So what does that mean ?
Is a 3.11 kernel unable to manage correctly that kind of processor ? Anything else to do to correct that ?
Many people have that kind of modern processor in recent laptops, i
guess many shall be interested in...
Thank you in advance for your help !
---
ApportVersion: 2.12.5-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: guilhem 2323 F.... pulseaudio
DistroRelease: Ubuntu 13.10
HibernationDevice: RESUME=UUID=167b604e-be33-4115-84e6-f8956fea9fac
InstallationDate: Installed on 2013-11-18 (0 days ago)
InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1)
MachineType: ASUSTeK COMPUTER INC. UX52VS
MarkForUpload: True
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=3c164fba-bc7c-4e5f-b716-4006086b4efd ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.11.0-13.20-generic 3.11.6
RelatedPackageVersions:
linux-restricted-modules-3.11.0-13-generic N/A
linux-backports-modules-3.11.0-13-generic N/A
linux-firmware 1.116
Tags: saucy
Uname: Linux 3.11.0-13-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers
dmi.bios.date: 10/25/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: UX52VS.202
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: UX52VS
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX52VS.202:bd10/25/2012:svnASUSTeKCOMPUTERINC.:pnUX52VS:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX52VS:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
dmi.product.name: UX52VS
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1252462/+subscriptions
