← Back to team overview

kernel-packages team mailing list archive

[Bug 1249979] Re: r8169 Ethernet driver doesn't work


Cocodude, ok. Given the fix is available in mainline, could you please
confirm this issue exists with the latest development release of Ubuntu?
ISO images are available from http://cdimage.ubuntu.com/daily-
live/current/ . If the issue remains, could you please just make a
comment to this.

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.

  r8169 Ethernet driver doesn't work

Status in “linux” package in Ubuntu:

Bug description:
  Following an upgrade from 13.04 to 13.10, gigabit card stopped working
  (100Mbps ethernet working fine on the motherboard still - KN9 Ultra).

  dmesg gives a load of warnings "r8169 0000:01:0a.0 eth0:
  rtl_phyar_cond == 0 (loop: 20, delay: 25)." and when rmmodding r8169
  and modprobing it, I get:

  [  125.198865] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  [  125.199151] r8169 0000:01:0a.0 (unregistered net_device): not PCI Express
  [  125.199669] r8169 0000:01:0a.0 eth0: RTL8169sb/8110sb at 0xffffc90000c5a000, 00:21:27:c9:5f:cf, XID 10000000 IRQ 18
  [  125.199677] r8169 0000:01:0a.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
  [  125.231623] r8169 0000:01:0a.0 eth0: link down
  [  125.233790] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [  125.240366] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

  Plugging out and then in the cable makes no difference.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-13-generic 3.11.0-13.20
  ProcVersionSignature: Ubuntu 3.11.0-13.20-generic 3.11.6
  Uname: Linux 3.11.0-13-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.12.5-0ubuntu2.1
  Architecture: amd64
   /dev/snd/controlC0:  marc       2150 F.... pulseaudio
   /dev/snd/controlC1:  marc       2150 F.... pulseaudio
  Date: Mon Nov 11 08:19:31 2013
  InstallationDate: Installed on 2013-05-22 (172 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
   eth0      no wireless extensions.
   eth1      no wireless extensions.
   lo        no wireless extensions.
   Bus 001 Device 002: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 003: ID 07b8:b02a AboCom Systems Inc AboCom Bluetooth Device
   Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: System Manufacter System Product Name
  MarkForUpload: True
   PATH=(custom, no user)
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=40b9b3ca-79bd-43f1-a717-cc700a47acad ro bootdegraded=true quiet splash
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
   linux-restricted-modules-3.11.0-13-generic N/A
   linux-backports-modules-3.11.0-13-generic  N/A
   linux-firmware                             1.116
   0: hci0: Bluetooth
   	Soft blocked: no
   	Hard blocked: no
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-11-07 (3 days ago)
  dmi.bios.date: 11/19/2007
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: KN9(NF-MCP55 series)
  dmi.board.vendor: http://www.abit.com.tw/
  dmi.board.version: 1.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: System Enclosure Manufacter
  dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd11/19/2007:svnSystemManufacter:pnSystemProductName:pvrSystemVersion:rvnhttp//www.abit.com.tw/:rnKN9(NF-MCP55series):rvr1.x:cvnSystemEnclosureManufacter:ct3:cvr:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System Manufacter

To manage notifications about this bug go to: