kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #34484
[Bug 713480] Re: Atheros AR5001: Wireless connection is not working any longer
wirelessbit, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/713480/comments/51
regarding this being fixed with an update. For future reference you can
manage the status of your own bugs by clicking on the current status in
the yellow line and then choosing a new status in the revealed drop down
box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.
** Tags added: needs-full-computer-modl
** Tags removed: needs-full-computer-modl
** Tags added: needs-full-computer-model
** Changed in: linux (Ubuntu)
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/713480
Title:
Atheros AR5001: Wireless connection is not working any longer
Status in The Linux Kernel:
Expired
Status in “linux” package in Ubuntu:
Invalid
Bug description:
When I run:
dmesg |grep -e wlan -e ath
[ 0.852389] device-mapper: multipath: version 1.1.1 loaded
[ 0.852392] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 11.230197] ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
[ 11.230211] ath5k 0000:07:00.0: setting latency timer to 64
[ 11.230259] ath5k 0000:07:00.0: registered as 'phy0'
[ 11.833767] ath: EEPROM regdomain: 0x64
[ 11.833771] ath: EEPROM indicates we should expect a direct regpair map
[ 11.833776] ath: Country alpha2 being used: 00
[ 11.833778] ath: Regpair used: 0x64
[ 12.680651] Registered led device: ath5k-phy0::rx
[ 12.680669] Registered led device: ath5k-phy0::tx
[ 12.680673] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 467.689901] ath5k 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3010.388786] ath5k 0000:07:00.0: PCI INT A disabled
sudo dmesg |grep -e wlan -e ath
[ 0.852389] device-mapper: multipath: version 1.1.1 loaded
[ 0.852392] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 11.230197] ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
[ 11.230211] ath5k 0000:07:00.0: setting latency timer to 64
[ 11.230259] ath5k 0000:07:00.0: registered as 'phy0'
[ 11.833767] ath: EEPROM regdomain: 0x64
[ 11.833771] ath: EEPROM indicates we should expect a direct regpair map
[ 11.833776] ath: Country alpha2 being used: 00
[ 11.833778] ath: Regpair used: 0x64
[ 12.680651] Registered led device: ath5k-phy0::rx
[ 12.680669] Registered led device: ath5k-phy0::tx
[ 12.680673] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 467.689901] ath5k 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3010.388786] ath5k 0000:07:00.0: PCI INT A disabled
sudo modprobe ath5k
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
sudo modprobe -r -f ath5k
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
mel@PORTABLE:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: MCP77 Ethernet
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:0a.0
logical name: eth0
version: a2
serial: 00:1f:16:d5:b2:a1
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.2.7 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100MB/s
resources: irq:42 memory:c0009000-c0009fff ioport:30f8(size=8) memory:c0007c00-c0007cff memory:c0007800-c000780f
*-network UNCLAIMED
description: Ethernet controller
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:07:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix cap_list
configuration: latency=0
resources: memory:c2000000-c200ffff
sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
I have tried other recommendations from the forums but still the wireless is not working.
I have also tried the white and black list and still not working. And for the unnecessary question "is the wireless one?" Yes it is.
If I want to deal with so many issues I would of state with Windows in
stead. Ubuntu used to be reliable but the last two releases are
becoming very buggy.
I have also read that this is an old bug but hasn't been fixed. Any
one with a recommendation? Hopefully a patch will be release to fix
the issue for good.
Thank you.
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: mel 2230 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 19'
Mixer name : 'Nvidia MCP77/78 HDMI'
Components : 'HDA:14f15051,103c360a,00100000 HDA:10de0002,10de0101,00100000'
Controls : 18
Simple ctrls : 8
DistroRelease: Ubuntu 10.10
HibernationDevice: RESUME=UUID=548e8477-2134-4671-bc41-b8b058244f5a
InstallationMedia: Kubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100427)
Lsusb:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Hewlett-Packard Compaq Presario CQ60 Notebook PC
NonfreeKernelModules: nvidia
Package: linux (not installed)
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=e294c3e7-aa01-46b5-b4b0-9ef69c64acde ro quiet splash
ProcEnviron:
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.35-28.49-generic 2.6.35.11
Regression: No
RelatedPackageVersions: linux-firmware 1.38.5
Reproducible: Yes
Tags: maverick kernel-uncat needs-upstream-testing
Uname: Linux 2.6.35-28-generic i686
UserGroups:
WifiSyslog:
Mar 12 18:42:10 PORTABLE kernel: [ 4234.499605] ptrace of non-child pid 6080 was attempted by: firefox-bin (pid 6079)
Mar 12 18:42:10 PORTABLE kernel: [ 4234.499610] ptrace of non-child pid 6081 was attempted by: firefox-bin (pid 6079)
Mar 12 18:42:10 PORTABLE kernel: [ 4234.499614] ptrace of non-child pid 28108 was attempted by: firefox-bin (pid 6079)
Mar 12 18:42:10 PORTABLE kernel: [ 4234.499617] ptrace of non-child pid 28109 was attempted by: firefox-bin (pid 6079)
dmi.bios.date: 05/20/2009
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.3C
dmi.board.name: 303C
dmi.board.vendor: Wistron
dmi.board.version: 08.54
dmi.chassis.type: 10
dmi.chassis.vendor: Wistron
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.3C:bd05/20/2009:svnHewlett-Packard:pnCompaqPresarioCQ60NotebookPC:pvrF.3C:rvnWistron:rn303C:rvr08.54:cvnWistron:ct10:cvrN/A:
dmi.product.name: Compaq Presario CQ60 Notebook PC
dmi.product.version: F.3C
dmi.sys.vendor: Hewlett-Packard
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: mel 2100 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 20'
Mixer name : 'Nvidia MCP77/78 HDMI'
Components : 'HDA:14f15051,103c360a,00100000 HDA:10de0002,10de0101,00100000'
Controls : 18
Simple ctrls : 8
DistroRelease: Ubuntu 10.10
HibernationDevice: RESUME=UUID=548e8477-2134-4671-bc41-b8b058244f5a
InstallationMedia: Kubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100427)
Lsusb:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Hewlett-Packard Compaq Presario CQ60 Notebook PC
NonfreeKernelModules: nvidia
Package: linux (not installed)
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=e294c3e7-aa01-46b5-b4b0-9ef69c64acde ro quiet splash
ProcEnviron:
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11
Regression: No
RelatedPackageVersions: linux-firmware 1.38.5
Reproducible: Yes
Tags: maverick kernel-net needs-upstream-testing
Uname: Linux 2.6.35-28-generic i686
UserGroups:
dmi.bios.date: 05/20/2009
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.3C
dmi.board.name: 303C
dmi.board.vendor: Wistron
dmi.board.version: 08.54
dmi.chassis.type: 10
dmi.chassis.vendor: Wistron
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.3C:bd05/20/2009:svnHewlett-Packard:pnCompaqPresarioCQ60NotebookPC:pvrF.3C:rvnWistron:rn303C:rvr08.54:cvnWistron:ct10:cvrN/A:
dmi.product.name: Compaq Presario CQ60 Notebook PC
dmi.product.version: F.3C
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/713480/+subscriptions