kernel-packages team mailing list archive

[boblinux <1258919@xxxxxxxxxxxxxxxxxx>]

Finally : gosh, I am stupid ! I was searching the quirks file for the
Deskjet 710C ! of course there is an entry for the PL2305 chip !

Now, I ran various tests as you requested : I did not try "blacklist"
nor "usb-init" (I don't have any vendor string) nor "vendor-class" (I am
not sure I understand what this means) nor "whitelist". I list below the
various tests I ran : in short : the result is, sadly, always the same,
as if the line for the PL2305 chip was not taken into account at all.

What can we do now ?

Tests and their results:
---------------------------

all disabled :
# Prolific Technology, Inc. PL2305 Parallel Port (USB -> Parallel adapter), https://bugs.launchpad.net/bugs/987485
#0x067b 0x2305 no-reattach soft-reset unidir

service cups restart
lp lines.ps => printing stops at line #54 (no change)

=========

# Prolific Technology, Inc. PL2305 Parallel Port (USB -> Parallel adapter), https://bugs.launchpad.net/bugs/987485
#0x067b 0x2305 no-reattach soft-reset unidir
0x067b 0x2305 no-reattach

service cups restart
lp lines.ps => printing stops at line #54 (no change) (no kidding :-(

=========

# Prolific Technology, Inc. PL2305 Parallel Port (USB -> Parallel adapter), https://bugs.launchpad.net/bugs/987485
#0x067b 0x2305 no-reattach soft-reset unidir
0x067b 0x2305 soft-reset

service cups restart
lp lines.ps => printing stops at line #54 (no change)

=========

# Prolific Technology, Inc. PL2305 Parallel Port (USB -> Parallel adapter), https://bugs.launchpad.net/bugs/987485
#0x067b 0x2305 no-reattach soft-reset unidir
0x067b 0x2305 unidir

service cups restart
lp lines.ps => printing stops at line #54 (no change)

=========

# Prolific Technology, Inc. PL2305 Parallel Port (USB -> Parallel adapter), https://bugs.launchpad.net/bugs/987485
#0x067b 0x2305 no-reattach soft-reset unidir
0x067b 0x2305 no-reattach soft-reset

service cups restart
lp lines.ps => printing stops at line #54 (no change)

=========

# Prolific Technology, Inc. PL2305 Parallel Port (USB -> Parallel adapter), https://bugs.launchpad.net/bugs/987485
#0x067b 0x2305 no-reattach soft-reset unidir
0x067b 0x2305 no-reattach unidir

service cups restart
lp lines.ps => printing stops at line #54 (no change)

=========

# Prolific Technology, Inc. PL2305 Parallel Port (USB -> Parallel adapter), https://bugs.launchpad.net/bugs/987485
#0x067b 0x2305 no-reattach soft-reset unidir
0x067b 0x2305 soft-reset unidir

service cups restart
lp lines.ps => printing stops at line #54 (no change)

** Attachment added: "lines.ps"
   https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258919/+attachment/3934800/+files/lines.ps

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1258919

Title:
  067b:2305 printing issue with parallel-to-usb adapter

Status in “cups” package in Ubuntu:
  Incomplete
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I have an old HP Deskjet 710C parallel printer. I really don't print a lot, so it ages well. I just replaced my former desktop with a new barebone without parallel port - no space to embed a PCI  IEEE 1284 adapter. So I just bought a cable which is a parallel-to-usb adapter : it is a Sweex adapter, the kernel recognizes it as :
  Prolific Technology, Inc. PL2305 Parallel Port

  I configured cups to use this new adapter, with the same old pnm2ppa
  driver. When I try to print a test page from cups (or other printings)
  it goes well, until close to the end, when the printing suddenly
  stops, without the sheet being released : I have to power off the
  printer, which as a side effect triggers the sheet ejection before
  power off. I read various articles and forums on this topic before
  posting. Playing with usblp, kernel blacklists and /dev/usb/lp0 does
  not solve anything. I wanted to be sure that it was not the Prolific
  controller which was flawed. So I connected it to a windows 7 virtual
  machine into Virtualbox; Windows installed various drivers, and
  eventually various printings ran seamlessly - without my issue on
  GNU/Linux. So my conclusion is that the controller is ok. I also just
  tested mainline kernel http://kernel.ubuntu.com/~kernel-
  ppa/mainline/v3.13-rc3-trusty/linux-
  image-3.13.0-031300rc3-generic_3.13.0-031300rc3.201312061335_amd64.deb
  . No improvement, my test page stops being printed at the same spot
  close to the end. So I can assume that there is a bug in the
  controller's driver. Best regards R. Grasso

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image (not installed)
  ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7
  Uname: Linux 3.11.0-14-generic x86_64
  ApportVersion: 2.12.5-0ubuntu2.1
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D3', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
  Date: Sun Dec  8 13:53:43 2013
  HibernationDevice: RESUME=UUID=a16e3a2c-0f38-4e72-9c51-145a864b60a1
  InstallationDate: Installed on 2013-11-06 (32 days ago)
  InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1)
  MachineType: Shuttle Inc. DS47D
  MarkForUpload: True
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic root=UUID=8c51cecc-9054-4edc-8b06-afb7bb4ebd2e ro
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-14-generic N/A
   linux-backports-modules-3.11.0-14-generic  N/A
   linux-firmware                             1.116
  RfKill:
   0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/09/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1.03
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: FS47D
  dmi.board.vendor: Shuttle Inc.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 10
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.03:bd08/09/2013:svnShuttleInc.:pnDS47D:pvrV1.0:rvnShuttleInc.:rnFS47D:rvr1.0:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.:
  dmi.product.name: DS47D
  dmi.product.version: V1.0
  dmi.sys.vendor: Shuttle Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1258919/+subscriptions