← Back to team overview

kernel-packages team mailing list archive

[Bug 1249979] Re: r8169 Ethernet driver doesn't work

 

** Description changed:

+ UPDATE: This is most likely fixed in 14.04, but it likely to remain non-
+ functional in 13.10.
+ 
  Following an upgrade from 13.04 to 13.10, gigabit card stopped working
  (100Mbps ethernet working fine on the motherboard still - KN9 Ultra).
  
  dmesg gives a load of warnings "r8169 0000:01:0a.0 eth0: rtl_phyar_cond
  == 0 (loop: 20, delay: 25)." and when rmmodding r8169 and modprobing it,
  I get:
  
  [  125.198865] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  [  125.199151] r8169 0000:01:0a.0 (unregistered net_device): not PCI Express
  [  125.199669] r8169 0000:01:0a.0 eth0: RTL8169sb/8110sb at 0xffffc90000c5a000, 00:21:27:c9:5f:cf, XID 10000000 IRQ 18
  [  125.199677] r8169 0000:01:0a.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
  [  125.231623] r8169 0000:01:0a.0 eth0: link down
  [  125.233790] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [  125.240366] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  
  Plugging out and then in the cable makes no difference.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-13-generic 3.11.0-13.20
  ProcVersionSignature: Ubuntu 3.11.0-13.20-generic 3.11.6
  Uname: Linux 3.11.0-13-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.12.5-0ubuntu2.1
  Architecture: amd64
  AudioDevicesInUse:
-  USER        PID ACCESS COMMAND
-  /dev/snd/controlC0:  marc       2150 F.... pulseaudio
-  /dev/snd/controlC1:  marc       2150 F.... pulseaudio
+  USER        PID ACCESS COMMAND
+  /dev/snd/controlC0:  marc       2150 F.... pulseaudio
+  /dev/snd/controlC1:  marc       2150 F.... pulseaudio
  Date: Mon Nov 11 08:19:31 2013
  InstallationDate: Installed on 2013-05-22 (172 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  IwConfig:
-  eth0      no wireless extensions.
-  
-  eth1      no wireless extensions.
-  
-  lo        no wireless extensions.
+  eth0      no wireless extensions.
+ 
+  eth1      no wireless extensions.
+ 
+  lo        no wireless extensions.
  Lsusb:
-  Bus 001 Device 002: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
-  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-  Bus 002 Device 003: ID 07b8:b02a AboCom Systems Inc AboCom Bluetooth Device
-  Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
-  Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
+  Bus 001 Device 002: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
+  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
+  Bus 002 Device 003: ID 07b8:b02a AboCom Systems Inc AboCom Bluetooth Device
+  Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
+  Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: System Manufacter System Product Name
  MarkForUpload: True
  ProcEnviron:
-  LANGUAGE=en_GB:en
-  TERM=xterm
-  PATH=(custom, no user)
-  LANG=en_GB.UTF-8
-  SHELL=/bin/bash
+  LANGUAGE=en_GB:en
+  TERM=xterm
+  PATH=(custom, no user)
+  LANG=en_GB.UTF-8
+  SHELL=/bin/bash
  ProcFB:
-  
+ 
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=40b9b3ca-79bd-43f1-a717-cc700a47acad ro bootdegraded=true quiet splash
  PulseList:
-  Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied
-  No PulseAudio daemon running, or not running as session daemon.
+  Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied
+  No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
-  linux-restricted-modules-3.11.0-13-generic N/A
-  linux-backports-modules-3.11.0-13-generic  N/A
-  linux-firmware                             1.116
+  linux-restricted-modules-3.11.0-13-generic N/A
+  linux-backports-modules-3.11.0-13-generic  N/A
+  linux-firmware                             1.116
  RfKill:
-  0: hci0: Bluetooth
-  	Soft blocked: no
-  	Hard blocked: no
+  0: hci0: Bluetooth
+   Soft blocked: no
+   Hard blocked: no
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-11-07 (3 days ago)
  dmi.bios.date: 11/19/2007
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: KN9(NF-MCP55 series)
  dmi.board.vendor: http://www.abit.com.tw/
  dmi.board.version: 1.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: System Enclosure Manufacter
  dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd11/19/2007:svnSystemManufacter:pnSystemProductName:pvrSystemVersion:rvnhttp//www.abit.com.tw/:rnKN9(NF-MCP55series):rvr1.x:cvnSystemEnclosureManufacter:ct3:cvr:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System Manufacter

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1249979

Title:
  r8169 Ethernet driver doesn't work

Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  UPDATE: This is most likely fixed in 14.04, but it likely to remain
  non-functional in 13.10.

  Following an upgrade from 13.04 to 13.10, gigabit card stopped working
  (100Mbps ethernet working fine on the motherboard still - KN9 Ultra).

  dmesg gives a load of warnings "r8169 0000:01:0a.0 eth0:
  rtl_phyar_cond == 0 (loop: 20, delay: 25)." and when rmmodding r8169
  and modprobing it, I get:

  [  125.198865] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  [  125.199151] r8169 0000:01:0a.0 (unregistered net_device): not PCI Express
  [  125.199669] r8169 0000:01:0a.0 eth0: RTL8169sb/8110sb at 0xffffc90000c5a000, 00:21:27:c9:5f:cf, XID 10000000 IRQ 18
  [  125.199677] r8169 0000:01:0a.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
  [  125.231623] r8169 0000:01:0a.0 eth0: link down
  [  125.233790] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [  125.240366] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

  Plugging out and then in the cable makes no difference.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-13-generic 3.11.0-13.20
  ProcVersionSignature: Ubuntu 3.11.0-13.20-generic 3.11.6
  Uname: Linux 3.11.0-13-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.12.5-0ubuntu2.1
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  marc       2150 F.... pulseaudio
   /dev/snd/controlC1:  marc       2150 F.... pulseaudio
  Date: Mon Nov 11 08:19:31 2013
  InstallationDate: Installed on 2013-05-22 (172 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  IwConfig:
   eth0      no wireless extensions.

   eth1      no wireless extensions.

   lo        no wireless extensions.
  Lsusb:
   Bus 001 Device 002: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 003: ID 07b8:b02a AboCom Systems Inc AboCom Bluetooth Device
   Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: System Manufacter System Product Name
  MarkForUpload: True
  ProcEnviron:
   LANGUAGE=en_GB:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  ProcFB:

  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=40b9b3ca-79bd-43f1-a717-cc700a47acad ro bootdegraded=true quiet splash
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-13-generic N/A
   linux-backports-modules-3.11.0-13-generic  N/A
   linux-firmware                             1.116
  RfKill:
   0: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-11-07 (3 days ago)
  dmi.bios.date: 11/19/2007
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: KN9(NF-MCP55 series)
  dmi.board.vendor: http://www.abit.com.tw/
  dmi.board.version: 1.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: System Enclosure Manufacter
  dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd11/19/2007:svnSystemManufacter:pnSystemProductName:pvrSystemVersion:rvnhttp//www.abit.com.tw/:rnKN9(NF-MCP55series):rvr1.x:cvnSystemEnclosureManufacter:ct3:cvr:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System Manufacter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1249979/+subscriptions


References