kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #36420
[Bug 875677] Re: Kernel Power management turnming off used devices that are in use.
Haakon McKay, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/875677/comments/7
regarding this being fixed by uninstalling powernap. For future
reference you can manage the status of your own bugs by clicking on the
current status in the yellow line and then choosing a new status in the
revealed drop down box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.
** Description changed:
- My usb bus keeps sleeping and powering back up
- It does this to the point that I get messages about the new id being refused by the device.
- My usb mouse gets turned off after only a couple of minutes.
- Also my network devices are getting turned off - I have listening services that are then crashing due to the interface going down.
- I have to restart networking to "wake them up" and reinitialize them - then I have to restart all the services attached.
+ My usb bus keeps sleeping and powering back up. It does this to the
+ point that I get messages about the new id being refused by the device.
+ My usb mouse gets turned off after only a couple of minutes. Also my
+ network devices are getting turned off - I have listening services that
+ are then crashing due to the interface going down. I have to restart
+ networking to "wake them up" and reinitialize them - then I have to
+ restart all the services attached. Since the services in question are -
+ dhcpd and openvpn to allow me to remote access my desktop and allow my
+ family a secure environment - this is more than annoying. I would rather
+ not allow the usb bus and the network devices to sleep at all. I noticed
+ the USB sleep thing in UBUNTU 11.04 - but just thought it was normal,
+ but annoying. I discovered that It was affecting a usb DTV dongle. - It
+ would eventually not operate. But it has gotten worse in 11.10.
- Since the services in question are - dhcpd and openvpn to allow me to
- remote access my desktop and allow my family a secure environment - this
- is more than annoying.
-
- I would rather not allow the usb bus and the network devices to sleep at
- all.
-
- I noticed the USB sleep thing in UBUNTU 11.04 - but just thought it was normal - annoying but normal
- I discovered that It was affecting a usb DTV dongle. - It would eventually not operate.
-
- But it has gotten worse in 11.10 - exceedingly so.
+ WORKAROUND: uninstall powernap.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: linux-image 3.0.0.12.14
ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4
Uname: Linux 3.0.0-12-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 1.23-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC2: conon 4552 F.... pulseaudio
/dev/snd/controlC1: conon 4552 F.... pulseaudio
/dev/snd/controlC0: conon 4552 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Creative'/'HDA Creative at 0xd0c00000 irq 16'
Mixer name : 'Creative CA0110-IBG'
Components : 'HDA:1102000a,11021006,00100000'
Controls : 25
Simple ctrls : 11
Card1.Amixer.info:
Card hw:1 'Generic'/'HD-Audio Generic at 0xd1020000 irq 48'
Mixer name : 'ATI R6xx HDMI'
Components : 'HDA:1002aa01,00aa0100,00100200'
Controls : 4
Simple ctrls : 1
Card1.Amixer.values:
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Card2.Amixer.info:
Card hw:2 'U0x46d0x802'/'USB Device 0x46d:0x802 at usb-0000:00:1d.7-1.2.7, high speed'
Mixer name : 'USB Mixer'
Components : 'USB046d:0802'
Controls : 2
Simple ctrls : 1
Card2.Amixer.values:
Simple mixer control 'Mic',0
Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum
Capture channels: Mono
Limits: Capture 0 - 6144
Mono: Capture 5440 [89%] [27.25dB] [on]
Date: Sun Oct 16 19:57:44 2011
HibernationDevice: RESUME=UUID=988ba92d-2f57-4975-b43c-b5115f7a31fe
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
MachineType: Juniper Networks WXC 500
ProcEnviron:
LANGUAGE=
PATH=(custom, user)
LANG=en_AU.utf8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=0b742887-2729-480c-b0fa-33f0806d65f2 ro splash quiet vga=769 usbcore.autosuspend=-1 quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.0.0-12-generic N/A
linux-backports-modules-3.0.0-12-generic N/A
linux-firmware 1.60
RfKill:
SourcePackage: linux
UpgradeStatus: Upgraded to oneiric on 2011-10-15 (1 days ago)
dmi.bios.date: 05/11/2007
dmi.bios.vendor: Phoenix Technologies LTD
dmi.bios.version: 6.00
dmi.board.name: PDSML+
dmi.board.vendor: Supermicro
dmi.board.version: PCB Version
dmi.chassis.type: 1
dmi.chassis.vendor: Supermicro
dmi.chassis.version: 0123456789
dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd05/11/2007:svnJuniperNetworks:pnWXC500:pvr1.0:rvnSupermicro:rnPDSML+:rvrPCBVersion:cvnSupermicro:ct1:cvr0123456789:
dmi.product.name: WXC 500
dmi.product.version: 1.0
dmi.sys.vendor: Juniper Networks
** Changed in: linux (Ubuntu)
Status: Triaged => Invalid
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/875677
Title:
Kernel Power management turnming off used devices that are in use.
Status in “linux” package in Ubuntu:
Invalid
Bug description:
My usb bus keeps sleeping and powering back up. It does this to the
point that I get messages about the new id being refused by the
device. My usb mouse gets turned off after only a couple of minutes.
Also my network devices are getting turned off - I have listening
services that are then crashing due to the interface going down. I
have to restart networking to "wake them up" and reinitialize them -
then I have to restart all the services attached. Since the services
in question are - dhcpd and openvpn to allow me to remote access my
desktop and allow my family a secure environment - this is more than
annoying. I would rather not allow the usb bus and the network devices
to sleep at all. I noticed the USB sleep thing in UBUNTU 11.04 - but
just thought it was normal, but annoying. I discovered that It was
affecting a usb DTV dongle. - It would eventually not operate. But it
has gotten worse in 11.10.
WORKAROUND: uninstall powernap.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: linux-image 3.0.0.12.14
ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4
Uname: Linux 3.0.0-12-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 1.23-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC2: conon 4552 F.... pulseaudio
/dev/snd/controlC1: conon 4552 F.... pulseaudio
/dev/snd/controlC0: conon 4552 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Creative'/'HDA Creative at 0xd0c00000 irq 16'
Mixer name : 'Creative CA0110-IBG'
Components : 'HDA:1102000a,11021006,00100000'
Controls : 25
Simple ctrls : 11
Card1.Amixer.info:
Card hw:1 'Generic'/'HD-Audio Generic at 0xd1020000 irq 48'
Mixer name : 'ATI R6xx HDMI'
Components : 'HDA:1002aa01,00aa0100,00100200'
Controls : 4
Simple ctrls : 1
Card1.Amixer.values:
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Card2.Amixer.info:
Card hw:2 'U0x46d0x802'/'USB Device 0x46d:0x802 at usb-0000:00:1d.7-1.2.7, high speed'
Mixer name : 'USB Mixer'
Components : 'USB046d:0802'
Controls : 2
Simple ctrls : 1
Card2.Amixer.values:
Simple mixer control 'Mic',0
Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum
Capture channels: Mono
Limits: Capture 0 - 6144
Mono: Capture 5440 [89%] [27.25dB] [on]
Date: Sun Oct 16 19:57:44 2011
HibernationDevice: RESUME=UUID=988ba92d-2f57-4975-b43c-b5115f7a31fe
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
MachineType: Juniper Networks WXC 500
ProcEnviron:
LANGUAGE=
PATH=(custom, user)
LANG=en_AU.utf8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=0b742887-2729-480c-b0fa-33f0806d65f2 ro splash quiet vga=769 usbcore.autosuspend=-1 quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.0.0-12-generic N/A
linux-backports-modules-3.0.0-12-generic N/A
linux-firmware 1.60
RfKill:
SourcePackage: linux
UpgradeStatus: Upgraded to oneiric on 2011-10-15 (1 days ago)
dmi.bios.date: 05/11/2007
dmi.bios.vendor: Phoenix Technologies LTD
dmi.bios.version: 6.00
dmi.board.name: PDSML+
dmi.board.vendor: Supermicro
dmi.board.version: PCB Version
dmi.chassis.type: 1
dmi.chassis.vendor: Supermicro
dmi.chassis.version: 0123456789
dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd05/11/2007:svnJuniperNetworks:pnWXC500:pvr1.0:rvnSupermicro:rnPDSML+:rvrPCBVersion:cvnSupermicro:ct1:cvr0123456789:
dmi.product.name: WXC 500
dmi.product.version: 1.0
dmi.sys.vendor: Juniper Networks
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/875677/+subscriptions
