kernel-packages team mailing list archive

[Mark Brown <mark.brown@xxxxxxxxxxxxx>]

I am seeing this in 13.10, on a Lenovo L430.
- There is no CD in the drive. The drive is empty.
- The physical switch on the CD-ROM drive also does nothing.
- The door works fine after reboot. It only gets locked after ejecting 1 CD.
- This happens when ejecting using Nautilus, and when ejecting using Unity dock right-click-eject.

$ sudo eject -v
[sudo] password for xxx: 
eject: using default device `cdrom'
eject: device name is `cdrom'
eject: expanded name is `/dev/cdrom'
eject: `/dev/cdrom' is a link to `/dev/sr0'
eject: `/dev/sr0' is not mounted
eject: `/dev/sr0' is not a mount point
eject: `/dev/sr0' is not a multipartition device
eject: trying to eject `/dev/sr0' using CD-ROM eject command
eject: CD-ROM eject command failed
eject: trying to eject `/dev/sr0' using SCSI commands
eject: SCSI eject failed
eject: trying to eject `/dev/sr0' using floppy eject command
eject: floppy eject command failed
eject: trying to eject `/dev/sr0' using tape offline command
eject: tape offline command failed
eject: unable to eject, last error: Inappropriate ioctl for device

$ sudo hdparm -I /dev/sr0

/dev/sr0:

ATAPI CD-ROM, with removable media
	Model Number:       HL-DT-ST DVDRAM GT80N                   
	Serial Number:      M8LD9N22229         
	Firmware Revision:  LN81    
	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
	Likely used CD-ROM ATAPI-1
Configuration:
	DRQ response: 50us.
	Packet size: 12 bytes
	cache/buffer size  = unknown
Capabilities:
	LBA, IORDY(can be disabled)
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	Power Management feature set
	   *	PACKET command feature set
	   *	DEVICE_RESET command
	   *	NOP cmd
	   *	64-bit World wide name
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Phy event counters
	    	Device-initiated interface power management
	    	Asynchronous notification (eg. media change)
	   *	Software settings preservation

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to eject in Ubuntu.
https://bugs.launchpad.net/bugs/442282

Title:
  CDROM door does not open

Status in “eject” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: eject

  root@dell-desktop:~# eject -v /dev/sr0
  eject: device name is `/dev/sr0'
  eject: expanded name is `/dev/sr0'
  eject: `/dev/sr0' is not mounted
  eject: `/dev/sr0' is not a mount point
  eject: `/dev/sr0' is not a multipartition device
  eject: trying to eject `/dev/sr0' using CD-ROM eject command
  eject: CD-ROM eject command failed
  eject: trying to eject `/dev/sr0' using SCSI commands
  eject: SCSI eject succeeded

  However, nothing happens and the door remains shut.

  ProblemType: Bug
  Architecture: i386
  Date: Sun Oct  4 07:33:11 2009
  DistroRelease: Ubuntu 9.10
  Package: eject 2.1.5+deb1+cvs20081104-6
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 2.6.31-11.36-generic
  SourcePackage: eject
  Uname: Linux 2.6.31-11-generic i686

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/eject/+bug/442282/+subscriptions