kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #40437
[Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
Have exactly the same problem, very difficult to fix
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1265151
Title:
1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after
upgrading to 13.10
Status in “linux” package in Ubuntu:
Incomplete
Bug description:
After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290)
To me it looks like this problem:
http://www.spinics.net/lists/linux-wireless/msg113047.html
$ lsb_releasee -rd
Description: Ubuntu 13.10
Release: 13.10
$ apt-cache policy linux
linux:
Installeret: (ingen)
Kandidat: 3.11.0.14.15
Versionstabel:
3.11.0.14.15 0
500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages
500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages
3.11.0.12.13 0
500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages
I expected wifi to work as in 13.04, but it is unstable and in is
deactivated after some time.
I can reproduce the problem with
$ sudo rmmod rt2800pci
$ sudo modprobe rt2800pci
after that WIFI works for some seconds or minutes, then it is
disconnected.
the dmesg output is like this but it varies a bit...
[ 360.455741] rt2800pci 0000:04:00.0: irq 56 for MSI/MSI-X
[ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b
[ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3)
[ 362.617959] wlan0: authenticated
[ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3)
[ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2)
[ 362.624103] wlan0: associated
[ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 446.156373] r8169 0000:02:00.0 eth0: link down
[ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 476.807303] cfg80211: Calling CRDA to update world regulatory domain
[ 476.813452] cfg80211: World regulatory domain updated:
[ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 476.813475] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-14-generic 3.11.0-14.21
ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7
Uname: Linux 3.11.0-14-generic x86_64
NonfreeKernelModules: fglrx
ApportVersion: 2.12.5-0ubuntu2.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: jarl 1860 F.... pulseaudio
/dev/snd/controlC0: jarl 1860 F.... pulseaudio
Date: Tue Dec 31 09:11:38 2013
HibernationDevice: RESUME=UUID=92f3c741-1bd3-4762-a2c1-59d27eef756c
InstallationDate: Installed on 2013-12-28 (2 days ago)
InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1)
MachineType: Hewlett-Packard HP ProBook 455 G1
MarkForUpload: True
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic root=UUID=3f5bd5b6-65b8-4ea5-bf33-4a8a7bf79b52 ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.11.0-14-generic N/A
linux-backports-modules-3.11.0-14-generic N/A
linux-firmware 1.116
RfKill:
4: phy4: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/26/2013
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: 68CPE Ver. F.02
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 194E
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 91.0B
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnHewlett-Packard:bvr68CPEVer.F.02:bd04/26/2013:svnHewlett-Packard:pnHPProBook455G1:pvrA2019DD203:rvnHewlett-Packard:rn194E:rvrKBCVersion91.0B:cvnHewlett-Packard:ct10:cvr:
dmi.product.name: HP ProBook 455 G1
dmi.product.version: A2019DD203
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1265151/+subscriptions
References