kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #41729
[Bug 1269883] Re: 0b95:1790 [Asus N55SF] Bad performance of Ethernet on USB3 port, dmesg flooded with errors
gouri, thank you for providing the requested information. Could you
please test the latest mainline kernel (not 3.12-rc7) via
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.13-trusty/ and advise
if this is reproducible?
** Summary changed:
- Bad performance of Ethernet on USB3 port, dmesg flooded with errors
+ 0b95:1790 [Asus N55SF] Bad performance of Ethernet on USB3 port, dmesg flooded with errors
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1269883
Title:
0b95:1790 [Asus N55SF] Bad performance of Ethernet on USB3 port, dmesg
flooded with errors
Status in “linux” package in Ubuntu:
Incomplete
Bug description:
Plugging USB-to-ethernet device ID 0b95:1790 ASIX Electronics Corp. in
USB3 port yields slow performance, dmesg flooded with errors. Plugging
on USB2 port, exact same situation otherwise, works well. This is
reproducible 3 out of 4 attempts. Machine has 2 USB3 ports on the
left, 2 USB2 ports on the right.
### When working (USB2 port)
* ethernet auto-negociation is fast
* mii-tool is fast (typical 0.05s)
* few lines in dmesg
* good performance
### When failing :
* ethernet auto-negociation fails, then sometimes eventually works
* mii-tool is slow (10s of seconds instead of 0.05s)
time sudo mii-tool
eth0: no link
eth1: 10 Mbit, half duplex, no link
real 0m40.014s
user 0m0.013s
sys 0m0.006s
time sudo mii-tool
eth0: no link
eth1: 10 Mbit, half duplex, no link
real 0m50.015s
user 0m0.011s
sys 0m0.011s
time sudo mii-tool
eth0: no link
eth1: negotiated 100baseTx-FD, link ok
real 0m10.051s
user 0m0.000s
sys 0m0.012s
But on some attempts mii-tool is fast...
time sudo mii-tool
eth0: no link
eth1: negotiated 100baseTx-FD, link ok
real 0m0.057s
user 0m0.011s
sys 0m0.012s
* DHCP eventually completes (after about 30 seconds) then ethernet works.
* whole system behaviour feels a little sluggish (not very clear, though)
* mii-tool still slow (10s of seconds instead of 0.05s)
## dmesg when failing
Full dmesg attached.
Specific lines with occurrence count at random point (obtained with
"dmesg | sed 's/^................//' | sort | uniq -c | sort -n" ).
50 ei_me 0000:00:16.0: reset: wrong host start response
51 ei_me 0000:00:16.0: reset: unexpected enumeration response hbm.
60 ax88179_178a 4-1:1.0 eth1: kevent 4 may have been dropped
100 ei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
141 xhci_hcd 0000:04:00.0: ERROR Transfer event TRB DMA ptr not part of current TD
214 ax88179_178a 4-1:1.0 eth1: ax88179 - Link status is: 1
Another attempt
11 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x0000: -110
14 ax88179_178a 4-1:1.0 eth1: Failed to write reg index 0x0002: -110
61 xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
61 xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
209 ax88179_178a 4-1:1.0 eth1: kevent 4 may have been dropped
809 ax88179_178a 4-1:1.0 eth1: ax88179 - Link status is: 1
925 xhci_hcd 0000:04:00.0: ERROR Transfer event TRB DMA ptr not part of current TD
5 IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
6 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x0001: -110
6 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x0009: -110
6 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x000a: -110
6 net_ratelimit: 31 callbacks suppressed
9 IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
10 net_ratelimit: 30 callbacks suppressed
14 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x0000: -110
14 ax88179_178a 4-1:1.0 eth1: Failed to write reg index 0x0002: -110
209 ax88179_178a 4-1:1.0 eth1: kevent 4 may have been dropped
232 xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
232 xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
610 xhci_hcd 0000:04:00.0: ERROR Transfer event TRB DMA ptr not part of current TD
809 ax88179_178a 4-1:1.0 eth1: ax88179 - Link status is: 1
Jan 16 18:39:35 n55sf-l kernel: [203181.206451] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:36 n55sf-l kernel: [203181.578841] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:36 n55sf-l kernel: [203181.578854] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:36 n55sf-l kernel: [203182.075350] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:36 n55sf-l kernel: [203182.075364] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:36 n55sf-l kernel: [203182.199491] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:36 n55sf-l kernel: [203182.199504] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:37 n55sf-l kernel: [203182.944174] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:37 n55sf-l kernel: [203182.944178] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:37 n55sf-l kernel: [203183.068300] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:37 n55sf-l kernel: [203183.068305] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:37 n55sf-l kernel: [203183.192433] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
## On USB2 port everything fine.
Jan 16 18:26:44 n55sf-l kernel: [202408.897761] usb 2-1.4: new high-speed USB device number 18 using ehci-pci
Jan 16 18:26:44 n55sf-l kernel: [202408.996745] usb 2-1.4: New USB device found, idVendor=0b95, idProduct=1790
Jan 16 18:26:44 n55sf-l kernel: [202408.996757] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 18:26:44 n55sf-l kernel: [202408.996763] usb 2-1.4: Product: AX88179
Jan 16 18:26:44 n55sf-l kernel: [202408.996769] usb 2-1.4: Manufacturer: ASIX Elec. Corp.
Jan 16 18:26:44 n55sf-l kernel: [202408.996774] usb 2-1.4: SerialNumber: 00000000000116
Jan 16 18:26:44 n55sf-l kernel: [202409.325222] ax88179_178a 2-1.4:1.0 eth1: register 'ax88179_178a' at usb-0000:00:1d.0-1.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:05:1b:a3:37:f6
Jan 16 18:26:45 n55sf-l kernel: [202409.681691] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 16 18:26:45 n55sf-l kernel: [202409.685338] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 16 18:26:47 n55sf-l kernel: [202411.782132] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 1
Jan 16 18:26:47 n55sf-l kernel: [202411.785044] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
## Once things went fine on a USB3 port
Jan 16 18:27:45 n55sf-l kernel: [202470.636671] usb 3-2: new high-speed USB device number 12 using xhci_hcd
Jan 16 18:27:46 n55sf-l kernel: [202470.689067] usb 3-2: New USB device found, idVendor=0b95, idProduct=1790
Jan 16 18:27:46 n55sf-l kernel: [202470.689079] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 18:27:46 n55sf-l kernel: [202470.689085] usb 3-2: Product: AX88179
Jan 16 18:27:46 n55sf-l kernel: [202470.689090] usb 3-2: Manufacturer: ASIX Elec. Corp.
Jan 16 18:27:46 n55sf-l kernel: [202470.689095] usb 3-2: SerialNumber: 00000000000116
Jan 16 18:27:46 n55sf-l kernel: [202471.012136] ax88179_178a 3-2:1.0 eth1: register 'ax88179_178a' at usb-0000:04:00.0-2, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:05:1b:a3:37:f6
Jan 16 18:27:46 n55sf-l kernel: [202471.367771] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 16 18:27:46 n55sf-l kernel: [202471.371383] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 16 18:27:48 n55sf-l kernel: [202473.414584] ax88179_178a 3-2:1.0 eth1: ax88179 - Link status is: 1
Jan 16 18:27:48 n55sf-l kernel: [202473.416586] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
## Then bad again on next attempt on USB3 port with different infinite loop of error messages:
11 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x0000: -110
14 ax88179_178a 4-1:1.0 eth1: Failed to write reg index 0x0002: -110
61 xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
61 xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
209 ax88179_178a 4-1:1.0 eth1: kevent 4 may have been dropped
809 ax88179_178a 4-1:1.0 eth1: ax88179 - Link status is: 1
925 xhci_hcd 0000:04:00.0: ERROR Transfer event TRB DMA ptr not part of current TD
5 IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
6 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x0001: -110
6 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x0009: -110
6 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x000a: -110
6 net_ratelimit: 31 callbacks suppressed
9 IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
10 net_ratelimit: 30 callbacks suppressed
14 ax88179_178a 4-1:1.0 eth1: Failed to read reg index 0x0000: -110
14 ax88179_178a 4-1:1.0 eth1: Failed to write reg index 0x0002: -110
209 ax88179_178a 4-1:1.0 eth1: kevent 4 may have been dropped
232 xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
232 xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
610 xhci_hcd 0000:04:00.0: ERROR Transfer event TRB DMA ptr not part of current TD
809 ax88179_178a 4-1:1.0 eth1: ax88179 - Link status is: 1
Jan 16 18:39:35 n55sf-l kernel: [203181.206451] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:36 n55sf-l kernel: [203181.578841] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:36 n55sf-l kernel: [203181.578854] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:36 n55sf-l kernel: [203182.075350] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:36 n55sf-l kernel: [203182.075364] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:36 n55sf-l kernel: [203182.199491] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:36 n55sf-l kernel: [203182.199504] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:37 n55sf-l kernel: [203182.944174] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:37 n55sf-l kernel: [203182.944178] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:37 n55sf-l kernel: [203183.068300] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
Jan 16 18:39:37 n55sf-l kernel: [203183.068305] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending.
Jan 16 18:39:37 n55sf-l kernel: [203183.192433] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr
## Additional attempts on USB2 port went fine.
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.4.10
Re: ERROR transfer event TRB DMA ptr not part of current TD -- Linux USB http://www.spinics.net/lists/linux-usb/msg85388.html
ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-15-generic 3.11.0-15.23
ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10
Uname: Linux 3.11.0-15-generic x86_64
ApportVersion: 2.12.5-0ubuntu2.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: stephane 1815 F.... pulseaudio
Date: Thu Jan 16 18:34:32 2014
HibernationDevice: RESUME=UUID=d05e8def-662d-4d3a-b3b3-4d9d2997966d
MachineType: ASUSTeK Computer Inc. N55SF
MarkForUpload: True
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=12f862a8-f6b9-4c9e-8bf7-030b86b75241 ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.11.0-15-generic N/A
linux-backports-modules-3.11.0-15-generic N/A
linux-firmware 1.116
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 08/29/2011
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: N55SF.207
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: N55SF
dmi.board.vendor: ASUSTeK Computer Inc.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK Computer Inc.
dmi.chassis.version: 1.0
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN55SF.207:bd08/29/2011:svnASUSTeKComputerInc.:pnN55SF:pvr1.0:rvnASUSTeKComputerInc.:rnN55SF:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0:
dmi.product.name: N55SF
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK Computer Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1269883/+subscriptions
References
