← Back to team overview

kernel-packages team mailing list archive

[Bug 991040] Re: COMRESET failed (errno=-16) on Intel SSD

 

I've started experiencing this after an upgrade from 13.10 to trusty.
This significantly slows down both the initial boot and resuming from
suspend (which now takes a couple of minutes, as opposed to a few
seconds in 13.10).

Same as with commenter on comment #16, when I first noticed this I did a
firmare upgrade of my SSD (Intel SSD X25-M 80GB, from firmware 2CV102HD
to 2CV102M3). That did not solve the issue.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/991040

Title:
  COMRESET failed (errno=-16) on Intel SSD

Status in The Linux Kernel:
  Confirmed
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  On my fresh Ubuntu 12.04 on a Dell Precision (Ubuntu certified right?) with a premium
  Inted Server SSD I am forced to make the following experience.

  During boot I have to wait for 20 seconds due to the following
  scenario:

  Excerpt of dmesg | grep ata:
  [    7.718628] ata1: link is slow to respond, please be patient (ready=0)
  [   12.365148] ata1: COMRESET failed (errno=-16)
  [   17.723437] ata1: link is slow to respond, please be patient (ready=0)
  [   22.369960] ata1: COMRESET failed (errno=-16)
  [   27.728248] ata1: link is slow to respond, please be patient (ready=0)
  [   57.398789] ata1: COMRESET failed (errno=-16)
  [   57.398800] ata1: limiting SATA link speed to 1.5 Gbps
  [   57.718702] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

  After that the Intel SSD is connected in limited SATA1 mode to the
  system. :-(

  The same SSD works on the same machine just fine under windows 7, 
  thus I think one can exclude hardware issues here.

  SSD Info:
  hdparm -I /dev/sdc:

  /dev/sdc:

  ATA device, with non-removable media
  	Model Number:       SSDSA2SH064G1GC INTEL                   
  	Serial Number:      CVEM005500N4064KGN  
  	Firmware Revision:  045C8860
  	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
  Standards:
  	Used: ATA/ATAPI-7 T13 1532D revision 1 
  	Supported: 7 6 5 4 
  Configuration:
  	Logical		max	current
  	cylinders	16383	16383
  	heads		16	16
  	sectors/track	63	63
  	--
  	CHS current addressable sectors:   16514064
  	LBA    user addressable sectors:  125045424
  	LBA48  user addressable sectors:  125045424
  	Logical  Sector size:                   512 bytes
  	Physical Sector size:                   512 bytes
  	device size with M = 1024*1024:       61057 MBytes
  	device size with M = 1000*1000:       64023 MBytes (64 GB)
  	cache/buffer size  = unknown
  	Nominal Media Rotation Rate: Solid State Device
  Capabilities:
  	LBA, IORDY(can be disabled)
  	Queue depth: 31
  	Standby timer values: spec'd by Standard, no device specific minimum
  	R/W multiple sector transfer: Max = 16	Current = 16
  	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
  	     Cycle time: min=120ns recommended=120ns
  	PIO: pio0 pio1 pio2 pio3 pio4 
  	     Cycle time: no flow control=120ns  IORDY flow control=120ns
  Commands/features:
  	Enabled	Supported:
  	   *	SMART feature set
  	    	Security Mode feature set
  	   *	Power Management feature set
  	   *	Write cache
  	   *	Look-ahead
  	   *	Host Protected Area feature set
  	   *	WRITE_BUFFER command
  	   *	READ_BUFFER command
  	   *	NOP cmd
  	   *	DOWNLOAD_MICROCODE
  	   *	48-bit Address feature set
  	   *	Device Configuration Overlay feature set
  	   *	Mandatory FLUSH_CACHE
  	   *	FLUSH_CACHE_EXT
  	   *	SMART error logging
  	   *	SMART self-test
  	   *	General Purpose Logging feature set
  	   *	64-bit World wide name
  	   *	IDLE_IMMEDIATE with UNLOAD
  	   *	WRITE_UNCORRECTABLE_EXT command
  	   *	{READ,WRITE}_DMA_EXT_GPL commands
  	   *	Segmented DOWNLOAD_MICROCODE
  	   *	Gen1 signaling speed (1.5Gb/s)
  	   *	Gen2 signaling speed (3.0Gb/s)
  	   *	Native Command Queueing (NCQ)
  	    	Device-initiated interface power management
  	   *	Software settings preservation
  Security: 
  	Master password revision code = 65534
  		supported
  	not	enabled
  	not	locked
  		frozen
  	not	expired: security count
  		supported: enhanced erase
  	2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
  Logical Unit WWN Device Identifier: 50015179591c56b6
  	NAA		: 5
  	IEEE OUI	: 001517
  	Unique ID	: 9591c56b6
  Checksum: correct

  I assume that any further information is attached by the 'ubuntu-bug
  linux' command to that issue.

  
  Please help, as I would like to decrease my boot time from now 1 Minute a bit further AND most important of course I want to use a SATA mode that is capable of deliver data as fast as the super expensive drive can do it also under Ubuntu!

  Thank you for your work!
  cue

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.2.0-24-generic 3.2.0-24.37
  ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14
  Uname: Linux 3.2.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu7
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC2:  yeshe      2374 F.... pulseaudio
   /dev/snd/controlC1:  yeshe      2374 F.... pulseaudio
   /dev/snd/controlC0:  yeshe      2374 F.... pulseaudio
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xe1e60000 irq 54'
     Mixer name	: 'IDT 92HD90BXX'
     Components	: 'HDA:111d76e7,102804a4,00100102'
     Controls      : 20
     Simple ctrls  : 11
  Card1.Amixer.info:
   Card hw:1 'NVidia'/'HDA NVidia at 0xe0080000 irq 17'
     Mixer name	: 'Nvidia GPU 12 HDMI/DP'
     Components	: 'HDA:10de0012,10de0101,00100100'
     Controls      : 24
     Simple ctrls  : 4
  Card2.Amixer.info:
   Card hw:2 'Camera'/'Camera at usb-0000:00:1a.0-1.2.2.4.1.3, full speed'
     Mixer name	: 'USB Mixer'
     Components	: 'USB046d:08a9'
     Controls      : 3
     Simple ctrls  : 2
  Date: Sun Apr 29 13:12:09 2012
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Alpha amd64 (20120319)
  MachineType: Dell Inc. Precision M6600
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=44ca2bff-8e4d-44af-843f-0a86a3f4e3d9 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-24-generic N/A
   linux-backports-modules-3.2.0-24-generic  N/A
   linux-firmware                            1.79
  SourcePackage: linux
  StagingDrivers: mei
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
   
  dmi.bios.date: 10/18/2011
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A07
  dmi.board.name: 04YY4M
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: dmi:bvnDellInc.:bvrA07:bd10/18/2011:svnDellInc.:pnPrecisionM6600:pvr01:rvnDellInc.:rn04YY4M:rvrA00:cvnDellInc.:ct9:cvr:
  dmi.product.name: Precision M6600
  dmi.product.version: 01
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/991040/+subscriptions