← Back to team overview

kernel-packages team mailing list archive

[Bug 991040] Re: COMRESET failed (errno=-16) on Intel SSD

 

David - As Christopher has suggested, start a new bug using 'ubuntu-bug
linux', get Joe Salisbury's attention, boot your 3.11 kernel (assuming
it is still in the GRUB menu), log those results, etc. I'm sure Intel
will be interested to note that one of their flagship products is having
problems (assuming you are not having HW failure).

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/991040

Title:
  COMRESET failed (errno=-16) on Intel SSD

Status in The Linux Kernel:
  Confirmed
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  On my fresh Ubuntu 12.04 on a Dell Precision (Ubuntu certified right?) with a premium
  Inted Server SSD I am forced to make the following experience.

  During boot I have to wait for 20 seconds due to the following
  scenario:

  Excerpt of dmesg | grep ata:
  [    7.718628] ata1: link is slow to respond, please be patient (ready=0)
  [   12.365148] ata1: COMRESET failed (errno=-16)
  [   17.723437] ata1: link is slow to respond, please be patient (ready=0)
  [   22.369960] ata1: COMRESET failed (errno=-16)
  [   27.728248] ata1: link is slow to respond, please be patient (ready=0)
  [   57.398789] ata1: COMRESET failed (errno=-16)
  [   57.398800] ata1: limiting SATA link speed to 1.5 Gbps
  [   57.718702] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

  After that the Intel SSD is connected in limited SATA1 mode to the
  system. :-(

  The same SSD works on the same machine just fine under windows 7, 
  thus I think one can exclude hardware issues here.

  SSD Info:
  hdparm -I /dev/sdc:

  /dev/sdc:

  ATA device, with non-removable media
  	Model Number:       SSDSA2SH064G1GC INTEL                   
  	Serial Number:      CVEM005500N4064KGN  
  	Firmware Revision:  045C8860
  	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
  Standards:
  	Used: ATA/ATAPI-7 T13 1532D revision 1 
  	Supported: 7 6 5 4 
  Configuration:
  	Logical		max	current
  	cylinders	16383	16383
  	heads		16	16
  	sectors/track	63	63
  	--
  	CHS current addressable sectors:   16514064
  	LBA    user addressable sectors:  125045424
  	LBA48  user addressable sectors:  125045424
  	Logical  Sector size:                   512 bytes
  	Physical Sector size:                   512 bytes
  	device size with M = 1024*1024:       61057 MBytes
  	device size with M = 1000*1000:       64023 MBytes (64 GB)
  	cache/buffer size  = unknown
  	Nominal Media Rotation Rate: Solid State Device
  Capabilities:
  	LBA, IORDY(can be disabled)
  	Queue depth: 31
  	Standby timer values: spec'd by Standard, no device specific minimum
  	R/W multiple sector transfer: Max = 16	Current = 16
  	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
  	     Cycle time: min=120ns recommended=120ns
  	PIO: pio0 pio1 pio2 pio3 pio4 
  	     Cycle time: no flow control=120ns  IORDY flow control=120ns
  Commands/features:
  	Enabled	Supported:
  	   *	SMART feature set
  	    	Security Mode feature set
  	   *	Power Management feature set
  	   *	Write cache
  	   *	Look-ahead
  	   *	Host Protected Area feature set
  	   *	WRITE_BUFFER command
  	   *	READ_BUFFER command
  	   *	NOP cmd
  	   *	DOWNLOAD_MICROCODE
  	   *	48-bit Address feature set
  	   *	Device Configuration Overlay feature set
  	   *	Mandatory FLUSH_CACHE
  	   *	FLUSH_CACHE_EXT
  	   *	SMART error logging
  	   *	SMART self-test
  	   *	General Purpose Logging feature set
  	   *	64-bit World wide name
  	   *	IDLE_IMMEDIATE with UNLOAD
  	   *	WRITE_UNCORRECTABLE_EXT command
  	   *	{READ,WRITE}_DMA_EXT_GPL commands
  	   *	Segmented DOWNLOAD_MICROCODE
  	   *	Gen1 signaling speed (1.5Gb/s)
  	   *	Gen2 signaling speed (3.0Gb/s)
  	   *	Native Command Queueing (NCQ)
  	    	Device-initiated interface power management
  	   *	Software settings preservation
  Security: 
  	Master password revision code = 65534
  		supported
  	not	enabled
  	not	locked
  		frozen
  	not	expired: security count
  		supported: enhanced erase
  	2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
  Logical Unit WWN Device Identifier: 50015179591c56b6
  	NAA		: 5
  	IEEE OUI	: 001517
  	Unique ID	: 9591c56b6
  Checksum: correct

  I assume that any further information is attached by the 'ubuntu-bug
  linux' command to that issue.

  
  Please help, as I would like to decrease my boot time from now 1 Minute a bit further AND most important of course I want to use a SATA mode that is capable of deliver data as fast as the super expensive drive can do it also under Ubuntu!

  Thank you for your work!
  cue

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.2.0-24-generic 3.2.0-24.37
  ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14
  Uname: Linux 3.2.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu7
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC2:  yeshe      2374 F.... pulseaudio
   /dev/snd/controlC1:  yeshe      2374 F.... pulseaudio
   /dev/snd/controlC0:  yeshe      2374 F.... pulseaudio
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xe1e60000 irq 54'
     Mixer name	: 'IDT 92HD90BXX'
     Components	: 'HDA:111d76e7,102804a4,00100102'
     Controls      : 20
     Simple ctrls  : 11
  Card1.Amixer.info:
   Card hw:1 'NVidia'/'HDA NVidia at 0xe0080000 irq 17'
     Mixer name	: 'Nvidia GPU 12 HDMI/DP'
     Components	: 'HDA:10de0012,10de0101,00100100'
     Controls      : 24
     Simple ctrls  : 4
  Card2.Amixer.info:
   Card hw:2 'Camera'/'Camera at usb-0000:00:1a.0-1.2.2.4.1.3, full speed'
     Mixer name	: 'USB Mixer'
     Components	: 'USB046d:08a9'
     Controls      : 3
     Simple ctrls  : 2
  Date: Sun Apr 29 13:12:09 2012
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Alpha amd64 (20120319)
  MachineType: Dell Inc. Precision M6600
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=44ca2bff-8e4d-44af-843f-0a86a3f4e3d9 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-24-generic N/A
   linux-backports-modules-3.2.0-24-generic  N/A
   linux-firmware                            1.79
  SourcePackage: linux
  StagingDrivers: mei
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
   
  dmi.bios.date: 10/18/2011
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A07
  dmi.board.name: 04YY4M
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: dmi:bvnDellInc.:bvrA07:bd10/18/2011:svnDellInc.:pnPrecisionM6600:pvr01:rvnDellInc.:rn04YY4M:rvrA00:cvnDellInc.:ct9:cvr:
  dmi.product.name: Precision M6600
  dmi.product.version: 01
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/991040/+subscriptions