← Back to team overview

kernel-packages team mailing list archive

[Bug 1283650] Re: BUG: soft lockup - CPU#1 stuck for 22s! [wpa_supplicant:853]

 

*** This bug is a duplicate of bug 1283643 ***
    https://bugs.launchpad.net/bugs/1283643

** This bug has been marked a duplicate of bug 1283643
   BUG: soft lockup - CPU#1 stuck for 22s! [wpa_supplicant:853]

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1283650

Title:
  BUG: soft lockup - CPU#1 stuck for 22s! [wpa_supplicant:853]

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  at Sartup 
  Description:	Ubuntu Trusty Tahr (development branch)
  Release:	14.04
  after apt-get dist-upgrade
  Linux lutzw-N130 3.13.0-11-generic #31-Ubuntu SMP Wed Feb 19 19:59:55 UTC 2014 i686 i686 i686 GNU/Linux
  memory: 2.0 GiB
  processor: Intel® Atom™ CPU N270 @ 1.60GHz × 2
  graphics:  Intel® 945GME x86/MMX/SSE2
  running MIR
  lspci-vnvn:
  00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] (rev 03)
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
  	Latency: 0
  	Capabilities: [e0] Vendor Specific Information: Len=09 <?>
  	Kernel driver in use: agpgart-intel

  00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 16
  	Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=512K]
  	Region 1: I/O ports at 1800 [size=8]
  	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
  	Region 3: Memory at f0200000 (32-bit, non-prefetchable) [size=256K]
  	Expansion ROM at <unassigned> [disabled]
  	Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
  		Address: 00000000  Data: 0000
  	Capabilities: [d0] Power Management version 2
  		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: i915

  00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
  	Capabilities: [d0] Power Management version 2
  		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 44
  	Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee0300c  Data: 4122
  	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  	Capabilities: [100 v1] Virtual Channel
  		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
  		Arb:	Fixed- WRR32- WRR64- WRR128-
  		Ctrl:	ArbSelect=Fixed
  		Status:	InProgress-
  		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
  			Status:	NegoPending- InProgress-
  		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=80
  			Status:	NegoPending- InProgress-
  	Capabilities: [130 v1] Root Complex Link
  		Desc:	PortNumber=0f ComponentID=02 EltType=Config
  		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
  			Addr:	00000000fed1c000
  	Kernel driver in use: snd_hda_intel

  00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
  	I/O behind bridge: 00003000-00003fff
  	Memory behind bridge: f0100000-f01fffff
  	Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
  			ClockPM- Surprise- LLActRep+ BwNot-
  		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
  			Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  			Changed: MRL- PresDet- LinkState-
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  		Address: fee0300c  Data: 4191
  	Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [100 v1] Virtual Channel
  		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
  		Arb:	Fixed+ WRR32- WRR64- WRR128-
  		Ctrl:	ArbSelect=Fixed
  		Status:	InProgress-
  		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
  			Status:	NegoPending- InProgress-
  		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
  			Status:	NegoPending- InProgress-
  	Capabilities: [180 v1] Root Complex Link
  		Desc:	PortNumber=01 ComponentID=02 EltType=Config
  		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
  			Addr:	00000000fed1c001
  	Kernel driver in use: pcieport

  00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
  	I/O behind bridge: 00002000-00002fff
  	Memory behind bridge: 80200000-806fffff
  	Prefetchable memory behind bridge: 00000000f0500000-00000000f05fffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
  			ClockPM- Surprise- LLActRep+ BwNot-
  		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
  			Slot #4, PowerLimit 6.500W; Interlock- NoCompl-
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  			Changed: MRL- PresDet- LinkState-
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  		Address: fee0300c  Data: 41b1
  	Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [100 v1] Virtual Channel
  		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
  		Arb:	Fixed+ WRR32- WRR64- WRR128-
  		Ctrl:	ArbSelect=Fixed
  		Status:	InProgress-
  		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
  			Status:	NegoPending- InProgress-
  		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
  			Status:	NegoPending- InProgress-
  	Capabilities: [180 v1] Root Complex Link
  		Desc:	PortNumber=03 ComponentID=02 EltType=Config
  		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
  			Addr:	00000000fed1c001
  	Kernel driver in use: pcieport

  00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 23
  	Region 4: I/O ports at 1820 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 19
  	Region 4: I/O ports at 1840 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin C routed to IRQ 20
  	Region 4: I/O ports at 1860 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin D routed to IRQ 16
  	Region 4: I/O ports at 1880 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 23
  	Region 0: Memory at f0444000 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [58] Debug port: BAR=1 offset=00a0
  	Kernel driver in use: ehci-pci

  00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
  	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [50] Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]

  00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
  	Kernel driver in use: lpc_ich

  00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
  	Latency: 0
  	Interrupt: pin B routed to IRQ 19
  	Region 0: I/O ports at 01f0 [size=8]
  	Region 1: I/O ports at 03f4
  	Region 2: I/O ports at 0170 [size=8]
  	Region 3: I/O ports at 0374
  	Region 4: I/O ports at 1810 [size=16]
  	Capabilities: [70] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: ata_piix

  00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c05d]
  	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Interrupt: pin B routed to IRQ 5
  	Region 4: I/O ports at 18a0 [size=32]

  02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24)
  	Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 43
  	Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=8K]
  	Capabilities: [c8] Power Management version 3
  		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee0200c  Data: 41d1
  	Capabilities: [e0] Express (v1) Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
  			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <32us
  			ClockPM+ Surprise- LLActRep- BwNot-
  		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  	Capabilities: [100 v1] Advanced Error Reporting
  		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
  		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  		CESta:	RxErr- BadTLP+ BadDLLP- Rollover- Timeout- NonFatalErr+
  		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  		AERCap:	First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
  	Capabilities: [140 v1] Device Serial Number c4-d9-87-ff-ff-46-20-3f
  	Kernel driver in use: iwlwifi

  03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
  	Subsystem: Samsung Electronics Co Ltd Device [144d:c04d]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 42
  	Region 0: I/O ports at 2000 [size=256]
  	Region 2: Memory at f0510000 (64-bit, prefetchable) [size=4K]
  	Region 4: Memory at f0500000 (64-bit, prefetchable) [size=64K]
  	[virtual] Expansion ROM at f0520000 [disabled] [size=128K]
  	Capabilities: [40] Power Management version 3
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee0300c  Data: 41c1
  	Capabilities: [70] Express (v2) Endpoint, MSI 01
  		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
  			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 4096 bytes
  		DevSta:	CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
  			ClockPM+ Surprise- LLActRep- BwNot-
  		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
  		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
  		Vector table: BAR=4 offset=00000000
  		PBA: BAR=4 offset=00000800
  	Capabilities: [cc] Vital Product Data
  		Unknown small resource type 00, will not decode more.
  	Capabilities: [100 v1] Advanced Error Reporting
  		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
  		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  		AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
  	Capabilities: [140 v1] Virtual Channel
  		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
  		Arb:	Fixed- WRR32- WRR64- WRR128-
  		Ctrl:	ArbSelect=Fixed
  		Status:	InProgress-
  		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
  			Status:	NegoPending- InProgress-
  	Capabilities: [160 v1] Device Serial Number 01-00-00-00-00-00-00-00
  	Kernel driver in use: r8169

  version.log:
  Ubuntu 3.13.0-11.31-generic 3.13.3

  point 4 and 5 I cant answer because running normal but slow sometimes.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-11-generic 3.13.0-11.31
  ProcVersionSignature: Ubuntu 3.13.0-11.31-generic 3.13.3
  Uname: Linux 3.13.0-11-generic i686
  Annotation: Your system might become unstable now and might need to be restarted.
  ApportVersion: 2.13.2-0ubuntu5
  Architecture: i386
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  lutz_w     1559 F.... pulseaudio
  Date: Sun Feb 23 06:12:00 2014
  DuplicateSignature: BUG: soft lockup - CPU#1 stuck for 22s! [wpa_supplicant:853] EIP: 0060:location EFLAGS: 00200246 CPU: 1
  Failure: oops
  HibernationDevice: RESUME=UUID=50d181f7-5fec-43ce-9b8d-770612373e30
  InstallationDate: Installed on 2014-01-20 (33 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20140114)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. N130
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-11-generic root=UUID=334ed295-f319-4297-8785-3f3a13318a9b ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu4
  SourcePackage: linux
  Title: BUG: soft lockup - CPU#1 stuck for 22s! [wpa_supplicant:853]
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/08/2010
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: 06CM.M021.20100108.JIP
  dmi.board.name: N130
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: N/A
  dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr06CM.M021.20100108.JIP:bd01/08/2010:svnSAMSUNGELECTRONICSCO.,LTD.:pnN130:pvrNotApplicable:rvnSAMSUNGELECTRONICSCO.,LTD.:rnN130:rvrNotApplicable:cvnSAMSUNGELECTRONICSCO.,LTD.:ct10:cvrN/A:
  dmi.product.name: N130
  dmi.product.version: Not Applicable
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1283650/+subscriptions


References