← Back to team overview

kernel-packages team mailing list archive

[Bug 1279699] Re: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4

 

Still present in kernel 3.14.0-031400rc4-generic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1279699

Title:
  AER: Corrected error received: id=00e4 / PCIe Bus Error:
  severity=Corrected, type=Physical Layer, id=00e4

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Description:	  Ubuntu 13.10
  Release:	  13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10)

  On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following
  error:

  [   11.749109] bonding: bond0: Setting MII monitoring interval to 100.
  [   11.797258] bonding: bond1 is being created...
  [   11.797320] bonding: bond1 is being created...
  [   11.797322] bonding: bond1 is being created...
  [   11.797653] bonding: bond1 already exists.
  [   11.797658] bonding: bond1 already exists.
  [   11.808146] bonding: bond1: Setting MII monitoring interval to 100.
  [   11.824060] bonding: bond0: setting mode to 802.3ad (4).
  [   11.824063] bonding: bond1: setting mode to 802.3ad (4).
  [   11.825177] bonding: bond1: Setting LACP rate to fast (1).
  [   11.825259] bonding: bond0: Setting LACP rate to fast (1).
  [   11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready
  [   11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
  [   11.871240] bonding: bond0: Adding slave p2p1.
  [   12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  [   12.211592] init: avahi-cups-reload main process (823) terminated with status 1
  [   12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link.
  [   12.715620] bonding: bond1: Adding slave p4p3.
  [   13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link.
  [   13.072970] bonding: bond1: Adding slave p4p2.
  [   13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link.
  [   13.608934] bonding: bond0: Adding slave p3p1.
  [   13.976911] netxen_nic: p4p2 NIC Link is up
  [   14.008903] netxen_nic: p4p3 NIC Link is up
  [   14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link.
  [   14.450459] bonding: bond1: Adding slave p4p1.
  [   14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link.
  [   14.544866] bonding: bond1: Adding slave p4p4.
  [   14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond
  [   14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
  [   14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link.
  [   14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready
  [   14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1.
  [   14.862650] igb 0000:05:00.0: changing MTU from 1500 to 9000
  [   14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond
  [   14.938826] igb 0000:06:00.0: changing MTU from 1500 to 9000
  [   15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond
  [   15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex.
  [   15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex.
  [   15.940783] netxen_nic: p4p1 NIC Link is up
  [   15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex.
  [   17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
  [   17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond
  [   17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
  [   17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex.
  [   18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
  [   18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex.

  [   41.932293] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
  [   41.932337] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
  [   41.937340] pcieport 0000:00:1c.4:   device [8086:8c18] error status/mask=00000001/00002000
  [   41.942261] pcieport 0000:00:1c.4:    [ 0] Receiver Error         (First)

  [  538.342279] pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
  [  538.342306] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
  [  538.342763] pcieport 0000:00:1c.4:   device [8086:8c18] error status/mask=00000001/00002000
  [  538.343127] pcieport 0000:00:1c.4:    [ 0] Receiver Error         (First)

  These are new Supermicro X10SL7-F motherboards with new HP NC375T in the PCIE x8 (in x4) port.
  --- 
  AlsaDevices:
   total 0
   crw-rw---- 1 root audio 116,  1 Feb 13 12:00 seq
   crw-rw---- 1 root audio 116, 33 Feb 13 12:00 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.12.5-0ubuntu2.2
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDmesg:
   
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=83e4fd84-9f18-4328-ac8e-60c5e2451275
  MachineType: Supermicro X10SL7-F
  MarkForUpload: True
  Package: linux (not installed)
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=<set>
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 astdrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=4e3cc489-e68d-4a0f-965e-1211a3215e16 ro
  ProcVersionSignature: Ubuntu 3.11.0-15.25-generic 3.11.10
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-15-generic N/A
   linux-backports-modules-3.11.0-15-generic  N/A
   linux-firmware                             1.116.2
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  saucy
  Uname: Linux 3.11.0-15-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 07/19/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1.1
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: X10SL7-F
  dmi.board.vendor: Supermicro
  dmi.board.version:
   L�
�.
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 17
  dmi.chassis.vendor: Supermicro
  dmi.chassis.version: 0123456789
  dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.1:bd07/19/2013:svnSupermicro:pnX10SL7-F:pvr0123456789:rvnSupermicro:rnX10SL7-F:rvrL.:cvnSupermicro:ct17:cvr0123456789:
  dmi.product.name: X10SL7-F
  dmi.product.version: 0123456789
  dmi.sys.vendor: Supermicro

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279699/+subscriptions


References