kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #47927
[Bug 1164557] Re: 1002:7145 [Lenovo ThinkPad R60] Laptop too hot with radeon drivers
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]
** Changed in: linux (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1164557
Title:
1002:7145 [Lenovo ThinkPad R60] Laptop too hot with radeon drivers
Status in “linux” package in Ubuntu:
Expired
Bug description:
My laptop goes to very high temperature. First I think it was a fan
problem. I adjusted thinkfan to use the disengaged option. Now my fan
is at maximum speed if the temperature goes over 67°C. But still it is
not possible to run the laptop for a longer time an 100% CPU. It then
overheats and stops working. For example just after clamscan starts
working the fan is at maximum speed (5600 revolutions) and the
temperature goes up over 85°C, the CPU usage is the about 70%.
My standard governer is "ondemand". By using "powersave" the
temperature will be about 5-10°C decrease.
My investigation show me that in my opinion the VID is to high. To verify this I do the following:
- rdmsr -p0 [1] 0x0199 for every speed steps
- the governer "ondemand" switches the MSR 0x199 between
- 0x0613, which means 1GHz and 1.275V?
- 0x081c, which means 1,33GHz and 1.3875V?
- 0x0b28, which means 1,83GHz and 1.5375V?
> by 100% CPU the laptop overheats and stops
- set the governer to userspace 1.833GHz
- reduce the VID using: wrmsr -p0 [1] 0x0199 0x0b20
> the temperature goes not over 65°C by starting load that goes to 100% CPU!.
I see that the VID is always set to 0x0b28 when the governor change
the speed to the highest speed. I don't know if the governor or an
other kernel module set the VID The Sped (FID) is selected by the
governor.
WORKAROUND: Use the powersave CPU governor.
---
ApportVersion: 2.12.6-0ubuntu1
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3165 F.... pulseaudio
CasperVersion: 1.336ubuntu1
CurrentDmesg:
[ 71.182993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 71.185122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 71.982542] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 72.055058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 72.055518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
DistroRelease: Ubuntu 14.04
LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20131108)
MachineType: LENOVO 9461DXG
MarkForUpload: True
Package: linux (not installed)
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
ProcVersionSignature: Ubuntu 3.12.0-2.5-generic 3.12.0
RelatedPackageVersions:
linux-restricted-modules-3.12.0-2-generic N/A
linux-backports-modules-3.12.0-2-generic N/A
linux-firmware 1.117
Tags: trusty
Uname: Linux 3.12.0-2-generic i686
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
dmi.bios.date: 08/28/2009
dmi.bios.vendor: LENOVO
dmi.bios.version: 7CETD3WW (2.23 )
dmi.board.name: 9461DXG
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr7CETD3WW(2.23):bd08/28/2009:svnLENOVO:pn9461DXG:pvrThinkPadR60:rvnLENOVO:rn9461DXG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 9461DXG
dmi.product.version: ThinkPad R60
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions