kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #50015
[Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
I reproduced a similar result using test patch shown below.
---------- test patch start ----------
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 5653e50..eaaa5e2 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -1412,6 +1412,9 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return 0;
}
+ printk(KERN_WARNING "Sleep injection start\n");
+ ssleep(40);
+ printk(KERN_WARNING "Sleep injection end\n");
sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST));
if (!sh) {
diff --git a/kernel/signal.c b/kernel/signal.c
index 52f881d..52ec166 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1051,6 +1051,7 @@ static int __send_signal(int sig, struct siginfo *info, struct task_struct *t,
int override_rlimit;
int ret = 0, result;
+ WARN_ON(sig == SIGKILL);
assert_spin_locked(&t->sighand->siglock);
result = TRACE_SIGNAL_IGNORED;
---------- test patch end ----------
---------- dmesg start ----------
[ 2.665872] Fusion MPT base driver 3.04.20
[ 2.666876] Copyright (c) 1999-2008 LSI Corporation
[ 2.676334] Fusion MPT SPI Host driver 3.04.20
[ 2.679817] mptbase: ioc0: Initiating bringup
[ 2.692059] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.693733] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.761570] ioc0: LSI53C1030 B0: Capabilities={Initiator}
[ 2.919766] Sleep injection start
[ 3.062094] e1000 0000:02:00.0 eth0: (PCI:66MHz:32-bit) 00:0c:29:d7:20:d6
[ 3.064980] e1000 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 35.716117] ------------[ cut here ]------------
[ 35.718364] WARNING: CPU: 2 PID: 174 at kernel/signal.c:1054 __send_signal+0x476/0x4b0()
[ 35.722092] Modules linked in: e1000 mptspi(+) mptscsih mptbase floppy
[ 35.725666] CPU: 2 PID: 174 Comm: systemd-udevd Not tainted 3.14.0-rc5+ #267
[ 35.729478] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/20/2012
[ 35.734379] 0000000000000009 ffff8800377c5d50 ffffffff816f9669 0000000000000000
[ 35.738226] ffff8800377c5d88 ffffffff8106970d ffff88007a470000 0000000000000009
[ 35.742039] ffff8800377c5ec0 0000000000000001 0000000000000003 ffff8800377c5d98
[ 35.745852] Call Trace:
[ 35.747083] [<ffffffff816f9669>] dump_stack+0x45/0x56
[ 35.749482] [<ffffffff8106970d>] warn_slowpath_common+0x7d/0xa0
[ 35.752228] [<ffffffff810697ea>] warn_slowpath_null+0x1a/0x20
[ 35.754904] [<ffffffff8107ac66>] __send_signal+0x476/0x4b0
[ 35.757467] [<ffffffff8107acde>] send_signal+0x3e/0x80
[ 35.759889] [<ffffffff8107b753>] do_send_sig_info+0x43/0x80
[ 35.762490] [<ffffffff8107bc16>] group_send_sig_info+0x46/0x50
[ 35.764040] [<ffffffff8107bd24>] kill_pid_info+0x34/0x50
[ 35.765244] [<ffffffff8107bdee>] SYSC_kill+0x8e/0x1a0
[ 35.766360] [<ffffffff810a18db>] ? account_user_time+0x8b/0xa0
[ 35.767654] [<ffffffff810a1ef4>] ? vtime_account_user+0x54/0x60
[ 35.768946] [<ffffffff81022635>] ? syscall_trace_enter+0x145/0x250
[ 35.770298] [<ffffffff8107d9be>] SyS_kill+0xe/0x10
[ 35.771373] [<ffffffff8170aabf>] tracesys+0xe1/0xe6
[ 35.772455] ---[ end trace aeaeb4f8a60584a0 ]---
[ 42.921677] Sleep injection end
[ 42.923315] scsi2: error handler thread failed to spawn, error = -12
[ 42.926270] mptspi: ioc0: WARNING - Unable to register controller with SCSI subsystem
[ 42.929990] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060
[ 42.933846] IP: [<ffffffff816fff62>] mutex_lock+0x12/0x2f
[ 42.936484] PGD 7a453067 PUD 7a454067 PMD 0
[ 42.939242] Oops: 0002 [#1] SMP
[ 42.940874] Modules linked in: e1000 mptspi(+) mptscsih mptbase floppy
[ 42.944277] CPU: 0 PID: 181 Comm: systemd-udevd Tainted: G W 3.14.0-rc5+ #267
[ 42.947652] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/20/2012
[ 42.952471] task: ffff88007a470000 ti: ffff88007a478000 task.ti: ffff88007a478000
[ 42.954281] RIP: 0010:[<ffffffff816fff62>] [<ffffffff816fff62>] mutex_lock+0x12/0x2f
[ 42.955924] RSP: 0018:ffff88007a479b20 EFLAGS: 00010246
[ 42.957009] RAX: 0000000000000000 RBX: 0000000000000060 RCX: 0000000000001a42
[ 42.958398] RDX: 0000000000004090 RSI: 0000000040924090 RDI: 0000000000000060
[ 42.959853] RBP: ffff88007a479b28 R08: 0000000000000082 R09: 000000000000050c
[ 42.961323] R10: ffffffff8185b080 R11: 2049534353206874 R12: 0000000000000060
[ 42.962752] R13: ffff88007be19000 R14: 00000000ffffffff R15: 0000000000000001
[ 42.964164] FS: 00007f79226bd880(0000) GS:ffff88007fa00000(0000) knlGS:0000000000000000
[ 42.965755] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 42.966899] CR2: 0000000000000060 CR3: 000000007a452000 CR4: 00000000000407f0
[ 42.968333] Stack:
[ 42.969259] 0000000000000000 ffff88007a479b50 ffffffff814cd54d ffff88007abcf000
[ 42.970922] 0000000000000000 ffff88007be19000 ffff88007a479b80 ffffffffa003a2a1
[ 42.972674] ffff88007abcf000 ffff88007be19000 0000000000000000 00000000ffffffff
[ 42.974337] Call Trace:
[ 42.974868] [<ffffffff814cd54d>] scsi_remove_host+0x1d/0x120
[ 42.976106] [<ffffffffa003a2a1>] mptscsih_remove+0x31/0xc0 [mptscsih]
[ 42.977686] [<ffffffffa003423a>] mptspi_probe+0xfa/0x400 [mptspi]
[ 42.978964] [<ffffffff813a08f5>] local_pci_probe+0x45/0xa0
[ 42.980094] [<ffffffff813a1b95>] ? pci_match_device+0xc5/0xd0
[ 42.981276] [<ffffffff813a1cb9>] pci_device_probe+0xd9/0x130
[ 42.982410] [<ffffffff8148cfd5>] driver_probe_device+0x125/0x3b0
[ 42.983599] [<ffffffff8148d333>] __driver_attach+0x93/0xa0
[ 42.984770] [<ffffffff8148d2a0>] ? __device_attach+0x40/0x40
[ 42.985913] [<ffffffff8148af23>] bus_for_each_dev+0x63/0xa0
[ 42.987066] [<ffffffff8148c98e>] driver_attach+0x1e/0x20
[ 42.988167] [<ffffffff8148c570>] bus_add_driver+0x180/0x250
[ 42.989318] [<ffffffffa0045000>] ? 0xffffffffa0044fff
[ 42.990384] [<ffffffff8148d9b4>] driver_register+0x64/0xf0
[ 42.991888] [<ffffffffa0045000>] ? 0xffffffffa0044fff
[ 42.992944] [<ffffffff813a028c>] __pci_register_driver+0x4c/0x50
[ 42.994162] [<ffffffffa00450d7>] mptspi_init+0xd7/0x1000 [mptspi]
[ 42.995435] [<ffffffff81002142>] do_one_initcall+0xd2/0x180
[ 42.996594] [<ffffffff8105b743>] ? set_memory_nx+0x43/0x50
[ 42.997718] [<ffffffff810e7046>] load_module+0x1c86/0x26c0
[ 42.998834] [<ffffffff810e29e0>] ? store_uevent+0x40/0x40
[ 43.000119] [<ffffffff810e35ba>] ? copy_module_from_fd.isra.46+0x12a/0x190
[ 43.001528] [<ffffffff810e7bf6>] SyS_finit_module+0x86/0xb0
[ 43.002680] [<ffffffff8170aabf>] tracesys+0xe1/0xe6
[ 43.003695] Code: 65 6e 9b ff e9 40 ff ff ff b8 01 00 00 00 e9 8c fe ff ff 66 0f 1f 44 00 00 66 66 66 66 90 55 48 89 e5 53 48 89 fb e8 9e df ff ff <f0> ff 0b 79 08 48 89 df e8 31 fe ff ff 65 48 8b 04 25 00 c8 00
[ 43.010886] RIP [<ffffffff816fff62>] mutex_lock+0x12/0x2f
[ 43.012085] RSP <ffff88007a479b20>
[ 43.012823] CR2: 0000000000000060
[ 43.013556] ---[ end trace aeaeb4f8a60584a1 ]---
---------- dmesg end ----------
It is systemd-udevd process who is sending SIGKILL to worker
systemd-udevd process who is waiting for finit_module() to complete.
We can see that systemd-udevd has hard-coded 30 seconds timeout.
---------- systemd-204/src/udev/udevd.c start ----------
(...snipped...)
/* check for hanging events */
udev_list_node_foreach(loop, &worker_list) {
struct worker *worker = node_to_worker(loop);
if (worker->state != WORKER_RUNNING)
continue;
if ((now(CLOCK_MONOTONIC) - worker->event_start_usec) > 30 * 1000 * 1000) {
log_error("worker [%u] %s timeout; kill it\n", worker->pid,
worker->event ? worker->event->devpath : "<idle>");
kill(worker->pid, SIGKILL);
worker->state = WORKER_KILLED;
/* drop reference taken for state 'running' */
worker_unref(worker);
if (worker->event) {
log_error("seq %llu '%s' killed\n",
udev_device_get_seqnum(worker->event->dev), worker->event->devpath);
worker->event->exitcode = -64;
event_queue_delete(worker->event, true);
worker->event = NULL;
}
}
}
(...snipped...)
---------- systemd-204/src/udev/udevd.c end ----------
Therefore, we cannot override this timeout without modifying udevd.c .
It is unfortunate but we have to let kthread_create() ignore SIGKILL
(unless killed by the OOM killer).
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1276705
Title:
Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
Status in “linux” package in Ubuntu:
Confirmed
Status in “linux” source package in Trusty:
Confirmed
Bug description:
We have recently upgraded an Dell R300 server to Trusty (was running
fine in precise), and after upgrade it fail to boot.
It is an issue with the SAS controller during the initilisation. It
fail to detect the disk, we have the following error in console log:
[ 36.539955] scsi4: error handler thread failed to spawn, error = -12
[ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem
After this error, initramfs drop to a shell complaining that rootfs is
not found. No disk is seen at all (cat /proc/partition only show sr0 -
cdrom drive).
We have this issue with two different server (both R300, both Dell SAS
6/iR controller and same hardware).
We don't have this issue with another Dell server (R310, Dell PERC
H200).
We also tester with old kernel (generic, 3.2.0-58.88), it is working.
Those server need a greater rootdelay (probably #579572), so we have
rootdelay=45. If we remove rootdelay=45, then disk are correctly
recognized ! (but few second too late, initramfs dropped to a shell.
Pressing control-D resume normal boot)
So the issue is that with the (mandatory) rootdelay greater that 30
(default value I think), the disk are not detected due to the error
shown above. This is a regression since those server worked in precise
(and work with precise old kernel).
System information
* Dell R300 with Dell SAS 6/iR controller
* Ubuntu Trusty Tahr (14.04)
* Running arch: x86_64
* Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25)
* Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet
* uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
Attached files:
* console output when error occure.
* dmesg when system boot (no rootdelay, need to press control-d during initramfs boot)
* lspci -vnn
Tell me if you need more informations.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions
References
