kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #50583
[Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
I've tested with kernel from comment #56.
The kernel generated too much logs for IPMI serial console (which
generated too much garbage), so I switched to a real serial console (and
at 115kbauds).
I've attached a archive with 3 runs (the last run it the most
interesting I think):
First run with serial console and a bigger kernel log buffer (log_buf_len=8M).
The hope with larger log buffer was to catch full kernel message with dmesg once server is running.
Sadly, after about 30 minutes, server was still printing stacks.
Serial console capture attached under name "01-serial-capture-large-buffer.txt"
Second run, still with serial console but with default kernel log (no log_buf_len)
This time, kernel booted fine (with exception to disk beeing discovered after rootdelay, but a ctrl+d resumed the boot process).
Note: this boot generated WAY less message and booted. The only change is the log_buf_len=8M present or not.
Serial console capture attached under name "02-serial-capture-default-buffer.txt"
Third run, this time with serial console disabled and very large kernel log buffer (log_buf_len=32M).
Probably the most interesting one, dmesg was complete (include very first messages). It is 12 MB large !
Server booted without any issue (disk detected before the end of rootdelay).
** Attachment added: "Logs when running kernel from comment #56"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+attachment/4033864/+files/logs-3.14.0-031400rc7.201403191557.tar.xz
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1276705
Title:
Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
Status in “linux” package in Ubuntu:
Confirmed
Status in “linux” source package in Trusty:
Confirmed
Bug description:
We have recently upgraded an Dell R300 server to Trusty (was running
fine in precise), and after upgrade it fail to boot.
It is an issue with the SAS controller during the initilisation. It
fail to detect the disk, we have the following error in console log:
[ 36.539955] scsi4: error handler thread failed to spawn, error = -12
[ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem
After this error, initramfs drop to a shell complaining that rootfs is
not found. No disk is seen at all (cat /proc/partition only show sr0 -
cdrom drive).
We have this issue with two different server (both R300, both Dell SAS
6/iR controller and same hardware).
We don't have this issue with another Dell server (R310, Dell PERC
H200).
We also tester with old kernel (generic, 3.2.0-58.88), it is working.
Those server need a greater rootdelay (probably #579572), so we have
rootdelay=45. If we remove rootdelay=45, then disk are correctly
recognized ! (but few second too late, initramfs dropped to a shell.
Pressing control-D resume normal boot)
So the issue is that with the (mandatory) rootdelay greater that 30
(default value I think), the disk are not detected due to the error
shown above. This is a regression since those server worked in precise
(and work with precise old kernel).
System information
* Dell R300 with Dell SAS 6/iR controller
* Ubuntu Trusty Tahr (14.04)
* Running arch: x86_64
* Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25)
* Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet
* uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
Attached files:
* console output when error occure.
* dmesg when system boot (no rootdelay, need to press control-d during initramfs boot)
* lspci -vnn
Tell me if you need more informations.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions
References