kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #51035
[Bug 1296263] Re: gnome-power-manager may be related to black screen and auto-power-on noise and Xorg crash
apport information
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
** Description changed:
Hello,
My HP Compaq Presario CQ70 a very old portable computer notebook have
been having black screens some sessions after being used from Precise to
Saucy.
Yesterday I just had Precise being installed. But this morning black
screen. And also a very weird part to explain. You might believe in the
weird part or not but I say as it is since it occured already twice and
I used pc twice today.
lsb_release -c -d && uname -s -r && lspci | grep -i VGA
Description: Ubuntu 12.04.4 LTS
Codename: precise
Linux 3.11.0-18-generic
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
sudo dpkg -s gnome-power-manager
Package: gnome-power-manager
Status: purge ok installed
Priority: optional
Section: gnome
Installed-Size: 1584
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@xxxxxxxxxxxxxxxx>
Architecture: i386
Version: 3.4.0-0ubuntu1.1
etc.
Last lost of Precise this morning:
- Even thought I had tooken out big battery (material) some years ago from my pc, this morning he made some noise alone, without being on electricity power and without battery, not being other PC at home (I checked they were off), true noise when my PC is working, so I deduced my old PC had become photo-voltaïc like solar panels, it tryed to turn on alone with morning sun light.
- Then when I put electricity on, it tryed alone to login Ubuntu with laptop closed. I heard Ubuntu welcome noise sound, so I opened laptop. I did not touch on/off button. Then what I saw was white mouse on black screen. Deduction: Xorg crashed.
- Then when I pulled OFF button to shut him up, then re-start, he restarted on black screen in silence, except for the internal noise. No Ubuntu welcome noise.
- Then when I took out electricity cable to restart it (since it thinks one method is the other one), it restarted (without the ON button) on the black screen in silence (except for usual internal noise).
- Then I restarted it and I re-installed Precise from USB in blind because I have external monitor/screen/display so I had to memorize BIOS in a blind way, since it doesn't appears in external monitor.
- More info: I had put xdiagnose at beginning, and none of the time he did the internal noise before black screen, he did put xdiagnose output on screen before BIOS question that I can't see. Before he did put just at start xdiagnose.
-
Result: He only support a few sessions before going black screen.
Conclusion: He mistakes ON / OFF / SLEEP / WORK
Than I took some info. Even downloaded it, but couldn't put it on
external USB. So I have it in my e-mail, all ancient logs of errors or
not. And also posted some: Precise while not OK, and Precise in USB new.
I'll post you later.
So this morning, after Precise beeing installed. Noticed again, when came back to living room. Noice, but very very low and no battery and no electricity. If my living room was little more noisy, I wouldn't have noticed. PC is off, no electricity, no battery and yet, very very low 3 noise types:
- the continuous noise
- two times a noise at right (Enter and numbers side)
- - once a noise at right, the one when we got PC ON
+ - once a noise at left, the one when we got PC ON
- no lights
All almost not audible, very very low. Could be my memory neurones that memorized thoses noises or my PC had become photo-voltaïc ? PC is old so could also be material problems.
So now for bug analysis, data you undersatand.
Joined log.tar.gz so you can see errors.
Only seen error that has to do with you, also present in this brand new Precise is:
- *-power UNCLAIMED
- description: OEM_Define1
- product: OEM_Define4
- vendor: OEM_Define2
- physical id: 1
- version: OEM_Define5
- serial: OEM_Define2
- capacity: 75mWh
+ *-power UNCLAIMED
+ description: OEM_Define1
+ product: OEM_Define4
+ vendor: OEM_Define2
+ physical id: 1
+ version: OEM_Define5
+ serial: OEM_Define2
+ capacity: 75mWh
***************************************************************************************************
Answering Launchpad questions
cat /proc/version_signature
Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4
sudo lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=0a <?>
- Kernel driver in use: agpgart-intel
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
+ Latency: 0
+ Capabilities: [e0] Vendor Specific Information: Len=0a <?>
+ Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 44
- Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
- Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
- Region 4: I/O ports at 5110 [size=8]
- Expansion ROM at <unassigned> [disabled]
- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0100c Data: 4122
- Capabilities: [d0] Power Management version 3
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: i915
- Kernel modules: i915
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 44
+ Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
+ Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
+ Region 4: I/O ports at 5110 [size=8]
+ Expansion ROM at <unassigned> [disabled]
+ Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
+ Address: fee0100c Data: 4122
+ Capabilities: [d0] Power Management version 3
+ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Kernel driver in use: i915
+ Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Region 0: Memory at 92500000 (64-bit, non-prefetchable) [size=1M]
- Capabilities: [d0] Power Management version 3
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Region 0: Memory at 92500000 (64-bit, non-prefetchable) [size=1M]
+ Capabilities: [d0] Power Management version 3
+ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 18
- Region 4: I/O ports at 50e0 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 18
+ Region 4: I/O ports at 50e0 [size=32]
+ Capabilities: [50] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 19
- Region 4: I/O ports at 50c0 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin B routed to IRQ 19
+ Region 4: I/O ports at 50c0 [size=32]
+ Capabilities: [50] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 17
- Region 4: I/O ports at 50a0 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin C routed to IRQ 17
+ Region 4: I/O ports at 50a0 [size=32]
+ Capabilities: [50] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 18
- Region 0: Memory at 94705c00 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Capabilities: [98] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ehci-pci
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin D routed to IRQ 18
+ Region 0: Memory at 94705c00 (32-bit, non-prefetchable) [size=1K]
+ Capabilities: [50] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [58] Debug port: BAR=1 offset=00a0
+ Capabilities: [98] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 45
- Region 0: Memory at 94700000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0100c Data: 4152
- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE- FLReset+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=7f
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
- Status: NegoPending- InProgress-
- Capabilities: [130 v1] Root Complex Link
- Desc: PortNumber=0f ComponentID=02 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: snd_hda_intel
- Kernel modules: snd-hda-intel
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 64 bytes
+ Interrupt: pin A routed to IRQ 45
+ Region 0: Memory at 94700000 (64-bit, non-prefetchable) [size=16K]
+ Capabilities: [50] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
+ Address: 00000000fee0100c Data: 4152
+ Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+ ExtTag- RBE- FLReset+
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
+ ClockPM- Surprise- LLActRep- BwNot-
+ LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
+ Capabilities: [100 v1] Virtual Channel
+ Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
+ Arb: Fixed- WRR32- WRR64- WRR128-
+ Ctrl: ArbSelect=Fixed
+ Status: InProgress-
+ VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=7f
+ Status: NegoPending- InProgress-
+ VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
+ Status: NegoPending- InProgress-
+ Capabilities: [130 v1] Root Complex Link
+ Desc: PortNumber=0f ComponentID=02 EltType=Config
+ Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
+ Addr: 00000000fed1c000
+ Kernel driver in use: snd_hda_intel
+ Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 00003000-00004fff
- Memory behind bridge: 93700000-946fffff
- Prefetchable memory behind bridge: 0000000090400000-00000000914fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet- LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 4191
- Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=01 ComponentID=02 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: pcieport
- Kernel modules: shpchp
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 64 bytes
+ Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
+ I/O behind bridge: 00003000-00004fff
+ Memory behind bridge: 93700000-946fffff
+ Prefetchable memory behind bridge: 0000000090400000-00000000914fffff
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+ ExtTag- RBE+ FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
+ ClockPM- Surprise- LLActRep+ BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
+ SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
+ Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
+ Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ Changed: MRL- PresDet- LinkState+
+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
+ RootCap: CRSVisible-
+ RootSta: PME ReqID 0000, PMEStatus- PMEPending-
+ Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
+ Address: fee0300c Data: 4191
+ Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Capabilities: [a0] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [100 v1] Virtual Channel
+ Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
+ Arb: Fixed+ WRR32- WRR64- WRR128-
+ Ctrl: ArbSelect=Fixed
+ Status: InProgress-
+ VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
+ Status: NegoPending- InProgress-
+ Capabilities: [180 v1] Root Complex Link
+ Desc: PortNumber=01 ComponentID=02 EltType=Config
+ Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
+ Addr: 00000000fed1c000
+ Kernel driver in use: pcieport
+ Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 00002000-00002fff
- Memory behind bridge: 92600000-936fffff
- Prefetchable memory behind bridge: 0000000091500000-00000000924fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet- LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 41a1
- Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=02 ComponentID=02 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: pcieport
- Kernel modules: shpchp
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 64 bytes
+ Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
+ I/O behind bridge: 00002000-00002fff
+ Memory behind bridge: 92600000-936fffff
+ Prefetchable memory behind bridge: 0000000091500000-00000000924fffff
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+ ExtTag- RBE+ FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
+ ClockPM- Surprise- LLActRep+ BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
+ SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
+ Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
+ Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ Changed: MRL- PresDet- LinkState+
+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
+ RootCap: CRSVisible-
+ RootSta: PME ReqID 0000, PMEStatus- PMEPending-
+ Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
+ Address: fee0300c Data: 41a1
+ Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Capabilities: [a0] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [100 v1] Virtual Channel
+ Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
+ Arb: Fixed+ WRR32- WRR64- WRR128-
+ Ctrl: ArbSelect=Fixed
+ Status: InProgress-
+ VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
+ Status: NegoPending- InProgress-
+ Capabilities: [180 v1] Root Complex Link
+ Desc: PortNumber=02 ComponentID=02 EltType=Config
+ Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
+ Addr: 00000000fed1c000
+ Kernel driver in use: pcieport
+ Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 18
- Region 4: I/O ports at 5080 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin B routed to IRQ 18
+ Region 4: I/O ports at 5080 [size=32]
+ Capabilities: [50] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 19
- Region 4: I/O ports at 5060 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin C routed to IRQ 19
+ Region 4: I/O ports at 5060 [size=32]
+ Capabilities: [50] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 17
- Region 4: I/O ports at 5040 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin D routed to IRQ 17
+ Region 4: I/O ports at 5040 [size=32]
+ Capabilities: [50] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 18
- Region 0: Memory at 94705800 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Capabilities: [98] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ehci-pci
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin B routed to IRQ 18
+ Region 0: Memory at 94705800 (32-bit, non-prefetchable) [size=1K]
+ Capabilities: [50] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [58] Debug port: BAR=1 offset=00a0
+ Capabilities: [98] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
+ Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+ BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:360b]
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=0c <?>
- Kernel driver in use: lpc_ich
- Kernel modules: lpc_ich
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Capabilities: [e0] Vendor Specific Information: Len=0c <?>
+ Kernel driver in use: lpc_ich
+ Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 42
- Region 0: I/O ports at 5108 [size=8]
- Region 1: I/O ports at 511c [size=4]
- Region 2: I/O ports at 5100 [size=8]
- Region 3: I/O ports at 5118 [size=4]
- Region 4: I/O ports at 5020 [size=32]
- Region 5: Memory at 94705000 (32-bit, non-prefetchable) [size=2K]
- Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
- Address: fee0100c Data: 41c1
- Capabilities: [70] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
- Capabilities: [b0] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ahci
- Kernel modules: ahci
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin B routed to IRQ 42
+ Region 0: I/O ports at 5108 [size=8]
+ Region 1: I/O ports at 511c [size=4]
+ Region 2: I/O ports at 5100 [size=8]
+ Region 3: I/O ports at 5118 [size=4]
+ Region 4: I/O ports at 5020 [size=32]
+ Region 5: Memory at 94705000 (32-bit, non-prefetchable) [size=2K]
+ Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
+ Address: fee0100c Data: 41c1
+ Capabilities: [70] Power Management version 3
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
+ Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
+ Capabilities: [b0] PCI Advanced Features
+ AFCap: TP+ FLR+
+ AFCtrl: FLR-
+ AFStatus: TP-
+ Kernel driver in use: ahci
+ Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin C routed to IRQ 11
- Region 0: Memory at 94706000 (64-bit, non-prefetchable) [size=256]
- Region 4: I/O ports at 5000 [size=32]
- Kernel modules: i2c-i801
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Interrupt: pin C routed to IRQ 11
+ Region 0: Memory at 94706000 (64-bit, non-prefetchable) [size=256]
+ Region 4: I/O ports at 5000 [size=32]
+ Kernel modules: i2c-i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin C routed to IRQ 11
- Region 0: Memory at 94704000 (64-bit, non-prefetchable) [size=4K]
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Interrupt: pin C routed to IRQ 11
+ Region 0: Memory at 94704000 (64-bit, non-prefetchable) [size=4K]
+ Capabilities: [50] Power Management version 3
+ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
- Subsystem: Hewlett-Packard Company Device [103c:360b]
- Physical Slot: 0
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 43
- Region 0: I/O ports at 3000 [size=256]
- Region 2: Memory at 90410000 (64-bit, prefetchable) [size=4K]
- Region 4: Memory at 90400000 (64-bit, prefetchable) [size=64K]
- Expansion ROM at 90420000 [disabled] [size=128K]
- Capabilities: [40] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0200c Data: 41e1
- Capabilities: [70] Express (v2) Endpoint, MSI 01
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
- ClockPM+ Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis+
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB
- Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
- Vector table: BAR=4 offset=00000000
- PBA: BAR=4 offset=00000800
- Capabilities: [cc] Vital Product Data
- Unknown small resource type 00, will not decode more.
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
- Capabilities: [140 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [160 v1] Device Serial Number 09-00-00-00-ff-ff-00-00
- Kernel driver in use: r8169
- Kernel modules: r8169
+ Subsystem: Hewlett-Packard Company Device [103c:360b]
+ Physical Slot: 0
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 64 bytes
+ Interrupt: pin A routed to IRQ 43
+ Region 0: I/O ports at 3000 [size=256]
+ Region 2: Memory at 90410000 (64-bit, prefetchable) [size=4K]
+ Region 4: Memory at 90400000 (64-bit, prefetchable) [size=64K]
+ Expansion ROM at 90420000 [disabled] [size=128K]
+ Capabilities: [40] Power Management version 3
+ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+ Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
+ Address: 00000000fee0200c Data: 41e1
+ Capabilities: [70] Express (v2) Endpoint, MSI 01
+ DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
+ ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 4096 bytes
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
+ LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
+ ClockPM+ Surprise- LLActRep- BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ DevCap2: Completion Timeout: Not Supported, TimeoutDis+
+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
+ LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
+ Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
+ Compliance De-emphasis: -6dB
+ LnkSta2: Current De-emphasis Level: -6dB
+ Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
+ Vector table: BAR=4 offset=00000000
+ PBA: BAR=4 offset=00000800
+ Capabilities: [cc] Vital Product Data
+ Unknown small resource type 00, will not decode more.
+ Capabilities: [100 v1] Advanced Error Reporting
+ UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+ UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+ UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
+ CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
+ Capabilities: [140 v1] Virtual Channel
+ Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
+ Arb: Fixed- WRR32- WRR64- WRR128-
+ Ctrl: ArbSelect=Fixed
+ Status: InProgress-
+ VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
+ Status: NegoPending- InProgress-
+ Capabilities: [160 v1] Device Serial Number 09-00-00-00-ff-ff-00-00
+ Kernel driver in use: r8169
+ Kernel modules: r8169
02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
- Subsystem: Hewlett-Packard Company Device [103c:137b]
- Physical Slot: 1
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 17
- Region 0: Memory at 92600000 (64-bit, non-prefetchable) [size=64K]
- Capabilities: [40] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
- Address: 00000000 Data: 0000
- Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [90] MSI-X: Enable- Count=1 Masked-
- Vector table: BAR=0 offset=00000000
- PBA: BAR=0 offset=00000000
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
- Capabilities: [140 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Kernel driver in use: ath5k
- Kernel modules: ath5k
+ Subsystem: Hewlett-Packard Company Device [103c:137b]
+ Physical Slot: 1
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 64 bytes
+ Interrupt: pin A routed to IRQ 17
+ Region 0: Memory at 92600000 (64-bit, non-prefetchable) [size=64K]
+ Capabilities: [40] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
+ Address: 00000000 Data: 0000
+ Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
+ ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 512 bytes
+ DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
+ LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
+ ClockPM- Surprise- LLActRep- BwNot-
+ LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ Capabilities: [90] MSI-X: Enable- Count=1 Masked-
+ Vector table: BAR=0 offset=00000000
+ PBA: BAR=0 offset=00000000
+ Capabilities: [100 v1] Advanced Error Reporting
+ UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
+ UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+ UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
+ CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
+ Capabilities: [140 v1] Virtual Channel
+ Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
+ Arb: Fixed- WRR32- WRR64- WRR128-
+ Ctrl: ArbSelect=Fixed
+ Status: InProgress-
+ VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
+ Status: NegoPending- InProgress-
+ Kernel driver in use: ath5k
+ Kernel modules: ath5k
** Tags added: apport-collected precise running-unity
** Description changed:
Hello,
My HP Compaq Presario CQ70 a very old portable computer notebook have
been having black screens some sessions after being used from Precise to
Saucy.
Yesterday I just had Precise being installed. But this morning black
screen. And also a very weird part to explain. You might believe in the
weird part or not but I say as it is since it occured already twice and
I used pc twice today.
lsb_release -c -d && uname -s -r && lspci | grep -i VGA
Description: Ubuntu 12.04.4 LTS
Codename: precise
Linux 3.11.0-18-generic
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
sudo dpkg -s gnome-power-manager
Package: gnome-power-manager
Status: purge ok installed
Priority: optional
Section: gnome
Installed-Size: 1584
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@xxxxxxxxxxxxxxxx>
Architecture: i386
Version: 3.4.0-0ubuntu1.1
etc.
Last lost of Precise this morning:
- Even thought I had tooken out big battery (material) some years ago from my pc, this morning he made some noise alone, without being on electricity power and without battery, not being other PC at home (I checked they were off), true noise when my PC is working, so I deduced my old PC had become photo-voltaïc like solar panels, it tryed to turn on alone with morning sun light.
- Then when I put electricity on, it tryed alone to login Ubuntu with laptop closed. I heard Ubuntu welcome noise sound, so I opened laptop. I did not touch on/off button. Then what I saw was white mouse on black screen. Deduction: Xorg crashed.
- Then when I pulled OFF button to shut him up, then re-start, he restarted on black screen in silence, except for the internal noise. No Ubuntu welcome noise.
- Then when I took out electricity cable to restart it (since it thinks one method is the other one), it restarted (without the ON button) on the black screen in silence (except for usual internal noise).
- Then I restarted it and I re-installed Precise from USB in blind because I have external monitor/screen/display so I had to memorize BIOS in a blind way, since it doesn't appears in external monitor.
- More info: I had put xdiagnose at beginning, and none of the time he did the internal noise before black screen, he did put xdiagnose output on screen before BIOS question that I can't see. Before he did put just at start xdiagnose.
Result: He only support a few sessions before going black screen.
Conclusion: He mistakes ON / OFF / SLEEP / WORK
Than I took some info. Even downloaded it, but couldn't put it on
external USB. So I have it in my e-mail, all ancient logs of errors or
not. And also posted some: Precise while not OK, and Precise in USB new.
I'll post you later.
So this morning, after Precise beeing installed. Noticed again, when came back to living room. Noice, but very very low and no battery and no electricity. If my living room was little more noisy, I wouldn't have noticed. PC is off, no electricity, no battery and yet, very very low 3 noise types:
- the continuous noise
- two times a noise at right (Enter and numbers side)
- once a noise at left, the one when we got PC ON
- no lights
All almost not audible, very very low. Could be my memory neurones that memorized thoses noises or my PC had become photo-voltaïc ? PC is old so could also be material problems.
So now for bug analysis, data you undersatand.
Joined log.tar.gz so you can see errors.
Only seen error that has to do with you, also present in this brand new Precise is:
*-power UNCLAIMED
description: OEM_Define1
product: OEM_Define4
vendor: OEM_Define2
physical id: 1
version: OEM_Define5
serial: OEM_Define2
capacity: 75mWh
***************************************************************************************************
Answering Launchpad questions
cat /proc/version_signature
Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4
sudo lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4122
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 92500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at 50e0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 50c0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 17
Region 4: I/O ports at 50a0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 18
Region 0: Memory at 94705c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 94700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4152
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=7f
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: 93700000-946fffff
Prefetchable memory behind bridge: 0000000090400000-00000000914fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 92600000-936fffff
Prefetchable memory behind bridge: 0000000091500000-00000000924fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41a1
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 5080 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 5060 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 17
Region 4: I/O ports at 5040 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: Memory at 94705800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:360b]
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 5108 [size=8]
Region 1: I/O ports at 511c [size=4]
Region 2: I/O ports at 5100 [size=8]
Region 3: I/O ports at 5118 [size=4]
Region 4: I/O ports at 5020 [size=32]
Region 5: Memory at 94705000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee0100c Data: 41c1
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at 94706000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5000 [size=32]
Kernel modules: i2c-i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at 94704000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at 90410000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 90400000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 90420000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0200c Data: 41e1
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 09-00-00-00-ff-ff-00-00
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:137b]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 92600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] MSI-X: Enable- Count=1 Masked-
Vector table: BAR=0 offset=00000000
PBA: BAR=0 offset=00000000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Kernel driver in use: ath5k
Kernel modules: ath5k
+ ---
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-18-generic.
+ ApportVersion: 2.0.1-0ubuntu17.6
+ Architecture: i386
+ ArecordDevices:
+ **** List of CAPTURE Hardware Devices ****
+ card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
+ Subdevices: 1/1
+ Subdevice #0: subdevice #0
+ AudioDevicesInUse:
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC0: fairy 1681 F.... pulseaudio
+ CRDA: Error: [Errno 2] No such file or directory
+ Card0.Amixer.info:
+ Card hw:0 'Intel'/'HDA Intel at 0x94700000 irq 45'
+ Mixer name : 'Intel Cantiga HDMI'
+ Components : 'HDA:14f15051,103c360b,00100000 HDA:80862802,80860101,00100000'
+ Controls : 24
+ Simple ctrls : 8
+ DistroRelease: Ubuntu 12.04
+ HibernationDevice: RESUME=UUID=3a85c667-fedd-4c43-abbf-b8a83f35d544
+ InstallationMedia: Ubuntu 12.04.4 LTS "Precise Pangolin" - Release i386 (20140204)
+ MachineType: Hewlett-Packard Compaq Presario CQ70 Notebook PC
+ MarkForUpload: True
+ Package: linux (not installed)
+ ProcEnviron:
+ TERM=xterm
+ PATH=(custom, no user)
+ LANG=en_US.UTF-8
+ SHELL=/bin/bash
+ ProcFB: 0 inteldrmfb
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=f4f167c6-249f-4d51-8c8f-0a4d9bc78a48 ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4
+ RelatedPackageVersions:
+ linux-restricted-modules-3.11.0-18-generic N/A
+ linux-backports-modules-3.11.0-18-generic N/A
+ linux-firmware 1.79.10
+ RfKill:
+ 0: phy0: Wireless LAN
+ Soft blocked: no
+ Hard blocked: no
+ Tags: precise running-unity
+ Uname: Linux 3.11.0-18-generic i686
+ UpgradeStatus: No upgrade log present (probably fresh install)
+ UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
+ dmi.bios.date: 10/01/2008
+ dmi.bios.vendor: Hewlett-Packard
+ dmi.bios.version: F.26
+ dmi.board.asset.tag: Base Board Asset Tag
+ dmi.board.name: 360C
+ dmi.board.vendor: Wistron
+ dmi.board.version: 09.45
+ dmi.chassis.asset.tag: Chassis Asset Tag
+ dmi.chassis.type: 10
+ dmi.chassis.vendor: Wistron
+ dmi.chassis.version: Chassis Version
+ dmi.modalias: dmi:bvnHewlett-Packard:bvrF.26:bd10/01/2008:svnHewlett-Packard:pnCompaqPresarioCQ70NotebookPC:pvrF.26:rvnWistron:rn360C:rvr09.45:cvnWistron:ct10:cvrChassisVersion:
+ dmi.product.name: Compaq Presario CQ70 Notebook PC
+ dmi.product.version: F.26
+ dmi.sys.vendor: Hewlett-Packard
** Attachment added: "AcpiTables.txt"
https://bugs.launchpad.net/bugs/1296263/+attachment/4038823/+files/AcpiTables.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1296263
Title:
gnome-power-manager may be related to black screen and auto-power-on
noise and Xorg crash
Status in “linux” package in Ubuntu:
Confirmed
Bug description:
Hello,
My HP Compaq Presario CQ70 a very old portable computer notebook have
been having black screens some sessions after being used from Precise
to Saucy.
Yesterday I just had Precise being installed. But this morning black
screen. And also a very weird part to explain. You might believe in
the weird part or not but I say as it is since it occured already
twice and I used pc twice today.
lsb_release -c -d && uname -s -r && lspci | grep -i VGA
Description: Ubuntu 12.04.4 LTS
Codename: precise
Linux 3.11.0-18-generic
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
sudo dpkg -s gnome-power-manager
Package: gnome-power-manager
Status: purge ok installed
Priority: optional
Section: gnome
Installed-Size: 1584
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@xxxxxxxxxxxxxxxx>
Architecture: i386
Version: 3.4.0-0ubuntu1.1
etc.
Last lost of Precise this morning:
- Even thought I had tooken out big battery (material) some years ago from my pc, this morning he made some noise alone, without being on electricity power and without battery, not being other PC at home (I checked they were off), true noise when my PC is working, so I deduced my old PC had become photo-voltaïc like solar panels, it tryed to turn on alone with morning sun light.
- Then when I put electricity on, it tryed alone to login Ubuntu with laptop closed. I heard Ubuntu welcome noise sound, so I opened laptop. I did not touch on/off button. Then what I saw was white mouse on black screen. Deduction: Xorg crashed.
- Then when I pulled OFF button to shut him up, then re-start, he restarted on black screen in silence, except for the internal noise. No Ubuntu welcome noise.
- Then when I took out electricity cable to restart it (since it thinks one method is the other one), it restarted (without the ON button) on the black screen in silence (except for usual internal noise).
- Then I restarted it and I re-installed Precise from USB in blind because I have external monitor/screen/display so I had to memorize BIOS in a blind way, since it doesn't appears in external monitor.
- More info: I had put xdiagnose at beginning, and none of the time he did the internal noise before black screen, he did put xdiagnose output on screen before BIOS question that I can't see. Before he did put just at start xdiagnose.
Result: He only support a few sessions before going black screen.
Conclusion: He mistakes ON / OFF / SLEEP / WORK
Than I took some info. Even downloaded it, but couldn't put it on
external USB. So I have it in my e-mail, all ancient logs of errors or
not. And also posted some: Precise while not OK, and Precise in USB
new. I'll post you later.
So this morning, after Precise beeing installed. Noticed again, when came back to living room. Noice, but very very low and no battery and no electricity. If my living room was little more noisy, I wouldn't have noticed. PC is off, no electricity, no battery and yet, very very low 3 noise types:
- the continuous noise
- two times a noise at right (Enter and numbers side)
- once a noise at left, the one when we got PC ON
- no lights
All almost not audible, very very low. Could be my memory neurones that memorized thoses noises or my PC had become photo-voltaïc ? PC is old so could also be material problems.
So now for bug analysis, data you undersatand.
Joined log.tar.gz so you can see errors.
Only seen error that has to do with you, also present in this brand new Precise is:
*-power UNCLAIMED
description: OEM_Define1
product: OEM_Define4
vendor: OEM_Define2
physical id: 1
version: OEM_Define5
serial: OEM_Define2
capacity: 75mWh
***************************************************************************************************
Answering Launchpad questions
cat /proc/version_signature
Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4
sudo lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4122
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 92500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at 50e0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 50c0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 17
Region 4: I/O ports at 50a0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 18
Region 0: Memory at 94705c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 94700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4152
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=7f
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: 93700000-946fffff
Prefetchable memory behind bridge: 0000000090400000-00000000914fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 92600000-936fffff
Prefetchable memory behind bridge: 0000000091500000-00000000924fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41a1
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 5080 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 5060 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 17
Region 4: I/O ports at 5040 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: Memory at 94705800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:360b]
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 5108 [size=8]
Region 1: I/O ports at 511c [size=4]
Region 2: I/O ports at 5100 [size=8]
Region 3: I/O ports at 5118 [size=4]
Region 4: I/O ports at 5020 [size=32]
Region 5: Memory at 94705000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee0100c Data: 41c1
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at 94706000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5000 [size=32]
Kernel modules: i2c-i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at 94704000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at 90410000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 90400000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 90420000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0200c Data: 41e1
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 09-00-00-00-ff-ff-00-00
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:137b]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 92600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] MSI-X: Enable- Count=1 Masked-
Vector table: BAR=0 offset=00000000
PBA: BAR=0 offset=00000000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Kernel driver in use: ath5k
Kernel modules: ath5k
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-18-generic.
ApportVersion: 2.0.1-0ubuntu17.6
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: fairy 1681 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0x94700000 irq 45'
Mixer name : 'Intel Cantiga HDMI'
Components : 'HDA:14f15051,103c360b,00100000 HDA:80862802,80860101,00100000'
Controls : 24
Simple ctrls : 8
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=3a85c667-fedd-4c43-abbf-b8a83f35d544
InstallationMedia: Ubuntu 12.04.4 LTS "Precise Pangolin" - Release i386 (20140204)
MachineType: Hewlett-Packard Compaq Presario CQ70 Notebook PC
MarkForUpload: True
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=f4f167c6-249f-4d51-8c8f-0a4d9bc78a48 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4
RelatedPackageVersions:
linux-restricted-modules-3.11.0-18-generic N/A
linux-backports-modules-3.11.0-18-generic N/A
linux-firmware 1.79.10
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Tags: precise running-unity
Uname: Linux 3.11.0-18-generic i686
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
dmi.bios.date: 10/01/2008
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.26
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 360C
dmi.board.vendor: Wistron
dmi.board.version: 09.45
dmi.chassis.asset.tag: Chassis Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: Wistron
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.26:bd10/01/2008:svnHewlett-Packard:pnCompaqPresarioCQ70NotebookPC:pvrF.26:rvnWistron:rn360C:rvr09.45:cvnWistron:ct10:cvrChassisVersion:
dmi.product.name: Compaq Presario CQ70 Notebook PC
dmi.product.version: F.26
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1296263/+subscriptions
References