← Back to team overview

kernel-packages team mailing list archive

[Bug 1297430] Status changed to Confirmed

 

This change was made by a bot.

** Changed in: linux (Ubuntu)
       Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1297430

Title:
  [Dell Inc. Dell System XPS L321X] late resume failure

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  opened up my laptop and nothing happened, was forced to restart

  Description:	Ubuntu Trusty Tahr (development branch)
  Release:	14.04

  linux-image-generic:
    Installed: 3.13.0.19.23
    Candidate: 3.13.0.19.23
    Version table:
   *** 3.13.0.19.23 0
          500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages
          100 /var/lib/dpkg/status

  Ubuntu 3.13.0-19.40-generic 3.13.6

  00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
  	Latency: 0
  	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

  00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 48
  	Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
  	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
  	Region 4: I/O ports at 2000 [size=64]
  	Expansion ROM at <unassigned> [disabled]
  	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  		Address: fee00018  Data: 0000
  	Capabilities: [d0] Power Management version 2
  		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [a4] PCI Advanced Features
  		AFCap: TP+ FLR+
  		AFCtrl: FLR-
  		AFStatus: TP-
  	Kernel driver in use: i915

  00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 49
  	Region 0: Memory at f0605000 (64-bit, non-prefetchable) [size=16]
  	Capabilities: [50] Power Management version 3
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee00418  Data: 0000
  	Kernel driver in use: mei_me

  00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 16
  	Region 0: Memory at f060a000 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [58] Debug port: BAR=1 offset=00a0
  	Capabilities: [98] PCI Advanced Features
  		AFCap: TP+ FLR+
  		AFCtrl: FLR-
  		AFStatus: TP-
  	Kernel driver in use: ehci-pci

  00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 51
  	Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=16K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee00478  Data: 0000
  	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  	Capabilities: [100 v1] Virtual Channel
  		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
  		Arb:	Fixed- WRR32- WRR64- WRR128-
  		Ctrl:	ArbSelect=Fixed
  		Status:	InProgress-
  		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
  			Status:	NegoPending- InProgress-
  		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=22
  			Status:	NegoPending- InProgress-
  	Capabilities: [130 v1] Root Complex Link
  		Desc:	PortNumber=0f ComponentID=00 EltType=Config
  		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
  			Addr:	00000000fed1c000
  	Kernel driver in use: snd_hda_intel

  00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
  	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE+
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
  			ClockPM- Surprise- LLActRep+ BwNot-
  		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk-
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  			Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
  			Changed: MRL- PresDet- LinkState-
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  		Address: 00000000  Data: 0000
  	Capabilities: [90] Subsystem: Dell Device [1028:052e]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: pcieport

  00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
  	Memory behind bridge: f0500000-f05fffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE+
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
  			ClockPM- Surprise- LLActRep+ BwNot-
  		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  			Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  			Changed: MRL- PresDet- LinkState+
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  		Address: 00000000  Data: 0000
  	Capabilities: [90] Subsystem: Dell Device [1028:052e]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: pcieport

  00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
  	Memory behind bridge: f0400000-f04fffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0
  			ExtTag- RBE+
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
  			ClockPM- Surprise- LLActRep+ BwNot-
  		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  			Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  			Changed: MRL- PresDet- LinkState+
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  		Address: 00000000  Data: 0000
  	Capabilities: [90] Subsystem: Dell Device [1028:052e]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: pcieport

  00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 23
  	Region 0: Memory at f0609000 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [58] Debug port: BAR=1 offset=00a0
  	Capabilities: [98] PCI Advanced Features
  		AFCap: TP+ FLR+
  		AFCtrl: FLR-
  		AFStatus: TP-
  	Kernel driver in use: ehci-pci

  00:1f.0 ISA bridge [0601]: Intel Corporation QS67 Express Chipset Family LPC Controller [8086:1c4d] (rev 05)
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
  	Kernel driver in use: lpc_ich

  00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 47
  	Region 0: I/O ports at 2088 [size=8]
  	Region 1: I/O ports at 2094 [size=4]
  	Region 2: I/O ports at 2080 [size=8]
  	Region 3: I/O ports at 2090 [size=4]
  	Region 4: I/O ports at 2060 [size=32]
  	Region 5: Memory at f0608000 (32-bit, non-prefetchable) [size=2K]
  	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  		Address: fee002f8  Data: 0000
  	Capabilities: [70] Power Management version 3
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
  	Capabilities: [b0] PCI Advanced Features
  		AFCap: TP+ FLR+
  		AFCtrl: FLR-
  		AFStatus: TP-
  	Kernel driver in use: ahci

  00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Interrupt: pin C routed to IRQ 9
  	Region 0: Memory at f0604000 (64-bit, non-prefetchable) [size=256]
  	Region 4: I/O ports at efa0 [size=32]

  02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6230 [Rainbow Peak] [8086:0091] (rev 34)
  	Subsystem: Intel Corporation Centrino Advanced-N 6230 AGN [8086:5221]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 50
  	Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
  	Capabilities: [c8] Power Management version 3
  		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
  		Address: 00000000fee00438  Data: 0000
  	Capabilities: [e0] Express (v1) Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
  			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <32us
  			ClockPM+ Surprise- LLActRep- BwNot-
  		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  	Capabilities: [100 v1] Advanced Error Reporting
  		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
  	Capabilities: [140 v1] Device Serial Number 00-db-df-ff-ff-15-35-4c
  	Kernel driver in use: iwlwifi

  03:00.0 USB controller [0c03]: Fresco Logic FL1009 USB 3.0 Host Controller [1b73:1009] (rev 02) (prog-if 30 [XHCI])
  	Subsystem: Dell Device [1028:052e]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 19
  	Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=64K]
  	Region 2: Memory at f0410000 (64-bit, non-prefetchable) [size=4K]
  	Region 4: Memory at f0411000 (64-bit, non-prefetchable) [size=4K]
  	Capabilities: [40] Power Management version 3
  		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
  		Address: 0000000000000000  Data: 0000
  	Capabilities: [70] Express (v2) Endpoint, MSI 00
  		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
  			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  			MaxPayload 128 bytes, MaxReadReq 512 bytes
  		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  		LnkCap:	Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
  			ClockPM- Surprise- LLActRep- BwNot-
  		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
  		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
  		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  			 Compliance De-emphasis: -6dB
  		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  	Capabilities: [b0] MSI-X: Enable+ Count=8 Masked-
  		Vector table: BAR=2 offset=00000000
  		PBA: BAR=4 offset=00000000
  	Capabilities: [100 v1] Advanced Error Reporting
  		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  		CESta:	RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr+
  		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
  	Kernel driver in use: xhci_hcd

  ProblemType: KernelOops
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-19-generic 3.13.0-19.40
  ProcVersionSignature: Ubuntu 3.13.0-19.40-generic 3.13.6
  Uname: Linux 3.13.0-19-generic x86_64
  Annotation: This occured during a previous suspend and prevented it from resuming properly.  The resume processing hung very near the end and will have appeared to have completed normally.
  ApportVersion: 2.13.3-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  octavian   2297 F.... pulseaudio
  Date: Tue Mar 25 12:44:07 2014
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: late resume
  HibernationDevice: RESUME=UUID=1da83346-7c13-4000-b36f-ae4618417201
  InstallationDate: Installed on 2014-03-13 (12 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140312)
  InterpreterPath: /usr/bin/python3.4
  MachineType: Dell Inc. Dell System XPS L321X
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-19-generic root=UUID=89332956-4fa1-4da9-916e-5aab560c5483 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-19-generic N/A
   linux-backports-modules-3.13.0-19-generic  N/A
   linux-firmware                             1.126
  SourcePackage: linux
  Title: [Dell Inc. Dell System XPS L321X] late resume failure
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 01/22/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A08
  dmi.board.name: 0Y4RM9
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: dmi:bvnDellInc.:bvrA08:bd01/22/2013:svnDellInc.:pnDellSystemXPSL321X:pvr:rvnDellInc.:rn0Y4RM9:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: Dell System XPS L321X
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1297430/+subscriptions


References