← Back to team overview

kernel-packages team mailing list archive

[Bug 1300751] Re: [Hewlett-Packard HP Compaq dc5800 Small Form Factor] suspend/resume failure

 

** Description changed:

  Ubuntu 3.13.0-20.42-generic 3.13.7
- 
- 00:00.0 Host bridge [0600]: Intel Corporation 82Q33 Express DRAM Controller [8086:29d0] (rev 02)
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- 	Latency: 0
- 	Capabilities: [e0] Vendor Specific Information: Len=0b <?>
- 	Kernel driver in use: agpgart-intel
- 
- 00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q33 Express Integrated Graphics Controller [8086:29d2] (rev 02) (prog-if 00 [VGA controller])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 44
- 	Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=512K]
- 	Region 1: I/O ports at 1240 [size=8]
- 	Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
- 	Region 3: Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
- 	Expansion ROM at <unassigned> [disabled]
- 	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
- 		Address: fee0300c  Data: 41e1
- 	Capabilities: [d0] Power Management version 2
- 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Kernel driver in use: i915
- 
- 00:03.0 Communication controller [0780]: Intel Corporation 82Q33 Express MEI Controller [8086:29d4] (rev 02)
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 43
- 	Region 0: Memory at f01a5900 (64-bit, non-prefetchable) [size=16]
- 	Capabilities: [50] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
- 		Address: 00000000fee0300c  Data: 41d1
- 	Kernel driver in use: mei_me
- 
- 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin B routed to IRQ 42
- 	Region 0: Memory at f0180000 (32-bit, non-prefetchable) [size=128K]
- 	Region 1: Memory at f01a4000 (32-bit, non-prefetchable) [size=4K]
- 	Region 2: I/O ports at 1100 [size=32]
- 	Capabilities: [c8] Power Management version 2
- 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
- 	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
- 		Address: 00000000fee0100c  Data: 4152
- 	Capabilities: [e0] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: e1000e
- 
- 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 20
- 	Region 4: I/O ports at 1120 [size=32]
- 	Capabilities: [50] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: uhci_hcd
- 
- 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin B routed to IRQ 21
- 	Region 4: I/O ports at 1140 [size=32]
- 	Capabilities: [50] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: uhci_hcd
- 
- 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin C routed to IRQ 22
- 	Region 4: I/O ports at 1160 [size=32]
- 	Capabilities: [50] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: uhci_hcd
- 
- 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin C routed to IRQ 22
- 	Region 0: Memory at f01a5000 (32-bit, non-prefetchable) [size=1K]
- 	Capabilities: [50] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [58] Debug port: BAR=1 offset=00a0
- 	Capabilities: [98] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: ehci-pci
- 
- 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 64 bytes
- 	Interrupt: pin A routed to IRQ 45
- 	Region 0: Memory at f01a0000 (64-bit, non-prefetchable) [size=16K]
- 	Capabilities: [50] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
- 		Address: 00000000fee0300c  Data: 4122
- 	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
- 		DevCap:	MaxPayload 128 bytes, PhantFunc 0
- 			ExtTag- RBE-
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- 			MaxPayload 128 bytes, MaxReadReq 128 bytes
- 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed- WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=Fixed
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- 			Status:	NegoPending- InProgress-
- 		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=80
- 			Status:	NegoPending- InProgress-
- 	Capabilities: [130 v1] Root Complex Link
- 		Desc:	PortNumber=0f ComponentID=02 EltType=Config
- 		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- 			Addr:	00000000fed1c000
- 	Kernel driver in use: snd_hda_intel
- 
- 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 64 bytes
- 	Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
- 	I/O behind bridge: 00002000-00002fff
- 	Memory behind bridge: f8000000-f81fffff
- 	Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff
- 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- 	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- 		DevCap:	MaxPayload 128 bytes, PhantFunc 0
- 			ExtTag- RBE+
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- 			MaxPayload 128 bytes, MaxReadReq 128 bytes
- 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- 		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
- 			ClockPM- Surprise- LLActRep+ BwNot-
- 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
- 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- 		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- 			Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
- 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- 			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- 			Changed: MRL- PresDet- LinkState-
- 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- 		RootCap: CRSVisible-
- 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- 		Address: fee0300c  Data: 4171
- 	Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Capabilities: [a0] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed+ WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=Fixed
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- 			Status:	NegoPending- InProgress-
- 	Capabilities: [180 v1] Root Complex Link
- 		Desc:	PortNumber=01 ComponentID=02 EltType=Config
- 		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- 			Addr:	00000000fed1c000
- 	Kernel driver in use: pcieport
- 
- 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02) (prog-if 00 [Normal decode])
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 64 bytes
- 	Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
- 	I/O behind bridge: 00003000-00003fff
- 	Memory behind bridge: f8400000-f85fffff
- 	Prefetchable memory behind bridge: 00000000f8600000-00000000f87fffff
- 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- 	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- 		DevCap:	MaxPayload 128 bytes, PhantFunc 0
- 			ExtTag- RBE+
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- 			MaxPayload 128 bytes, MaxReadReq 128 bytes
- 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- 		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
- 			ClockPM- Surprise- LLActRep+ BwNot-
- 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
- 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- 		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- 			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
- 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- 			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- 			Changed: MRL- PresDet- LinkState-
- 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- 		RootCap: CRSVisible-
- 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- 		Address: fee0300c  Data: 4181
- 	Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Capabilities: [a0] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed+ WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=Fixed
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- 			Status:	NegoPending- InProgress-
- 	Capabilities: [180 v1] Root Complex Link
- 		Desc:	PortNumber=02 ComponentID=02 EltType=Config
- 		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- 			Addr:	00000000fed1c000
- 	Kernel driver in use: pcieport
- 
- 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 20
- 	Region 4: I/O ports at 1180 [size=32]
- 	Capabilities: [50] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: uhci_hcd
- 
- 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin B routed to IRQ 21
- 	Region 4: I/O ports at 11a0 [size=32]
- 	Capabilities: [50] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: uhci_hcd
- 
- 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin C routed to IRQ 22
- 	Region 4: I/O ports at 11c0 [size=32]
- 	Capabilities: [50] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: uhci_hcd
- 
- 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 20
- 	Region 0: Memory at f01a5400 (32-bit, non-prefetchable) [size=1K]
- 	Capabilities: [50] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [58] Debug port: BAR=1 offset=00a0
- 	Capabilities: [98] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: ehci-pci
- 
- 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
- 	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- 	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 	Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:281e]
- 
- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
- 	Kernel driver in use: lpc_ich
- 
- 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8a [Master SecP PriP])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin B routed to IRQ 18
- 	Region 0: I/O ports at 01f0 [size=8]
- 	Region 1: I/O ports at 03f4
- 	Region 2: I/O ports at 0170 [size=8]
- 	Region 3: I/O ports at 0374
- 	Region 4: I/O ports at 1200 [size=16]
- 	Region 5: I/O ports at 1210 [size=16]
- 	Capabilities: [70] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [b0] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: ata_piix
- 
- 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
- 	Subsystem: Hewlett-Packard Company Device [103c:281e]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin B routed to IRQ 18
- 	Region 0: I/O ports at 1258 [size=8]
- 	Region 1: I/O ports at 1270 [size=4]
- 	Region 2: I/O ports at 1260 [size=8]
- 	Region 3: I/O ports at 1274 [size=4]
- 	Region 4: I/O ports at 1220 [size=16]
- 	Region 5: I/O ports at 1230 [size=16]
- 	Capabilities: [70] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [b0] PCI Advanced Features
- 		AFCap: TP+ FLR+
- 		AFCtrl: FLR-
- 		AFStatus: TP-
- 	Kernel driver in use: ata_piix
  
  ProblemType: KernelOops
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-20-generic 3.13.0-20.42
  ProcVersionSignature: Ubuntu 3.13.0-20.42-generic 3.13.7
  Uname: Linux 3.13.0-20-generic x86_64
  Annotation: This occured during a previous suspend and prevented it from resuming properly.
  ApportVersion: 2.14-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
-  USER        PID ACCESS COMMAND
-  /dev/snd/controlC0:  mrsmccormack   1731 F.... pulseaudio
+  USER        PID ACCESS COMMAND
+  /dev/snd/controlC0:  mrsmccormack   1731 F.... pulseaudio
  Date: Mon Mar 31 13:30:33 2014
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=f268788a-e1ad-4434-8fe2-897c262f7da7
  InstallationDate: Installed on 2014-03-31 (0 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Beta amd64 (20140326)
  InterpreterPath: /usr/bin/python3.4
  IwConfig:
-  eth0      no wireless extensions.
-  
-  lo        no wireless extensions.
+  eth0      no wireless extensions.
+ 
+  lo        no wireless extensions.
  MachineType: Hewlett-Packard HP Compaq dc5800 Small Form Factor
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
-  TERM=linux
-  PATH=(custom, no user)
+  TERM=linux
+  PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-20-generic root=UUID=69971027-9152-48fb-8f54-4fa913903835 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
-  linux-restricted-modules-3.13.0-20-generic N/A
-  linux-backports-modules-3.13.0-20-generic  N/A
-  linux-firmware                             1.126
+  linux-restricted-modules-3.13.0-20-generic N/A
+  linux-backports-modules-3.13.0-20-generic  N/A
+  linux-firmware                             1.126
  RfKill:
-  
+ 
  SourcePackage: linux
  Title: [Hewlett-Packard HP Compaq dc5800 Small Form Factor] suspend/resume failure
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
-  
+ 
  dmi.bios.date: 03/11/2008
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 786F2 v01.06
  dmi.board.asset.tag: 2UA8320NX2
  dmi.board.name: 2820h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: 2UA8320NX2
  dmi.chassis.type: 4
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: dmi:bvnHewlett-Packard:bvr786F2v01.06:bd03/11/2008:svnHewlett-Packard:pnHPCompaqdc5800SmallFormFactor:pvr:rvnHewlett-Packard:rn2820h:rvr:cvnHewlett-Packard:ct4:cvr:
  dmi.product.name: HP Compaq dc5800 Small Form Factor
  dmi.sys.vendor: Hewlett-Packard

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1300751

Title:
  [Hewlett-Packard HP Compaq dc5800 Small Form Factor] suspend/resume
  failure

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Ubuntu 3.13.0-20.42-generic 3.13.7

  ProblemType: KernelOops
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-20-generic 3.13.0-20.42
  ProcVersionSignature: Ubuntu 3.13.0-20.42-generic 3.13.7
  Uname: Linux 3.13.0-20-generic x86_64
  Annotation: This occured during a previous suspend and prevented it from resuming properly.
  ApportVersion: 2.14-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  mrsmccormack   1731 F.... pulseaudio
  Date: Mon Mar 31 13:30:33 2014
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=f268788a-e1ad-4434-8fe2-897c262f7da7
  InstallationDate: Installed on 2014-03-31 (0 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Beta amd64 (20140326)
  InterpreterPath: /usr/bin/python3.4
  IwConfig:
   eth0      no wireless extensions.

   lo        no wireless extensions.
  MachineType: Hewlett-Packard HP Compaq dc5800 Small Form Factor
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-20-generic root=UUID=69971027-9152-48fb-8f54-4fa913903835 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-20-generic N/A
   linux-backports-modules-3.13.0-20-generic  N/A
   linux-firmware                             1.126
  RfKill:

  SourcePackage: linux
  Title: [Hewlett-Packard HP Compaq dc5800 Small Form Factor] suspend/resume failure
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 03/11/2008
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 786F2 v01.06
  dmi.board.asset.tag: 2UA8320NX2
  dmi.board.name: 2820h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: 2UA8320NX2
  dmi.chassis.type: 4
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: dmi:bvnHewlett-Packard:bvr786F2v01.06:bd03/11/2008:svnHewlett-Packard:pnHPCompaqdc5800SmallFormFactor:pvr:rvnHewlett-Packard:rn2820h:rvr:cvnHewlett-Packard:ct4:cvr:
  dmi.product.name: HP Compaq dc5800 Small Form Factor
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1300751/+subscriptions


References