← Back to team overview

kernel-packages team mailing list archive

[Bug 864750] Re: Realtek R8111E not working in Oneiric

 

This bugs seems to re-open in trusty (ubuntu 14.04) in april 2014, while
tying a new GIGABYTE motherboard (H61N-USB3) with a RTL8111E chip !

The loaded module is the r8169 :
/sys/class/net/eth0/device/driver/module -> ../../../../module/r8169

$ lspci -vnvn
...
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
	Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: I/O ports at ee00 [size=256]
	Region 2: Memory at fbdff000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at fbdf8000 (64-bit, prefetchable) [size=16K] 
	Capabilities: <access denied>
	Kernel driver in use: r8169

$ lsmod| grep r81
r8169                  67581  0 
mii                    13934  3 asix,r8169,usbnet

The card LED blinks (green & orange), but "no connexion" to the local
network (thru DHCP).

So I connected a NET2USB key in order to access to the network ... on
eth1

$ ethtool eth0
Settings for eth0:
	Supported ports: [ TP MII ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Advertised pause frame use: Symmetric Receive-only
	Advertised auto-negotiation: Yes
	Speed: 10Mb/s
	Duplex: Half
	Port: MII
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
	Current message level: 0x00000033 (51)
			       drv probe ifdown ifup
	Link detected: no


I 'll retry the "new driver" proposed by REALTEK, but it doesn't seem to work (r8168-8.038.00, builded on 2014/01/08) !

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/864750

Title:
  Realtek R8111E not working in Oneiric

Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  Network appears to work until it suddenly stops. Packets are being
  dropped for no apparent reason. Kernel log is full of this:

  Oct 02 09:13:25 machine kernel: r8169 0000:04:00.0: eth0: link up
  Oct 02 12:45:17 machine kernel: r8169 0000:04:00.0: eth0: link up
  Oct 02 12:45:20 machine kernel: r8169 0000:04:00.0: eth0: link up
  Oct 02 13:15:12 machine kernel: r8169 0000:04:00.0: eth0: link up
  Oct 02 13:15:13 machine kernel: r8169 0000:04:00.0: eth0: link up
  Oct 02 13:22:13 machine kernel: r8169 0000:04:00.0: eth0: link up

  Sometimes there are longer pauses between 'link up' messages and
  during that time network is not working.

  Upon investigating a little, I found out that there's an official
  Realtek driver for 8111E. Stock r8169 driver is faulty for some reason
  and it doesn't work. Compiling and installing of the official driver
  wasn't smooth, but in the end the newly compiled r8168 (note the
  different number) did work. Installation required renaming/removing
  r8169.ko to prevent it from loading.

  Original driver can be obtained here:
  http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

  I've noticed that this problem has been around for quite some time
  (2009 I believe) and no simple solution is offered. RTL 8111E  is
  quite common and a lot of people will have problems with this. :(

  I am running current Oneiric.

  bigwhale@thefish:~$ sudo cat /proc/version_signature
  Ubuntu 3.0.0-11.18-generic 3.0.4
  bigwhale@thefish:~$
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 1.23-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC3:  bigwhale   1854 F.... pulseaudio
   /dev/snd/controlC2:  bigwhale   1854 F.... pulseaudio
   /dev/snd/controlC0:  bigwhale   1854 F.... pulseaudio
   /dev/snd/controlC1:  bigwhale   1854 F.... pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'Device'/'C-Media Electronics Inc. USB PnP Sound Device at usb-0000:00:1a.0-1.4.2, full s'
     Mixer name	: 'USB Mixer'
     Components	: 'USB0d8c:013c'
     Controls      : 5
     Simple ctrls  : 3
  Card1.Amixer.info:
   Card hw:1 'P1330NC'/'Philips Philips SPC 1330NC at usb-0000:00:1a.0-1.6, high speed'
     Mixer name	: 'USB Mixer'
     Components	: 'USB0471:2037'
     Controls      : 2
     Simple ctrls  : 1
  Card2.Amixer.info:
   Card hw:2 'PCH'/'HDA Intel PCH at 0xfbff8000 irq 44'
     Mixer name	: 'Realtek ALC889'
     Components	: 'HDA:10ec0889,1458a002,00100004'
     Controls      : 41
     Simple ctrls  : 23
  Card3.Amixer.info:
   Card hw:3 'Generic'/'HD-Audio Generic at 0xfbdfc000 irq 45'
     Mixer name	: 'ATI R6xx HDMI'
     Components	: 'HDA:1002aa01,00aa0100,00100200'
     Controls      : 4
     Simple ctrls  : 1
  Card3.Amixer.values:
   Simple mixer control 'IEC958',0
     Capabilities: pswitch pswitch-joined penum
     Playback channels: Mono
     Mono: Playback [on]
  DistroRelease: Ubuntu 11.10
  HibernationDevice: RESUME=UUID=428fe51e-fc39-4181-996d-1059d1c53250
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta amd64 (20110922)
  IwConfig:
   lo        no wireless extensions.
   
   eth0      no wireless extensions.
  MachineType: Gigabyte Technology Co., Ltd. P67A-D3-B3
  Package: linux (not installed)
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=b6c09f93-2315-4994-84f3-bb8e45089bbf ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.0.0-11.18-generic 3.0.4
  PulseSinks: Error: command ['pacmd', 'list-sinks'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  PulseSources: Error: command ['pacmd', 'list-sources'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.0.0-11-generic N/A
   linux-backports-modules-3.0.0-11-generic  N/A
   linux-firmware                            1.60
  RfKill:
   
  StagingDrivers: mei
  Tags:  oneiric staging
  Uname: Linux 3.0.0-11-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/03/2011
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F1
  dmi.board.name: P67A-D3-B3
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF1:bd03/03/2011:svnGigabyteTechnologyCo.,Ltd.:pnP67A-D3-B3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP67A-D3-B3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: P67A-D3-B3
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/864750/+subscriptions